Доступ предоставлен для: Guest
Архив
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017)


ISBN Онлайн: 978-1-56700-478-6

MATERIAL DEVELOPMENT FROM RICE HUSK FOR CO2 CAPTURE

DOI: 10.1615/IHMTC-2017.2020
pages 1463-1466

Premanath Murge
Department of Chemical Engineering, BITS Pilani Hyderabad Campus, Hyderabad-500078, Telangana, India

Srikanta Dinda
Department of Chemical Engineering, BITS Pilani Hyderabad Campus, Hyderabad-500078, Telangana, India

Bipin Chakravarthy
Department of Chemical Engineering, BITS Pilani Hyderabad Campus, Hyderabad-500078, Telangana, India

Sounak Roy
Department of Chemical Engineering, BITS Pilani Hyderabad Campus, Hyderabad-500078, Telangana, India

Аннотация

In the study, activated carbon material was prepared from pyrolyzed rice husk (RH) for the capture of CO2 from simulated flue gas. The measured (Brunauer−Emmett−Teller) BET surface area of the carbon material was around 340 m2/gm. Two amines, namely monoethanol amine (MEA) and ethylene diamine (EDA) were loaded on the carbon support material to prepare the active adsorbent. The CO2 adsorption study was carried with the in-house developed adsorbents using simulated flue gas at 30 °C. Stability of the sorbent was tested by cyclic regeneration and reuse of the same material for CO2 adsorption. There was no substantial improvement in the CO2 adsorption capacity when piperazine (PZ) was used as promoter for low amine loading on RH but not significant on higher amine loading. The sorbents were studied for 3 cycles and it was observed that sorbent was stable. The highest average adsorption capacity was 48.9 g of CO2/ kg of sorbent for 2.5MEA-PZ-RH sample.