Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
International Journal of Fluid Mechanics Research
ESCI SJR: 0.206 SNIP: 0.446 CiteScore™: 0.5

ISSN Печать: 2152-5102
ISSN Онлайн: 2152-5110

Выпуски:
Том 46, 2019 Том 45, 2018 Том 44, 2017 Том 43, 2016 Том 42, 2015 Том 41, 2014 Том 40, 2013 Том 39, 2012 Том 38, 2011 Том 37, 2010 Том 36, 2009 Том 35, 2008 Том 34, 2007 Том 33, 2006 Том 32, 2005 Том 31, 2004 Том 30, 2003 Том 29, 2002 Том 28, 2001 Том 27, 2000 Том 26, 1999 Том 25, 1998 Том 24, 1997 Том 23, 1996 Том 22, 1995

International Journal of Fluid Mechanics Research

DOI: 10.1615/InterJFluidMechRes.v24.i4-6.20
pages 461-470

Effects of the Internal Flow in a Nozzle Hole on the Breakup Processes of a Liquid Jet

N. Tamaki
Department of Mechanical Engineering, Kinki University Takaya, Umenobe, Higashi Hiroshima, 739-2116, Japan
Keiya Nishida
Department of Mechanical System Engineering, University of Hiroshima, 1-4-1 Kagamiyama, Higashi-Hiroshima, Hiroshima 739-8527, Japan
Hiroyuki Hiroyasu
Institute of Industrial Technology, Kinki University, Higashi-Hiroshima, Japan
M. Shimizu
Department of Mechanical Engineering, Kinki University Takaya, Umenobe, Higashi Hiroshima, 739-2116, Japan

Краткое описание

The purpose of this study is to clarify the breakup mechanism of a high speed liquid jet, by investigating the mutual relationship between the internal flow in the nozzle hole and the disintegration behavior of the liquid jet. In order to clarify the effects of the internal flow in the nozzle hole on the spray characteristics, experiments wane performed under conditions ranging from atmospheric to high ambient pressures, by using transparent nozzles with various length-to-diameter ratios of the nozzle hole L/D and the inlet shapes of the nozzle hole. The behaviors of the internal flow in the nozzle hole and the disintegration behavior of the liquid jets were observed by the photographic technique. Moreover, the vibration accelerations associated with disturbances in the nozzle hole were measured using a piezoelectric acceleration transducer, in order to quantify the magnitude of the disturbance of the liquid flow in the nozzle hole. It was shown that the vibration acceleration level VAL was proportional to the magnitude of the disturbance in the nozzle hole. As a consequence of this study, it has been determined that the important factor in the breakup processes of the liquid jet was the disturbance of the liquid flow due to cavitation phenomena.


Articles with similar content:

EFFECTS OF CAVITATION AND INTERNAL FLOW ON ATOMIZATION OF A LIQUID JET
Atomization and Sprays, Vol.8, 1998, issue 2
Keiya Nishida, Hiroyuki Hiroyasu, N. Tamaki, M. Shimizu
EXPERIMENTAL AND NUMERICAL STUDIES ON SPRAY CHARACTERISTICS OF AN INTERNAL OSCILLATING NOZZLE
Atomization and Sprays, Vol.29, 2019, issue 1
Wenbo Zhao, Wei Xie, Zhijun Wu, Liguang Li, Zongjie Hu, Jiachen Zhai, Yufeng Wang
SPRAY BREAKUP MECHANISM FROM THE HOLE-TYPE NOZZLE AND ITS APPLICATIONS
Atomization and Sprays, Vol.10, 2000, issue 3-5
Hiroyuki Hiroyasu
PRELIMINARY INVESTIGATION ON THE SPREADING ANGLE OF A NEAR-CRITICAL RP-3 KEROSENE JET
Atomization and Sprays, Vol.25, 2015, issue 11
Zhencen Fan, Wei Fan, Le Jin, Zhou Zhou, Jin Zhang
THE INFLUENCE OF DESIGN PARAMETERS ON THE INITIAL SPRAY CHARACTERISTICS OF THE HIGH-PRESSURE AIR INCLUSION NOZZLE
Atomization and Sprays, Vol.26, 2016, issue 4
Haijun Yan, Kazuhiro Nakano, Shintaroh Ohashi, Geng Bai, Tomomichi Mizukami, Somsak Kramchote