Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
International Journal of Fluid Mechanics Research
ESCI SJR: 0.206 SNIP: 0.446 CiteScore™: 0.5

ISSN Печать: 2152-5102
ISSN Онлайн: 2152-5110

Выпуски:
Том 46, 2019 Том 45, 2018 Том 44, 2017 Том 43, 2016 Том 42, 2015 Том 41, 2014 Том 40, 2013 Том 39, 2012 Том 38, 2011 Том 37, 2010 Том 36, 2009 Том 35, 2008 Том 34, 2007 Том 33, 2006 Том 32, 2005 Том 31, 2004 Том 30, 2003 Том 29, 2002 Том 28, 2001 Том 27, 2000 Том 26, 1999 Том 25, 1998 Том 24, 1997 Том 23, 1996 Том 22, 1995

International Journal of Fluid Mechanics Research

DOI: 10.1615/InterJFluidMechRes.v24.i4-6.320
pages 769-779

Development of a Diesel Spray Atomization Model Considering Nozzle Flow Characteristics

Eunju Lee
Department of Mechanical Engineering, Pohang University of Science & Technology, Pohang, Korea
Kang Y. Huh
Mechanical Engineering Department, Pohang University of Science and Technology, Pohang, Korea
Jaye Koo
School of Aerospace and Mechanical Engineering, Korea Aerospace University, Goyang, Gyeonggi, 412-791, Republic of Korea

Краткое описание

An atomization model for plain orifice diesel fuel sprays is developed, which considers both turbulent fluctuation in the jet flow and wave growth by gas inertia force due to the jet velocity. It is assumed that the atomization time scale is the sum of the turbulent and wave growth time scale while the atomization length scale is given by the integral length scale of turbulence. The developed atomization model is implemented in the KIVA code in terms of two numerically different groups, the primary and secondary drop parcels. The computation results are in good agreement with the experimental data for the drop size distribution from Phase Doppler Particle Anemometry (PDPA) as well as the spray tip penetration and spray shape.


Articles with similar content:

DIESEL SPRAY ATOMIZATION MODEL CONSIDERING NOZZLE EXIT TURBULENCE CONDITIONS
Atomization and Sprays, Vol.8, 1998, issue 4
Kang Y. Huh, Eunju Lee, Jaye Koo
LINKING NOZZLE FLOW WITH SPRAY CHARACTERISTICS IN A DIESEL FUEL INJECTION SYSTEM
Atomization and Sprays, Vol.8, 1998, issue 3
Manolis Gavaises, C. Arcoumanis
AN ENGINEERING MODEL FOR THE FUEL SPRAY FORMATION OF DEFORMING DROPLETS
Atomization and Sprays, Vol.14, 2004, issue 4
William Kvasnak, David J. Schmidt, Goodarz Ahmadi
SCALING OF SPRAY PENETRATION WITH EVAPORATION
Atomization and Sprays, Vol.9, 1999, issue 2
Yuepeng Wan, Norbert Peters
MODELING OF GROUP-HOLE-NOZZLE SPRAYS USING GRID-SIZE-, HOLE-LOCATION-, AND TIME-STEP-INDEPENDENT MODELS
Atomization and Sprays, Vol.19, 2009, issue 6
Rolf D. Reitz, Chang Sik Lee, Neerav Abani, Sung Wook Park, Hyun Kyu Suh