Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
International Journal of Fluid Mechanics Research
ESCI SJR: 0.206 SNIP: 0.446 CiteScore™: 0.5

ISSN Печать: 2152-5102
ISSN Онлайн: 2152-5110

Выпуски:
Том 46, 2019 Том 45, 2018 Том 44, 2017 Том 43, 2016 Том 42, 2015 Том 41, 2014 Том 40, 2013 Том 39, 2012 Том 38, 2011 Том 37, 2010 Том 36, 2009 Том 35, 2008 Том 34, 2007 Том 33, 2006 Том 32, 2005 Том 31, 2004 Том 30, 2003 Том 29, 2002 Том 28, 2001 Том 27, 2000 Том 26, 1999 Том 25, 1998 Том 24, 1997 Том 23, 1996 Том 22, 1995

International Journal of Fluid Mechanics Research

DOI: 10.1615/InterJFluidMechRes.v24.i4-6.180
pages 623-632

Metal Solidification during Spray Forming

Udo Fritsching
Department of Particles and Process Engineering, University of Bremen; Foundation Institute of Materials Science, Badgasteiner Str. 3, D-28359 Bremen, Germany
D. Bergmann
Chemical Engineering Department, University Bremen, Germany
Klaus Bauckhage
Chemical Engineering Department, University of Bremen, Bremen, Germany

Краткое описание

An essential feature of the spray forming process for the production of near net shaped metal products is a suitable composition of the spray cone prior to impingement onto the substrate or deposit. Excellent product qualities and homogeneities need a mixture of particles in different stages of their individual solidification. Modeling of phase change behavior of metal melts is an important part of an overall thermal modeling of the process. Control of the solidification process is one of the key issues in spray forming research. The thermal history of a metal element from superheating (in advance of the atomization process) via solidification and cooling to room temperature has significant influence on the resulting material properties of the product. Dependent on the alloy composition, individual solidification models must be derived. This contribution describes the droplet solidification in flight in the spray cone and further on in the resulting deposit during spray forming for a steel alloy. For the simulation of the spray cone behavior, a multiphase flow model is established including momentum and thermal coupling. The description of the transient thermal conditions in the sprayed deposit, including necessary boundary conditions, is derived in a general coordinate based heat conduction algorithm.


Articles with similar content:

HEAT AND FLUID FLOW ANALYSIS DURING CASTING PROCESS USING AN IMPLICIT FILLING ALGORITHM
International Heat Transfer Conference 11, Vol.20, 1998, issue
Kwan-Soo Lee, Ik-Tae Im, Woo-Seung Kim
RAPID SOLIDIFICATION: FUNDAMENTALS AND MODELING
Annual Review of Heat Transfer, Vol.11, 2000, issue 11
Guo-Xiang Wang, Vishwanath Prasad
ANALYSIS OF THERMAL EFFECTS ON FRAGMENTATION OF SODIUM SPRAY DROPLETS IN INERT GAS ENVIRONMENT
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Vol.0, 2017, issue
P. Selvaraj, P. Mangarjuna Rao, B. K. Nashine, S. Muthusaravanan
THERMAL MODELLING OF COMPOSITE IRON/ALUMINA PARTICLES SPRAYED UNDER PLASMA CONDITIONS PART I: PURE CONDUCTION
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.7, 2003, issue 4
M. Bouneder, Bernard Pateyron, Pierre Fauchais
RAPID SOLIDIFICATION STUDY OF STABILIZED ZIRCONIA UNDER PLASMA SPRAYING
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.10, 2006, issue 2
Habib Sammouda, S. Ben Naoua, Pierre Fauchais