Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Atomization and Sprays
Импакт фактор: 1.737 5-летний Импакт фактор: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684

Выпуски:
Том 30, 2020 Том 29, 2019 Том 28, 2018 Том 27, 2017 Том 26, 2016 Том 25, 2015 Том 24, 2014 Том 23, 2013 Том 22, 2012 Том 21, 2011 Том 20, 2010 Том 19, 2009 Том 18, 2008 Том 17, 2007 Том 16, 2006 Том 15, 2005 Том 14, 2004 Том 13, 2003 Том 12, 2002 Том 11, 2001 Том 10, 2000 Том 9, 1999 Том 8, 1998 Том 7, 1997 Том 6, 1996 Том 5, 1995 Том 4, 1994 Том 3, 1993 Том 2, 1992 Том 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2017020419
pages 691-706

INFLUENCE OF PIEZO-DRIVEN SYNTHETIC JET ON WATER SPRAY BEHAVIOR

Matteo Chiatto
Department of Industrial Engineering, University of Naples "Federico II," Naples, 80125, Italy
Luca Marchitto
Istituto Motori-CNR
G. Valentino
IstitutoMotori, CNR, Naples, 80125, Italy
Luigi de Luca
Department of Industrial Engineering, University of Naples "Federico II," Naples, 80125, Italy

Краткое описание

The opportunity of directly managing the spray formation and its characteristics has gained much interest in the last few years, due to the various active flow control methods available nowadays. In this work particle image velocimetry (PIV) has been applied to investigate the effect of a piezo-driven synthetic jet (SJ) on the droplet velocity distribution of a water spray. Tests were carried out under atmospheric conditions within a chamber test rig, equipped with optical accesses, at two injection pressures, namely, 5 and 10 MPa, exploring the variation of the spray flow field caused by the synthetic jet perturbations. The SJ orifice axis has been placed 45 deg tilted with respect to the water spray axis, and the nozzle body has been moved along its own axis for three different positions. PIV measurements have been averaged on 300 trials. For each operation condition, the actual influence region of the SJ has been evaluated through a T-test algorithm. The synthetic jet locally interacts with the spray, remarkably energizing the region downstream of the impact. The effectiveness of the actuator decreases for higher injection pressures and shorter distances between spray nozzle and SJ orifice. The study has been corroborated by a vorticity field analysis, which is able to identify the influence of coherent vortex structures generated by the air jet, in terms of both droplet momentum and droplet spreading variations.

Ключевые слова: water spray, synthetic jet, active flow control

Articles with similar content:

CHARACTERIZATION OF n-BUTANOL AND GASOLINE SPRAY FROM A MULTIHOLE INJECTOR USING PHASE DOPPLER ANEMOMETRY
Atomization and Sprays, Vol.25, 2015, issue 12
Simona Silvia Merola, S. Nava Igual, Luca Marchitto, C. Tornatore, G. Valentino
DIESEL SPRAY VISUALIZATION AND SHOCKWAVES
Atomization and Sprays, Vol.20, 2010, issue 3
Harri Hillamo, Martti Larmi, Ossi Kaario, Ville Vuorinen, Teemu Sarjovaara
EXPERIMENTAL INVESTIGATIONS ON A PIEZO-ACTIVATED HOLLOW CONE INJECTOR − PART II: THE INFLUENCE OF NEEDLE LIFT ON DROPLET SIZE DISTRIBUTIONS AND VORTEX FORMATION
Atomization and Sprays, Vol.24, 2014, issue 10
Graham Wigley, Konstantinos Boulouchos, B. Schneider, Andreas Schmid
SPRAY DISPERSION IN A COUNTER-SWIRLING DOUBLE-ANNULAR AIR FLOW AT GAS TURBINE CONDITIONS
Atomization and Sprays, Vol.14, 2004, issue 1
Daniel Heitz, Christoph Hassa, Julian Becker
TIMEWISE VARIATION OF TURBULENT JET DIFFUSION FLAME SHAPE BY MEANS OF IMAGE PROCESSING
Journal of Flow Visualization and Image Processing, Vol.5, 1998, issue 4
Toshiaki Yano, Naoko Iino, Fumihiro Tsuchino