Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Atomization and Sprays
Импакт фактор: 1.737 5-летний Импакт фактор: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684

Выпуски:
Том 30, 2020 Том 29, 2019 Том 28, 2018 Том 27, 2017 Том 26, 2016 Том 25, 2015 Том 24, 2014 Том 23, 2013 Том 22, 2012 Том 21, 2011 Том 20, 2010 Том 19, 2009 Том 18, 2008 Том 17, 2007 Том 16, 2006 Том 15, 2005 Том 14, 2004 Том 13, 2003 Том 12, 2002 Том 11, 2001 Том 10, 2000 Том 9, 1999 Том 8, 1998 Том 7, 1997 Том 6, 1996 Том 5, 1995 Том 4, 1994 Том 3, 1993 Том 2, 1992 Том 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v6.i2.60
pages 227-244

SHEAR COAXIAL INJECTOR ATOMIZATION PHENOMENA FOR COMBUSTING AND NONCOMBUSTING CONDITIONS

Sibtosh Pal
Propulsion Engineering Research Center and Department of Mechanical Engineering, The Pennsylvania State University, University Park, Pennsylvania, USA
M. D. Moser
Propulsion Engineering Research Center and Department of Mechanical Engineering, The Pennsylvania State University, University Park, Pennsylvania, USA
H. M. Ryan
Propulsion Engineering Research Center and Department of Mechanical Engineering, The Pennsylvania State University, University Park, Pennsylvania, USA
M. J. Foust
Propulsion Engineering Research Center and Department of Mechanical Engineering, The Pennsylvania State University, University Park, Pennsylvania, USA
Robert J. Santoro
Propulsion Engineering Research Center and Department of Mechanical Engineering, The Pennsylvania State University, University Park, Pennsylvania

Краткое описание

Measurements of liquid oxygen (LOX) drop size and velocity in a unielement liquid-propellant rocket chamber are presented along with complementary measurements of drop size/velocity for simulants under cold flow conditions. The drop size comparisons between the cold flow and hot-fire conditions showed that the drops were larger for combusting conditions. This observation is argued to be consistent with effects due to differences in the flow fields between hot-fire and cold flow conditions and more rapid vaporization of smaller drops under combusting conditions. The use of the phase Doppler particle analyzer (PDPA) in obtaining temporally averaged probability density functions of drop size in a harsh rocket environment has been demonstrated. The PDPA measurements indicate that the atomization process is characterized by either the presence of nonspherical liquid structures or the production of extensive dense drop regions under these conditions. Finally, the need for more extensive studies under a wider variety of chamber conditions is indicated.


Articles with similar content:

TURBULENT SPRAYS IN STAGNATION FLOWS
Atomization and Sprays, Vol.5, 1995, issue 3
S. C. Li, P. A. Libby, Forman A. Williams
DROPLET SIZE AND VELOCITY MEASUREMENTS IN A CRYOGENIC JET FLAME OF A ROCKET-TYPE COMBUSTOR USING HIGH-SPEED IMAGING
Atomization and Sprays, Vol.26, 2016, issue 5
Yves Le Sant, Arnaud Ristori, Lucien Vingert, Nicolas Fdida
USE OF MINERAL DIESEL, FIRST-, AND SECOND-GENERATION BIODIESELS IN MODERN COMMON RAIL INJECTION SYSTEMS UNDER NONEVAPORATIVE AND EVAPORATIVE CONDITIONS
Atomization and Sprays, Vol.22, 2012, issue 2
L. Allocca, Alessandro Montanaro, Ezio Mancaruso, Bianca Maria Vaglieco
SPRAY DISPERSION IN A COUNTER-SWIRLING DOUBLE-ANNULAR AIR FLOW AT GAS TURBINE CONDITIONS
Atomization and Sprays, Vol.14, 2004, issue 1
Daniel Heitz, Christoph Hassa, Julian Becker
CHARACTERIZATION OF A SPRAY GENERATED BY AN AIRBLAST ATOMIZERWITH PREFILMER
Atomization and Sprays, Vol.20, 2010, issue 10
Feras Z. Batarseh, Ilia V. Roisman, Cameron Tropea