Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Atomization and Sprays
Импакт фактор: 1.737 5-летний Импакт фактор: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684

Выпуски:
Том 30, 2020 Том 29, 2019 Том 28, 2018 Том 27, 2017 Том 26, 2016 Том 25, 2015 Том 24, 2014 Том 23, 2013 Том 22, 2012 Том 21, 2011 Том 20, 2010 Том 19, 2009 Том 18, 2008 Том 17, 2007 Том 16, 2006 Том 15, 2005 Том 14, 2004 Том 13, 2003 Том 12, 2002 Том 11, 2001 Том 10, 2000 Том 9, 1999 Том 8, 1998 Том 7, 1997 Том 6, 1996 Том 5, 1995 Том 4, 1994 Том 3, 1993 Том 2, 1992 Том 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v13.i23.100
23 pages

EFFECT OF SOLID PARTICLE CHARACTERISTICS ON SUSPENSION ATOMIZATION

Basel Mulhem
Chemical Engineering Department, University of Bremen, Bremen, Germany
Gunther Schulte
Chemical Engineering Department, University of Bremen, Bremen, Germany

Краткое описание

Suspensions containing solid particles with different sizes and different bulk liquids have been atomized by means of a twin-fluid atomizer. From drop size analysis in the spray it was found that the solid particle size is the main influence on the drop size distribution. Consequently, the atomization of a suspension can be divided into different regimes as follows:
Atomization of suspensions with large particles, Dv50 > 50 mm. The drop size distribution in this range is bimodal, with two peaks (solid and liquid peaks). At lower values of (Weacro ґ ALR) the liquid diameter peak is controlled by the solid particle size and at higher values of (Weacro ґ ALR) it is controlled by the air stream velocity like the atomization of a pure liquid.
Atomization of suspensions with small particles, Dv50 < 50 mm. The drop size distribution is monomodal. The atomization mechanisms of suspensions containing fine solid particles are very similar to the atomization of the pure suspension liquid.


Articles with similar content:

UNSTEADINESS IN EFFERVESCENT SPRAYS
Atomization and Sprays, Vol.9, 1999, issue 1
John T. K. Luong
ANALYSIS OF SIZE-CLASSIFIED SPRAY STRUCTURE AND ATOMIZATION MECHANISM FOR A GASOLINE DIRECT INJECTOR
Atomization and Sprays, Vol.14, 2004, issue 6
Chang Sik Lee, Chang Hee Lee
CHARACTERIZATION OF THE NEAR-INJECTOR REGION OF COAXIAL JETS
ICLASS 94
Proceedings of the Sixth International Conference on Liquid Atomization and Spray Systems, Vol.0, 1994, issue
P. Gicquel, G. Monote, Francis Roger, D. Le Visage, Jean-Louis Carreau
SPRAY CHARACTERIZATION OF LIQUID/GAS COAXIAL INJECTORS WITH THE CENTER LIQUID SWIRLED
Atomization and Sprays, Vol.3, 1993, issue 4
Donald J. Hautman
THE PREMIXED LAMINAR FLAMES IN THE BORON DUST CLOUDS
International Journal of Energetic Materials and Chemical Propulsion, Vol.2, 1993, issue 1-6
N. D. Ageyev, V. G. Shevchuk, Yuriy L. Shoshin, S. V. Goroshin