Выходит 12 номеров в год
ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684
Indexed in
MODELING ATOMIZATION PROCESSES OF PRESSURE-SWIRL HOLLOW-CONE FUEL SPRAYS
Краткое описание
A sheet spray model is proposed to study the atomization and breakup processes of hollow-cone fuel sprays resulting from pressure-swirl injectors which have potential for use in direct-injection gasoline engines. Atomization is described using a method whereby blobs that represents the liquid sheet outside the injector nozzle are injected with sizes equal to the sheet thickness. Breakup of the blobs and the subsequent drops is modeled using a modified Taylor analogy breakup (TAB) model in which the originally used χ-squared size distribution for the breakup drops is replaced by a Rosin-Rammler distribution for the hollow-cone sprays considered, since the former distribution was found to result in an overestimated population of large drops. The model is implemented in a multidimensional computer code and used to study pressure-swirl atomized sprays. Detailed comparisons of computed and experimentally determined spray characteristics such as spray structures, spray tip penetrations, drop sizes, and their distribution are made, and good levels of agreement are obtained.
-
Takagi M, Moriyoshi Y, Modelling of a hollow-cone spray at different ambient pressures, International Journal of Engine Research, 5, 1, 2004. Crossref
-
Fuchimoto Tetsuya, Yanase Shinichiro, Mizushima Jiro, Senda Jiro, Dynamics of vortex rings in the spray from a swirl injector, Fluid Dynamics Research, 41, 4, 2009. Crossref
-
Moon Yoonwan, Kim Dongjun, Yoon Youngbin, Improved Spray Model for Viscous Annular Sheets in a Swirl Injector, Journal of Propulsion and Power, 26, 2, 2010. Crossref
-
Shim Young-Sam, Choi Gyung-Min, Kim Duck-Jool, Numerical and experimental study on hollow-cone fuel spray of highpressure swirl injector under high ambient pressure condition, Journal of Mechanical Science and Technology, 22, 2, 2008. Crossref
-
Rotondi Rossella, Modeling Mixture Formation in a Gasoline Direct Injection Engine, Journal of Applied Mechanics, 73, 6, 2006. Crossref
-
Shim Y. S., Choi G. M., Kim D. J., Numerical modeling of hollow-cone fuel atomization, vaporization and wall impingement processes under high ambient temperatures, International Journal of Automotive Technology, 9, 3, 2008. Crossref
-
Lazzarin M., Faenza M., Barato F., Bellomo N., Bettella A., Numerical Simulation of Hybrid Rockets Liquid Injection and Comparison with Experiments, Journal of Propulsion and Power, 31, 1, 2015. Crossref
-
Kim Hyungmin, Lee Kihyung, An investigation on the fuel behavior for a PFI type motorcycle engine, Journal of Mechanical Science and Technology, 23, 9, 2009. Crossref
-
Inamura Takao, Tsutagawa Takehito, Cho Seong Jin, Masuya Goro, Numerical simulation on the behavior of a liquid jet into an air flow, Heat Transfer?Asian Research, 30, 6, 2001. Crossref
-
Park Hongbok, Heister Stephen D., Nonlinear simulation of free surfaces and atomization in pressure swirl atomizers, Physics of Fluids, 18, 5, 2006. Crossref
-
Cho Seongho, Park Gujeong, Chung Yunjae, Yoon Youngbin, Bazarov Vladimir G., Surface Instability on Cryogenic Swirl Flow at Sub- to Supercritical Conditions, Journal of Propulsion and Power, 30, 4, 2014. Crossref
-
Marchione T., Allouis C., Amoresano A., Beretta F., Experimental Investigation of a Pressure Swirl Atomizer Spray, Journal of Propulsion and Power, 23, 5, 2007. Crossref
-
KIM Seok-woo, MORIYOSHI Yasuo, Effect of Inhomogeneous Mixture Properties on CI Combustion in a Schnurle-Type Gasoline DI Engine, JSME International Journal Series B, 48, 3, 2005. Crossref
-
Boileau M., Pascaud S., Riber E., Cuenot B., Gicquel L. Y. M., Poinsot T. J., Cazalens M., Investigation of Two-Fluid Methods for Large Eddy Simulation of Spray Combustion in Gas Turbines, Flow, Turbulence and Combustion, 80, 3, 2008. Crossref
-
Fu Qing-Fei, Yang Li-Jun, Qu Yuan-Yuan, Gu Bin, Linear Stability Analysis of a Conical Liquid Sheet, Journal of Propulsion and Power, 26, 5, 2010. Crossref
-
Lysenko D. A., Solomatnikov A. A., Numerical analysis of aerodynamics and hydraulic loss in the GTÉ-150 combustion chamber of gas-turbine power plant with the use of the fluent suite, Journal of Engineering Physics and Thermophysics, 79, 4, 2006. Crossref
-
Liu Xin, Im Kyoung-Su, Wang Yujie, Wang Jin, Tate Mark W., Ercan Alper, Schuette Daniel R., Gruner Sol M., Four dimensional visualization of highly transient fuel sprays by microsecond quantitative x-ray tomography, Applied Physics Letters, 94, 8, 2009. Crossref
-
Assanis Dennis N. , Hong Sang Jin , Nishimura Akihiro , Papageorgakis George , Vanzieleghem Bruno , Studies of Spray Breakup and Mixture Stratification in a Gasoline Direct Injection Engine Using KIVA-3V , Journal of Engineering for Gas Turbines and Power, 122, 3, 2000. Crossref
-
Laryea G.N, No S.Y, Spray angle and breakup length of charge-injected electrostatic pressure-swirl nozzle, Journal of Electrostatics, 60, 1, 2004. Crossref
-
Subramaniam Mark N., Reitz Rolf D., Ruman Mark, Reduction of Emissions and Fuel Consumption in a 2-Stroke Direct Injection Engine with Multidimensional Modeling and an Evolutionary Search Technique, SAE Technical Paper Series, 1, 2003. Crossref
-
Bianchi Giuseppe, Cipollone Roberto, Murgia Stefano, Contaldi Giulio, Development of an internal air cooling sprayed oil injection technique for the energy saving in sliding vane rotary compressors through theoretical and experimental methodologies, International Journal of Refrigeration, 52, 2015. Crossref
-
Yao Shanshan, Zhang Ji, Fang Tiegang, Effect of viscosities on structure and instability of sprays from a swirl atomizer, Experimental Thermal and Fluid Science, 39, 2012. Crossref
-
Allocca L., Bella G., De Vita A., Di Angelo L., Experimental Validation of a GDI Spray Model, SAE Technical Paper Series, 1, 2002. Crossref
-
Zhao Zhiguo, XIE Maozhao, Numerical simulation about interaction between pressure swirl spray and hot porous medium, Energy Conversion and Management, 49, 5, 2008. Crossref
-
Cheng Wen-Long, Zhang Wei-Wei, Shao Shi-Dong, Jiang Li-Jia, Hong Da-Liang, Effects of inclination angle on plug-chip spray cooling in integrated enclosure, Applied Thermal Engineering, 91, 2015. Crossref
-
Ahn Kyubok, Han Yeoung-Min, Choi Hwan-Seok, Effects of Recess Length on Discharge Coefficients of Swirl Coaxial Injectors, Combustion Science and Technology, 184, 3, 2012. Crossref
-
Chryssakis Christos A., Assanis Dennis N., Lee Jee-Kuen, Nishida Keiya, Fuel Spray Simulation of High-Pressure Swirl-Injector for DISI Engines and Comparison with Laser Diagnostic Measurements, SAE Technical Paper Series, 1, 2003. Crossref
-
De Vita A., Allocca L., Experimental Analysis and CFD Simulation of GDI Sprays, SAE Technical Paper Series, 1, 2003. Crossref
-
Wakisaka Tomoyuki, Esumi Takashi, CFD Simulation of Mixture Formation and Combustion Processes in a Direct-Injection Gasoline Engine Using a GTT Code, SAE Technical Paper Series, 1, 2003. Crossref
-
Senecal P.K, Schmidt D.P, Nouar I, Rutland C.J, Reitz R.D, Corradini M.L, Modeling high-speed viscous liquid sheet atomization, International Journal of Multiphase Flow, 25, 6-7, 1999. Crossref
-
Xu Zhen, Xiao Yunhan, Wang Yue, Experimental and theoretical studies on air humidification by a water spray at elevated pressure, Applied Thermal Engineering, 27, 14-15, 2007. Crossref
-
Moriyoshi Yasuo, Takagi Masahide, Hu Xiao, Analysis of Mixture Formation Process with a Swirl-Type Injector, SAE Technical Paper Series, 1, 2000. Crossref
-
Kawajiri Kazuhiko, Yonezawa Takashi, Ohuchi Hirofumi, Sumida Mamoru, Katashiba Hideaki, Study of Interaction Between Spray and Air Motion, and Spray Wall Impingement, SAE Technical Paper Series, 1, 2002. Crossref
-
Diana S., Iorio B., Giglio V., Police G., The Effect of Valve Lift Shape and Timing on Air Motion and Mixture Formation of DISI Engines Adopting Different VVA Actuators, SAE Technical Paper Series, 1, 2001. Crossref
-
Huang Chen, Lipatnikov Andrei, Modelling of Gasoline and Ethanol Hollow-Cone Sprays Using OpenFOAM, SAE Technical Paper Series, 1, 2011. Crossref
-
Cho Hyeonsu, Kim Woo, Numerical Simulation of Diesel Spray Combustion in a Constant Volume Chamber by Eulerian and Lagrangian Conditional Moment Closure Models, SAE Technical Paper Series, 1, 2013. Crossref
-
Stiesch Gunnar, Merker Guenter P., Tan Zhichao, Reitz Rolf D., Modeling the Effect of Split Injections on DISI Engine Performance, SAE Technical Paper Series, 1, 2001. Crossref
-
Huang Cheng, Gejji Rohan M., Anderson William E., Effects of Physical Modeling on Combustion Instability Predictions in a Single-Element Lean Direct Injection Gas Turbine Combustor, 53rd AIAA Aerospace Sciences Meeting, 2015. Crossref
-
Gao Jian, Trujillo Mario F., Deshpande Suraj , Numerical Simulation of Hollow-Cone Sprays Interacting with Uniform Crossflow for Gasoline Direct Injection Engines, SAE International Journal of Engines, 4, 2, 2011. Crossref
-
Liu Hai-Feng, Gong Xin, Li Wei-Feng, Wang Fu-Chen, Yu Zun-Hong, Prediction of droplet size distribution in sprays of prefilming air-blast atomizers, Chemical Engineering Science, 61, 6, 2006. Crossref
-
Gunasekaran E. James, Ganesan V., Simulation of Fuel-Air Interaction in a Four Stroke Four Valve Direct Injected Spark Ignition (DISI) Engine, SAE Technical Paper Series, 1, 2007. Crossref
-
Park Ki Sun, Heister Stephen D., Nonlinear modeling of drop size distributions produced by pressure-swirl atomizers, International Journal of Multiphase Flow, 36, 1, 2010. Crossref
-
Gradinger T.B., Inauen A., Bombach R., Käppeli B., Hubschmid W., Boulouchos K., Liquid-fuel/air premixing in gas turbine combustors: experiment and numerical simulation, Combustion and Flame, 124, 3, 2001. Crossref
-
Badami M., Bevilacqua V., Millo F., Chiodi M., Bargende M., GDI Swirl Injector Spray Simulation:A Combined Phenomenological-CFD Approach, SAE Technical Paper Series, 1, 2004. Crossref
-
Schmidt David P., Nouar Idriss, Senecal P. K., Rutland C. J., Martin J. K., Reitz Rolf D., Hoffman Jeffrey A., Pressure-Swirl Atomization in the Near Field, SAE Technical Paper Series, 1, 1999. Crossref
-
Kawahara Nobuyuki, Tomita Eiji, Kasahara Daisuke, Nakayama Takashi, Sumida Mamoru, Fuel Breakup Near Nozzle Exit of High-Pressure Swirl Injector for Gasoline Direct Injection Engine, SAE Technical Paper Series, 1, 2004. Crossref
-
Gicquel L Y M, Staffelbach G, Cuenot B, Poinsot T, Large eddy simulations of turbulent reacting flows in real burners: the status and challenges, Journal of Physics: Conference Series, 125, 2008. Crossref
-
Zhao F, Lai M.-C, Harrington D.L, Automotive spark-ignited direct-injection gasoline engines, Progress in Energy and Combustion Science, 25, 5, 1999. Crossref
-
Iyer Claudia O., Han Zhiyu, Yi Jianwen, CFD Modeling of a Vortex Induced Stratification Combustion (VISC) System, SAE Technical Paper Series, 1, 2004. Crossref
-
Padding Johan T., Deen Niels G., (Frank) Peters E.A.J.F., (Hans) Kuipers J.A.M., Euler–Lagrange Modeling of the Hydrodynamics of Dense Multiphase Flows, in Mesoscale Modeling in Chemical Engineering Part I, 46, 2015. Crossref
-
Rotondi Rossella, Bella Gino, Gasoline direct injection spray simulation, International Journal of Thermal Sciences, 45, 2, 2006. Crossref
-
Fan Li, Reitz Rolf D., Multi-Dimensional Modeling of Mixing and Combustion of a Two-Stroke Direct-Injection Spark Ignition Engine, SAE Technical Paper Series, 1, 2001. Crossref
-
Inamura Takao, Tamura Hiroshi, Sakamoto Hiroshi, Characteristics of Liquid Film and Spray Injected from Swirl Coaxial Injector, Journal of Propulsion and Power, 19, 4, 2003. Crossref
-
Han Fangwei, Wang Deming, Jiang Jiaxing, Zhu Xiaolong, Modeling the influence of forced ventilation on the dispersion of droplets ejected from roadheader-mounted external sprayer, International Journal of Mining Science and Technology, 24, 1, 2014. Crossref
-
Auriemma M., Diana S., Police G., Valentino G., Pontoppidan M., Experimental and Numerical Study of Spray Generated by a High Pressure Gasoline Swirl Injector, SAE Technical Paper Series, 1, 2002. Crossref
-
Wang Dongyao, Lee Chia-fon F., Zeng Yangbing, Modeling of Air Fuel Mixing in a Stratified Gasoline Direct Injection Engine Using Multicomponent Fuel Representation, SAE Technical Paper Series, 1, 2003. Crossref
-
Abani Neerav, Bakshi Shamit, Ravikrishna R. V., Modelling of Spray and In-cylinder Air Flow Interaction in Direct-Injection Engines, SAE Technical Paper Series, 1, 2001. Crossref
-
Zeng Yangbing, Lee Chia-fon, Modeling of Spray Vaporization and Air-Fuel Mixing in Gasoline Direct-Injection Engines, SAE Technical Paper Series, 1, 2000. Crossref
-
Zhu Shanglong, Roekaerts Dirk, Pozarlik Artur, van der Meer Theo, Eulerian–Lagrangian RANS Model Simulations of the NIST Turbulent Methanol Spray Flame, Combustion Science and Technology, 187, 7, 2015. Crossref
-
Georjon T., Bourguignon E., Duverger T., Delhaye B., Voisard P., Characteristics of Mixture Formation and Combustion in a Spray-Guided Concept Gasoline Direct Injection Engine: An Experimental and Numerical Approach, SAE Technical Paper Series, 1, 2000. Crossref
-
Pawar Sandip, Padding Johan, Deen Niels, Jongsma Alfred, Innings Fredrik, Kuipers J.A.M. (Hans), Numerical and experimental investigation of induced flow and droplet–droplet interactions in a liquid spray, Chemical Engineering Science, 138, 2015. Crossref
-
Bode Mathis, Falkenstein Tobias, Le Chenadec Vincent, Kang Seongwon, Pitsch Heinz, Arima Toshiyuki, Taniguchi Hiroyoshi, A New Euler/Lagrange Approach for Multiphase Simulations of a Multi-Hole GDI Injector, SAE Technical Paper Series, 1, 2015. Crossref
-
Houshiar Ramin, Najafi Cyrus Aghah, Combustion Modelling of Soot and Radiation with Dynamic Mesh in CI Engines, SAE Technical Paper Series, 1, 2006. Crossref
-
Fan L., Parrish S. E., Han Z., Farrell P. V., Reitz Rolf D., Comparison of Computed Spray in a Direct-Injection Spark-Ignited Engine with Planar Images, SAE Technical Paper Series, 1, 1997. Crossref
-
Moriyoshi Yasuo, Kikuchi Kazuhiro, Morikawa Koji, Takimoto Hideharu, Numerical Analysis of Mixture Preparation in a Reverse Uniflow-Type Two-Stroke Gasoline DI Engine, SAE Technical Paper Series, 1, 2001. Crossref
-
Han Zhiyu, Xu Zheng, Wooldridge Steven T., Yi Jianwen, Lavoie George, Modeling of DISI Engine Sprays with Comparison to Experimental In-Cylinder Spray Images, SAE Technical Paper Series, 1, 2001. Crossref
-
Joh Miok, Huh Kang Y., Yoo Joon-Ho, Lai Ming-Chia, Numerical Prediction and Validation of Fuel Spray Behavior in a Gasoline Direct-Injection Engine, SAE Technical Paper Series, 1, 2001. Crossref
-
Moriyoshi Yasuo, Mori Kazuhiro, Morikawa Koji, Takimoto Hideharu, Mixture Formation Analysis of a Schnurle-Type Two-Stroke Gasoline DI Engine, SAE Technical Paper Series, 1, 2001. Crossref
-
Fan L., Li G., Han Z., Reitz Rolf D., Modeling Fuel Preparation and Stratified Combustion in a Gasoline Direct Injection Engine, SAE Technical Paper Series, 1, 1999. Crossref
-
Henriot S., Chaouche A., Chevé E., Duclos J. M., Leduc P., Ménégazzi P., Monnier G., Ranini A., NSDI-3: A Small Bore GDI Engine, SAE Technical Paper Series, 1, 1999. Crossref
-
Huang Cheng, Yoon Changjin, Gejji Rohan M., Anderson William, Sankaran Venke, Computational Study of Combustion Dynamics in a Single-Element Lean Direct Injection Gas Turbine Combustor, 52nd Aerospace Sciences Meeting, 2014. Crossref
-
Inamura Takao, Yanaoka Hideki, Tomoda Terutoshi, Prediction of Mean Droplet Size of Sprays Issued from Wall Impingement Injector, AIAA Journal, 42, 3, 2004. Crossref
-
Xu Kunmei, Cai Guobiao, Zheng Yuntao, Flow field numerical study within thrust chamber of aerospace small liquid propellant rocket engine, 57th International Astronautical Congress, 2006. Crossref
-
Fuel Injection, in Gas Turbine Combustion, 2010. Crossref
-
Han Poong-Gyoo, Seol Jae-Hoon, Hwang Seong-Ha, Yoon Youngbin, The Spray Characteristics of Swirl Coaxial Injectors, 41st Aerospace Sciences Meeting and Exhibit, 2003. Crossref
-
Mastikhin Igor, Arbabi Aidin, Bade Kyle M., Magnetic Resonance Imaging measurements of a water spray upstream and downstream of a spray nozzle exit orifice, Journal of Magnetic Resonance, 266, 2016. Crossref
-
Sim Jaeheon, Badra Jihad, Elwardany Ahmed, Im Hong, Spray Modeling for Outwardly-Opening Hollow-Cone Injector, SAE Technical Paper Series, 1, 2016. Crossref
-
Badra Jihad, Elwardany Ahmed, Sim Jaeheon, Viollet Yoann, Im Hong, Chang Junseok, Effects of In-Cylinder Mixing on Low Octane Gasoline Compression Ignition Combustion, SAE Technical Paper Series, 1, 2016. Crossref
-
Zhang Xinqiao, Shen Chibing, Cheng Peng, Li Qinglian, An image-processing based method for the measurement of the film thickness of a swirl atomizer, Journal of Visualization, 20, 1, 2017. Crossref
-
Inamura Takao, Miyata Kei, Tamura Hiroshi, Sakamoto Hiroshi, Spray characteristics of swirl coaxial injector and its modeling, 37th Joint Propulsion Conference and Exhibit, 2001. Crossref
-
Breda Sebastiano, D'Adamo Alessandro, Fontanesi Stefano, Giovannoni Nicola, Testa Francesco, Irimescu Adrian, Merola Simona, Tornatore Cinzia, Valentino Gerardo, CFD Analysis of Combustion and Knock in an Optically Accessible GDI Engine, SAE International Journal of Engines, 9, 1, 2016. Crossref
-
Manna Lucia, Carotenuto Claudia, Nigro Roberto, Lancia Amedeo, Di Natale Francesco, Primary atomization of electrified water sprays, The Canadian Journal of Chemical Engineering, 95, 9, 2017. Crossref
-
Gao J, Jiang D, Huang Z, Wang X, Experimental and numerical study of high-pressure-swirl injector sprays in a direct injection gasoline engine, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 219, 8, 2005. Crossref
-
Zhu Shanglong, Pozarlik Artur, Roekaerts Dirk, Rodrigues Hugo Correia, van der Meer Theo, Numerical investigation towards HiTAC conditions in laboratory-scale ethanol spray combustion, Fuel, 211, 2018. Crossref
-
Chang D-L, Lee C-f F, Computational studies of air-assisted spray impingement on a flat plate, International Journal of Engine Research, 4, 4, 2003. Crossref
-
Finotello Giulia, Kooiman Roeland F., Padding Johan T., Buist Kay A., Jongsma Alfred, Innings Fredrik, Kuipers J. A. M., The dynamics of milk droplet–droplet collisions, Experiments in Fluids, 59, 1, 2018. Crossref
-
Bode Mathis, Falkenstein Tobias, Davidovic Marco, Pitsch Heinz, Taniguchi Hiroyoshi, Murayama Kei, Arima Toshiyuki, Moon Seoksu, Wang Jin, Arioka Akira, Effects of Cavitation and Hydraulic Flip in 3-Hole GDI Injectors, SAE International Journal of Fuels and Lubricants, 10, 2, 2017. Crossref
-
Montanaro Alessandro, Migliaccio Marianna, Allocca Luigi, Beatrice Carlo, Fraioli Valentina, Ianniello Roberto, Outward-Opening Hollow-Cone Spray Characterization by Experimental and Numerical Approach in Evaporative and Non-Evaporative Conditions, SAE Technical Paper Series, 1, 2017. Crossref
-
Seong Baekhoon, Hwang Sangyeon, Jang Hyung-Seok, Lee Hyungdong, Kim Jihoon, Nguyen Vu Dat, Cho Dae-Hyun, Lin Liwei, Byun Doyoung, A hybrid aerodynamic and electrostatic atomization system for enhanced uniformity of thin film, Journal of Electrostatics, 87, 2017. Crossref
-
Zhang Wei-Wei, Li Yi-Yi, Long Wen-Jun, Cheng Wen-Long, Enhancement mechanism of high alcohol surfactant on spray cooling: Experimental study, International Journal of Heat and Mass Transfer, 126, 2018. Crossref
-
Das Mithun, Chatterjee Souvick, Mukhopadhyay Achintya, Sen Swarnendu, Experimental Investigation of a Hollow Cone Spray Using Laser Diagnostics, Journal of Engineering for Gas Turbines and Power, 136, 7, 2014. Crossref
-
Montanaro Alessandro, Allocca Luigi, Beatrice Carlo, Ianniello Roberto, Outwardly Opening Hollow-Cone Diesel Spray Characterization under Different Ambient Conditions, SAE Technical Paper Series, 1, 2018. Crossref
-
Dobos Aron P., Kirkpatrick Allan T., Quasidimensional Modeling of Diesel Combustion Using Detailed Chemical Kinetics, Journal of Engineering for Gas Turbines and Power, 139, 8, 2017. Crossref
-
Paul Chandan, Ferreyro Fernandez Sebastian, Haworth Daniel C., Roy Somesh, Modest Michael F., A detailed modeling study of radiative heat transfer in a heavy-duty diesel engine, Combustion and Flame, 200, 2019. Crossref
-
Li Xu, Liu Kai, Experimental Study on the Atomization Behavior of Fuel Nozzle of Low Pollution, Applied Mechanics and Materials, 66-68, 2011. Crossref
-
Mikaniki Pouria, Najafi Seyed Mohammad Ali, Ghassemi Hojat, Experimental study of a heavy fuel oil atomization by pressure-swirl injector in the application of entrained flow gasifier, Chinese Journal of Chemical Engineering, 27, 4, 2019. Crossref
-
Xu Rang Shu, Niu Ling, Weng Xin Zhu, Xu Long, Bai Min Li, Investigation of Numerical Simulation in Combustion Chamber Predictability, Advanced Materials Research, 317-319, 2011. Crossref
-
Zhang Tao, Dong Bo, Zhou Xun, Guan Linan, Li Weizhong, Zhou Shengqi, Experimental Study of Spray Characteristics of Kerosene-Ethanol Blends from a Pressure-Swirl Nozzle, International Journal of Aerospace Engineering, 2018, 2018. Crossref
-
Fernandez Sebastian Ferreyro, Paul C., Sircar A., Imren A., Haworth D.C., Roy S., Modest M.F., Soot and spectral radiation modeling for high-pressure turbulent spray flames, Combustion and Flame, 190, 2018. Crossref
-
Xu Rang Shu, Lin Rui, Zhang Suo Gang, Zhou Ting Chu, Bai Min Li, Numerical Simulation of Spray Process of Fuel Nozzle, Advanced Materials Research, 308-310, 2011. Crossref
-
Del Pecchia Marco, Breda Sebastiano, D'Adamo Alessandro, Fontanesi Stefano, Irimescu Adrian, Merola Simona, Development of Chemistry-Based Laminar Flame Speed Correlation for Part-Load SI Conditions and Validation in a GDI Research Engine, SAE International Journal of Engines, 11, 6, 2018. Crossref
-
D’Orrico Fabrizio, Berton Andrea, Sideri Matteo, 3D Simulation Methodology for n-Butanol Combustion in an optical accessible research GDI Engine, Energy Procedia, 126, 2017. Crossref
-
Bafekr Sajed Hadi, Shams Mehrzad, Ebrahimi Reza, Shadaram Abdollah, Numerical Simulation of Pressure-Swirl Spray Dispersion by Using Eulerian-Lagrangian Method, Journal of Dispersion Science and Technology, 32, 1, 2010. Crossref
-
Yu Haiming, Cheng Weimin, Xie Yao, Peng Huitian, Spray dedusting scheme under hybrid ventilation at a fully mechanized excavation face, Environmental Science and Pollution Research, 27, 8, 2020. Crossref
-
Hassani Mohammad Amin, Elkaie Abbas, Shafaee Maziar, Numerical investigation of the full-cone spray structure and characteristics provided by a jet-swirl atomizer, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 233, 15, 2019. Crossref
-
Schänzlin Katharina, Koch Thomas, Tzannis Alexios P., Boulouchos Konstantinos, Characterization of Mixture Formation in a Direct Injected Spark Ignition Engine, SAE Technical Paper Series, 1, 2001. Crossref
-
Koch Thomas, Schänzlin Katharina, Boulouchos Konstantinos, Characterization and Phenomenological Modeling of Mixture Formation and Combustion in a Direct Injection Spark Ignition Engine, SAE Technical Paper Series, 1, 2002. Crossref
-
Stiesch Gunnar, Multidimensional Models of Spray Processes, in Modeling Engine Spray and Combustion Processes, 2003. Crossref
-
Maly M., Sapik M., Cejpek O., Wigley G., Katolicky J., Jedelsky J., Effect of spill orifice geometry on spray and control characteristics of spill-return pressure-swirl atomizers, Experimental Thermal and Fluid Science, 106, 2019. Crossref
-
Badra Jihad A., Sim Jaeheon, Elwardany Ahmed, Jaasim Mohammed, Viollet Yoann, Chang Junseok, Amer Amer, Im Hong G., Numerical Simulations of Hollow-Cone Injection and Gasoline Compression Ignition Combustion With Naphtha Fuels, Journal of Energy Resources Technology, 138, 5, 2016. Crossref
-
Muddapur Anandteerth, Srikrishna Sahu, Sundararajan T, Spray dynamics simulations for pulsatile injection at different ambient pressure and temperature conditions, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 234, 4, 2020. Crossref
-
Lazzarin Marta, Faenza M., Barato Francesco, Bellomo Nicolas, Bettella Alberto, Pavarin Daniele, Grosse Matthias, CFD Simulation of a Hybrid Rocket Motor with Liquid Injection, 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2011. Crossref
-
Liu Kai, Sun Li Yan, Experimental Study of Atomization Characteristic of Air Blast Atomizer, Applied Mechanics and Materials, 300-301, 2013. Crossref
-
Zhao Fu-Quan, Lai Ming-Chia, Harrington David L., A Review of Mixture Preparation and Combustion Control Strategies for Spark-Ignited Direct-Injection Gasoline Engines, SAE Technical Paper Series, 1, 1997. Crossref
-
Breda Sebastiano, D'Adamo Alessandro, Fontanesi Stefano, D'Orrico Fabrizio, Irimescu Adrian, Merola Simona, Giovannoni Nicola, Numerical Simulation of Gasoline and n-Butanol Combustion in an Optically Accessible Research Engine, SAE International Journal of Fuels and Lubricants, 10, 1, 2017. Crossref
-
Ren W. M., Nally J. F., Computations of Hollow-Cone Sprays from a Pressure-Swirl Injector, SAE Technical Paper Series, 1, 1998. Crossref
-
Иванов Борис, Ivanov Boris, Зиганшин Булат, Ziganshin Bulat, Рудаков Александр, Rudakov Aleksandr, Лушнов Максим, Lushnov Maksim, ASSESSMENT OF DISTRIBUTION OF DISINFECTING LIQUID DROPS ON THE SURFACE PROCESSED, Vestnik of Kazan State Agrarian University, 14, 3, 2019. Crossref
-
Roslyakov P. V., Khudyakov I. V., Khokhlov D. A., Zaichenko M. N., Experience Gained with CFD-Modeling of Liquid and Gaseous Fuel Combustion Processes in Power Installations (Review), Thermal Engineering, 66, 9, 2019. Crossref
-
Lee K., Abraham J., Spray Applications in Internal Combustion Engines, in Handbook of Atomization and Sprays, 2011. Crossref
-
Breda S., D'Orrico F., Berni F., d'Adamo A., Fontanesi S., Irimescu A., Merola S.S., Experimental and numerical study on the adoption of split injection strategies to improve air-butanol mixture formation in a DISI optical engine, Fuel, 243, 2019. Crossref
-
Breda Sebastiano, D'Adamo Alessandro, Fontanesi Stefano, Del Pecchia Marco, Merola Simona, Irimescu Adrian, CFD Optimization of n-Butanol Mixture Preparation and Combustion in an Research GDI Engine, SAE Technical Paper Series, 1, 2017. Crossref
-
Giovannoni Nicola, Breda Sebastiano, Paltrinieri Stefano, D'Adamo Alessandro, Fontanesi Stefano, Pulvirenti Francesco, CFD Analysis of the Effects of Fuel Composition and Injection Strategy on Mixture Preparation and Fuel Deposit Formation in a GDI Engine, SAE Technical Paper Series, 1, 2015. Crossref
-
Liu Kai, Research of the Atomization Characteristics of Low Pollution Air Blast Nozzle, Advanced Materials Research, 655-657, 2013. Crossref
-
Abdolkarimi Vahid, Hormozi Faramarz, Jolodar Ali Jebraieli, Computational Fluid Dynamics Modeling of a Fluid Catalytic Cracking Atomizer, JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 43, 4, 2010. Crossref
-
Liu Kai, Numerical Simulation of the Performance of Gas Turbine Combustor, Advanced Materials Research, 655-657, 2013. Crossref
-
Lippert Andreas M., Reitz Rolf D., Modeling of Multicomponent Fuels Using Continuous Distributions with Application to Droplet Evaporation and Sprays, SAE Technical Paper Series, 1, 1997. Crossref
-
Huang Cheng, Gejji Rohan, Anderson William, Yoon Changjin, Sankaran Venkateswaran, Combustion Dynamics in a Single-Element Lean Direct Injection Gas Turbine Combustor, Combustion Science and Technology, 192, 12, 2020. Crossref
-
Xu Li, Experimental Investigation on Atomization Characteristics of a Certain Type of Aero Engine Fuel Nozzle, Advanced Materials Research, 354-355, 2011. Crossref
-
Liu Kai, Zhang Bao Cheng, Ma Hong An, Experimental Study on Atomization Characteristic of Fuel Injector of Heavy-Duty Gas Turbine, Advanced Materials Research, 354-355, 2011. Crossref
-
Chang Dar-Lon, Lee Chia-Fon F., Development of a simplified bubble growth model for flash boiling sprays in direct injection spark ignition engines, Proceedings of the Combustion Institute, 30, 2, 2005. Crossref
-
Mingalev Stanislav, Inozemtsev Alexander, Gomzikov Leonid, Sipatov Alexey, Abramchuk Taras, Simulation of Primary Film Atomization in Prefilming Air-assisted Atomizer Using Volume-of-Fluid Method, Microgravity Science and Technology, 32, 3, 2020. Crossref
-
Levitsky Inna, Tavor Dorith, Improved Atomization via a Mechanical Atomizer with Optimal Geometric Parameters and an Air-Assisted Component, Micromachines, 11, 6, 2020. Crossref
-
Shin Jisoo, Kim Donghwan, Seo Jeawon, Park Sungwook, Effects of the physical properties of fuel on spray characteristics from a gas turbine nozzle, Energy, 205, 2020. Crossref
-
Najafi S.M.A., Mikaniki P., Ghassemi H., Numerical simulation of heavy fuel oil atomization using a pulsed pressure-swirl injector, Chinese Journal of Chemical Engineering, 32, 2021. Crossref
-
OMİDVAR Amir, MAHDAVİ Amirhossein, MEHRYAR Reza, A SIMULATED STUDY ON THE EFFECT OF WATER TEMPERATURE ON COOLING EFFICIENCY OF WATER MIST FIRE EXTINGUISHERS, Journal of Thermal Engineering, 2020. Crossref
-
Lim Youngbok, Choi Munkyoung, Han Kunwoo, Yi Minyoung, Lee Jinwon, Performance Characteristics of CO2Capture Using Aqueous Ammonia in a Single-Nozzle Spray Tower, Industrial & Engineering Chemistry Research, 52, 43, 2013. Crossref
-
Jeong Seokgyu, Yoon Youngbin, Sheet-breakup characteristics of a closed-type swirl injector considering internal flow instability, Acta Astronautica, 186, 2021. Crossref
-
Yoon Changjin, Gejji Rohan, Huang Cheng, Anderson William, Sankaran Venke, Computational Investigation of Combustion Instabilities in a Laboratory-Scale LDI Gas Turbine Engine, 49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, 2013. Crossref
-
Rostami Elyas, Mahdavy Moghaddam Hossein, Experimental comparison of the spray atomization of heavy and light fuel oil at different temperatures and pressures for pressure-swirl injector, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 235, 7, 2021. Crossref
-
Ma Xin, Wang Shuang, Li Fashe, Zhang Huicong, Jiang Shang, Sui Meng, Effect of air flow rate and temperature on the atomization characteristics of biodiesel in internal and external flow fields of the pressure swirl nozzle, Energy, 253, 2022. Crossref
-
Rezaei Shahnaz, Vashahi Foad, Ryu Gyongwon, Lee Jeekeun, On the correlation of the primary breakup length with fuel temperature in pressure swirl nozzle, Fuel, 258, 2019. Crossref
-
Shafaee Mazyar, Elkaie Abbas, Hassani Mohammad Amin, Experimental investigation on fluid structure and full-cone spray characteristics of a jet-swirl atomizer using shadowgraph technique, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 236, 8, 2022. Crossref
-
A. S., Askarova, S. A., Bolegenova, V. Yu., Maximov, M. T. Beketayeva, Stochastic Model of Liquid Fuel Spraying at High Pressures and High Reynolds Numbers, WSEAS TRANSACTIONS ON HEAT AND MASS TRANSFER, 17, 2022. Crossref
-
He Mingli, Zhang Guang, Hu Shaohua, Wang Cheng, Assessment of a Method to Enhance the Momentum of Water Mist: Co-Flow Jet Water Mist System, Fire Technology, 58, 1, 2022. Crossref
-
Qiu Chengxu, Chen Zhe, Zhou Weixing, Martynenko Sergey, Yanovskiy Leonid, Experimental investigation on carbon deposition characteristics of aeroengine swirl nozzle and its effect on spray behaviors, Fuel, 324, 2022. Crossref
-
Peng Huitian, Nie Wen, Zhang Xu, Xu Changwei, Meng Xu, Cheng Weimin, Liu Qiang, Hua Yun, Research on the blowing-spraying synergistic dust removal technology for clean environment in large-scale mechanization coal mine, Fuel, 324, 2022. Crossref
-
Orati Edson, Veríssimo Anton S., Rocha Ana Maura A., Costa Fernando S., Carvalho João A., Experimental investigation of flameless combustion of biodiesel, Energy, 255, 2022. Crossref
-
Wang Jiaxin, Experimental Study Based on Fuel Nozzles Capable of Achieving Wide Fuel Supply, Journal of Physics: Conference Series, 2361, 1, 2022. Crossref