Выходит 12 номеров в год
ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684
Indexed in
FLOW-FIELD INVESTIGATION OF MULTIHOLE SUPERHEATED SPRAYS USING HIGH-SPEED PIV. PART II. AXIAL DIRECTION
Краткое описание
Superheated spray is expected to improve spray atomization and evaporation processes by introducing fuel temperature as a new control parameter in spark-ignited direct-injection engines (Zeng et al., 2012a,b; Zeng et al., 2013). Spray structure transforms dramatically with increase in the fuel superheat degree. Since the structure transformation is most likely caused by the momentum and mass transportation phenomena between the liquid and gas phases involved in the spray, the velocity distributions of both fuel spray and surrounding air under various superheat degrees can be used to interpret the transformation mechanism. The spray velocity field was thoroughly investigated in both cross-sectional and axial directions by using a high-speed particle image velocimetry (PIV) system. The cross-sectional PIV result was summarized in Part I, which explains how the adjacent plumes interact with each other, resulting in various characteristic mass distribution patterns on the cross-sectional plane. This study unveils how individual plumes develop along its axial direction as a function of time and axial location during the transformation process. As the superheat degree increases, the spray structure transforms from individual, narrow jets to a single, solid-cone liquid spray, and finally to a corndog-shape structure with an inner vapor gas jet and outer liquid spray. The PIV results provide insight to the spray transformation processes under various superheated conditions. As the superheat degree increases, the vortex ring developed at the spray outer boundary near the spray tip region becomes stronger in terms of velocity magnitude and tighter in terms of vortex size. The vortex ring diameter keeps decreasing, which pushes the multiple plumes to the central axis. As a result, the plumes collapse into one single spray body with accelerated axial velocity and significantly reduced radial velocity.
-
Zhang Ming, Xu Min, Hung David L S, Simultaneous two-phase flow measurement of spray mixing process by means of high-speed two-color PIV, Measurement Science and Technology, 25, 9, 2014. Crossref
-
Price Christopher, Hamzehloo Arash, Aleiferis Pavlos, Richardson David, Aspects of Numerical Modelling of Flash-Boiling Fuel Sprays, SAE Technical Paper Series, 1, 2015. Crossref
-
Wu Shengqi, Xu Min, Hung David L.S., Li Tianyun, Pan Hujie, Analyzing the Cycle-to-Cycle Variations of Vapor and Liquid Phases of Evaporating SIDI Sprays via Proper Orthogonal Decomposition Technique, SAE International Journal of Engines, 9, 1, 2015. Crossref
-
Wu Shengqi, Xu Min, Hung David L.S., Li Tianyun, Pan Hujie, Near-nozzle spray and spray collapse characteristics of spark-ignition direct-injection fuel injectors under sub-cooled and superheated conditions, Fuel, 183, 2016. Crossref
-
Yang Jie, Dong Xue, Wu Qiang, Xu Min, Influence of flash boiling spray on the combustion characteristics of a spark-ignition direct-injection optical engine under cold start, Combustion and Flame, 188, 2018. Crossref
-
Serras-Pereira Jose, Aleiferis Pavlos G, Richardson Dave, An experimental database on the effects of single- and split injection strategies on spray formation and spark discharge in an optical direct-injection spark-ignition engine fuelled with gasoline, iso-octane and alcohols, International Journal of Engine Research, 16, 7, 2015. Crossref
-
Huang Yuhan, Hong Guang, Zhou John, Numerical Modelling of Ethanol Direct Injection (EDI) Sprays of a Multi-Hole Injector under Non-Evaporating, Transition and Flash-Boiling Conditions, SAE Technical Paper Series, 1, 2017. Crossref
-
Dong Xue, Yang Jie, Hung David L.S., Li Xuesong, Xu Min, Effects of flash boiling injection on in-cylinder spray, mixing and combustion of a spark-ignition direct-injection engine, Proceedings of the Combustion Institute, 37, 4, 2019. Crossref
-
Price Christopher, Hamzehloo Arash, Aleiferis Pavlos, Richardson David, Numerical modelling of fuel spray formation and collapse from multi-hole injectors under flash-boiling conditions, Fuel, 221, 2018. Crossref
-
Xu Hongchang, Liu Shuangzhai, Pan Haoxing, Spray Characteristics with High-Speed Tomographic Particle Image Velocimetry Under Non-Flash and Flash Boiling Conditions, Journal of Shanghai Jiaotong University (Science), 24, 5, 2019. Crossref
-
Lu Jinghe, Liu Xiao, Hu Chuanlong, Li Zhiming, Zheng Hongtao, Li Shuying, Experimental study on flashing spray characteristics of pressure swirl nozzle with ethanol solution, Experimental Thermal and Fluid Science, 112, 2020. Crossref
-
Sinha Avick, Chauhan Rajesh O., Balasubramanian Sridhar, Characterization of a Superheated Water Jet Released Into Water Using Proper Orthogonal Decomposition Method, Journal of Fluids Engineering, 140, 8, 2018. Crossref
-
Yao Bowei, Xu Hongchang, Wang Sen, Yuan Zhiyuan, Li Xuesong, Jin Sun, Effect of Spray Characteristics on the Combustion Process in an Optical Engine, SAE Technical Paper Series, 1, 2020. Crossref
-
Chang Mengzhao, Lee Ziyoung, Park Sungwook, Park Suhan, Characteristics of flash boiling and its effects on spray behavior in gasoline direct injection injectors: A review, Fuel, 271, 2020. Crossref
-
Badawy Tawfik, Xu Hongming, Li Yanfei, Macroscopic spray characteristics of iso-octane, ethanol, gasoline and methanol from a multi-hole injector under flash boiling conditions, Fuel, 307, 2022. Crossref
-
Chang Mengzhao, Hwan Park Jeong, Ik Kim Hyung, Park Suhan, Flash boiling macroscopic spray characteristics of multi-hole direct injection injectors with different hole arrangement, Applied Thermal Engineering, 170, 2020. Crossref