Выходит 12 номеров в год
ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684
Indexed in
DISCHARGE COEFFICIENTS FOR A DIESEL INJECTOR DURING COLD STARTING CONDITIONS
Краткое описание
Most studies of sprays produced from diesel injectors are performed at "usual" ambient temperature. These studies focus on spray development and the impact of flow inside the injector nozzles. Various mechanisms can produce initial perturbations of the jet and depend on nozzle geometrythe cavitation phenomenon through the nozzle hole is one of these. Until recently, only a few studies have examined spray development for cold temperature conditions (i.e., below 273 K). The objective of this study is to provide data regarding the phenomena occurring in a diesel fuel jet above temperature conditions, representative of a cold start for a direct-injection compression ignition engine. In this study, the discharge coefficient has been estimated by performing experiments inside a climatic chamber, from 253 to 293 K, for three different fuels, namely, n-heptane, decane, and arctic diesel fuel.
-
Dernotte J., Hespel C., Foucher F., Houillé S., Mounaïm-Rousselle C., Influence of physical fuel properties on the injection rate in a Diesel injector, Fuel, 96, 2012. Crossref
-
Wang Ziman, Ding Haichun, Wyszynski Miroslaw L., Tian Jianyi, Xu Hongming, Experimental study on diesel fuel injection characteristics under cold start conditions with single and split injection strategies, Fuel Processing Technology, 131, 2015. Crossref
-
Tinprabath P., Hespel C., Chanchaona S., Foucher F., Influence of biodiesel and diesel fuel blends on the injection rate under cold conditions, Fuel, 144, 2015. Crossref
-
Han Dong, Duan Yaozong, Wang Chunhai, Lin He, Huang Zhen, Wooldridge Margaret S., Experimental study of the two-stage injection process of fatty acid esters on a common rail injection system, Fuel, 163, 2016. Crossref
-
Salvador F.J., Gimeno J., Carreres M., Crialesi-Esposito M., Fuel temperature influence on the performance of a last generation common-rail diesel ballistic injector. Part I: Experimental mass flow rate measurements and discussion, Energy Conversion and Management, 114, 2016. Crossref
-
Tinprabath P., Hespel C., Chanchaona S., Foucher F., Impact of cold conditions on diesel injection processes of biodiesel blends, Renewable Energy, 96, 2016. Crossref
-
Payri R, Salvador F J, Gimeno J, García A, Flow regime effects over non-cavitating diesel injection nozzles, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 226, 1, 2012. Crossref
-
Cavicchi Andrea, Postrioti Lucio, Pesce Francesco Concetto, Ferrara Umberto, Experimental Analysis of Fuel and Injector Body Temperature Effect on the Hydraulic Behavior of Latest Generation Common Rail Injection Systems, SAE Technical Paper Series, 1, 2018. Crossref
-
Cao Tianyi, He Zhixia, Si Zhanbo, EL-Seesy Ahmed I., Guan Wei, Zhou Han, Wang Qian, Optical experimental study on cavitation development with different patterns in diesel injector nozzles at different fuel temperatures, Experiments in Fluids, 61, 8, 2020. Crossref
-
Desantes José M., López J. Javier, Carreres Marcos, López-Pintor Darío, Characterization and prediction of the discharge coefficient of non-cavitating diesel injection nozzles, Fuel, 184, 2016. Crossref