Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Atomization and Sprays
Импакт фактор: 1.737 5-летний Импакт фактор: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684

Выпуски:
Том 30, 2020 Том 29, 2019 Том 28, 2018 Том 27, 2017 Том 26, 2016 Том 25, 2015 Том 24, 2014 Том 23, 2013 Том 22, 2012 Том 21, 2011 Том 20, 2010 Том 19, 2009 Том 18, 2008 Том 17, 2007 Том 16, 2006 Том 15, 2005 Том 14, 2004 Том 13, 2003 Том 12, 2002 Том 11, 2001 Том 10, 2000 Том 9, 1999 Том 8, 1998 Том 7, 1997 Том 6, 1996 Том 5, 1995 Том 4, 1994 Том 3, 1993 Том 2, 1992 Том 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v6.i4.10
pages 377-408

DROP SIZE MEASUREMENTS IN HEAVY OIL SPRAYS FROM PRESSURE-SWIRL NOZZLES

Javier Ballester
University of Zaragoza, Fluid Mechanics Group/LITEC
Cesar Dopazo
CIEMAT, Av. Complutense 22 Madrid, 28040 Spain

Краткое описание

The performance of pressure-swirl nozzles atomizing heavy oil is examined using laser diffractometry. Errors due to multiple scattering in dense sprays are avoided by the specific arrangement of the laser-diffraction particle size analyzer adopted in the present work. A parametric study of the influence of injection conditions and nozzle internal dimensions on mean drop size has been conducted, and empirical correlations are proposed. The results display significant differences with respect to previous studies, which are considered to be related to the small dimensions of the atomizers tested (orifice diameters down to 0.45 mm). The relevant role of viscous effects on the flow inside smalt-size nozzles is thought to be the factor responsible for their different behavior.


Articles with similar content:

DISCHARGE COEFFICIENT AND SPRAY ANGLE MEASUREMENTS FOR SMALL PRESSURE-SWIRL NOZZLES
Atomization and Sprays, Vol.4, 1994, issue 3
Cesar Dopazo, Javier Ballester
THE INFLUENCE OF DESIGN PARAMETERS ON THE INITIAL SPRAY CHARACTERISTICS OF THE HIGH-PRESSURE AIR INCLUSION NOZZLE
Atomization and Sprays, Vol.26, 2016, issue 4
Haijun Yan, Kazuhiro Nakano, Shintaroh Ohashi, Geng Bai, Tomomichi Mizukami, Somsak Kramchote
ENGINE COMBUSTION NETWORK (ECN): MEASUREMENTS OF NOZZLE GEOMETRY AND HYDRAULIC BEHAVIOR
Atomization and Sprays, Vol.22, 2012, issue 12
Tim Bazyn, Raul Payri, Alan L. Kastengren, Lyle M. Pickett, Julien Manin, Christopher F. Powell, F. Zak Tilocco
EFFECT OF NOZZLE CONFIGURATION ON THE ATOMIZATION OF A STEADY SPRAY
Atomization and Sprays, Vol.2, 1992, issue 4
Toshio Kurabayashi, Kazuhiro Abe, Siichi Shiga, Masaki Tanaka, Takao Karasawa
EFFERVESCENT ATOMIZATION AT INJECTION PRESSURES IN THE MPa RANGE
Atomization and Sprays, Vol.9, 1999, issue 6
Jay P. Gore, Robert A. Wade, W. A. Eckerle, Jennifer M. Weerts