Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Computational Thermal Sciences: An International Journal
ESCI SJR: 0.249 SNIP: 0.434 CiteScore™: 1.4

ISSN Печать: 1940-2503
ISSN Онлайн: 1940-2554

Computational Thermal Sciences: An International Journal

DOI: 10.1615/ComputThermalScien.2012005125
pages 119-129

GEOMETRIC OPTIMIZATION BASED ON THE CONSTRUCTAL DESIGN OF PERFORATED THIN PLATES SUBJECT TO BUCKLING

Luiz Alberto O. Rocha
Programa de Pos-Graduacao em Engenharia Mecanica, Universidade Federal do Rio Grande do Sul Porto Alegre, Brazil, Rua Sarmento Leite, 425, 90.050-170
M. V. Real
Programa de Pos-Graduacão em Engenharia Oceânica (PPGEO), Escola de Engenharia (EE), Universidade Federal do Rio Grande (FURG), Rio Grande do Sul, Brazil
A. L. G. Correia
Programa de Pos-Graduacão em Engenharia Oceânica (PPGEO), Escola de Engenharia (EE), Universidade Federal do Rio Grande (FURG), Rio Grande do Sul, Brazil
J. Vaz
Programa de Pos-Graduacão em Engenharia Oceânica (PPGEO), Escola de Engenharia (EE), Universidade Federal do Rio Grande (FURG), Rio Grande do Sul, Brazil
E. D. dos Santos
Universidade Federal do Rio Grande (FURG), Escola de Engenharia (EE), Programa de Pos-Graduacao em Engenharia Oceanica (PPGEO), Rio Grande, Rio Grande do Sul, Brazil
L. A. Isoldi
Universidade Federal do Rio Grande (FURG), Escola de Engenharia (EE), Programa de Pos-Graduacao em Engenharia Oceanica (PPGEO), Rio Grande, Rio Grande do Sul, Brazil

Краткое описание

Elastic buckling is an instability phenomenon that can occur if a slender and thin-walled plate is subjected to axial compressive load. It is well known that the presence of holes in structural plate elements is almost inevitable in inspection, maintenance, and service purposes, or to reduce the structural weight. In this paper constructal design was employed to optimize the geometry of thin perforated plates submitted to elastic buckling. Simply supported rectangular perforated plates were analyzed with three different shapes of centered holes: elliptical, rectangular, and diamond. The purpose was to obtain the optimal geometry that maximizes the critical buckling load. The ratio between the height and length of the plate was kept constant, while the ratio between the characteristic dimensions of the holes was optimized for several hole volume fractions (φ). A finite-element model was used to assess the plate buckling load, and the Lanczos method was applied to the solution of the corresponding eigenvalue problem. When φ ≤ 0.20 the optimum geometry is the diamond hole, reaching maximum buckling loads around 80.0,21.5, and 17.4% higher than a plate without perforation and plates with elliptical and rectangular holes, respectively. For intermediate and higher values of φ, the elliptical and rectangular holes, respectively, led to the best performance. The optimal shapes were obtained according to the constructal principle of minimization of distribution of imperfections, showing that the constructal design also can be employed to define the optimized geometries in the mechanics of material problems.


Articles with similar content:

POSTBUCKLING OF NANOCOMPOSITE PLATE REINFORCED WITH RANDOMLY ORIENTED AND DISPERSED CNTS MODELED THROUGH RSA TECHNIQUE
International Journal for Multiscale Computational Engineering, Vol.14, 2016, issue 6
Ashish Srivastava, Dinesh Kumar
SIZE-DEPENDENT POSTBUCKLING OF ANNULAR NANOPLATES WITH DIFFERENT BOUNDARY CONDITIONS SUBJECTED TO THE AXISYMMETRIC RADIAL LOADING INCORPORATING SURFACE STRESS EFFECTS
International Journal for Multiscale Computational Engineering, Vol.14, 2016, issue 1
M. Faghih Shojaei, R. Ansari, V. Mohammadi, Raheb Gholami
ASYMMETRIC NONLINEAR BENDING ANALYSIS OF POLYMERIC COMPOSITE ANNULAR PLATES REINFORCED WITH GRAPHENE NANOPLATELETS
International Journal for Multiscale Computational Engineering, Vol.17, 2019, issue 1
Reza Ansari, Raheb Gholami
Measuring Thermal Conductivity Enhancement of Polymer Composites: Application to Embedded Electronics Thermal Design
Journal of Enhanced Heat Transfer, Vol.8, 2001, issue 2
Cristina H. Amon, Eric Egan
Back-Side Wear in HexLoc Cups Clinico-Radiological, Immunohistopathological, Finite Element, and Retrieval Analysis Studies
Journal of Long-Term Effects of Medical Implants, Vol.24, 2014, issue 4
Arto Koistinen, Hiroyuki Kawaji, Kaj Tallroth, Antti Soininen, Pekka Ylinen, Reijo Lappalainen, Enrique Gomez Barrena, Yrjo T. Konttinen, Martina Lohman, Rami Korhonen