Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
International Journal for Multiscale Computational Engineering
Импакт фактор: 1.016 5-летний Импакт фактор: 1.194 SJR: 0.554 SNIP: 0.68 CiteScore™: 1.18

ISSN Печать: 1543-1649
ISSN Онлайн: 1940-4352

Выпуски:
Том 17, 2019 Том 16, 2018 Том 15, 2017 Том 14, 2016 Том 13, 2015 Том 12, 2014 Том 11, 2013 Том 10, 2012 Том 9, 2011 Том 8, 2010 Том 7, 2009 Том 6, 2008 Том 5, 2007 Том 4, 2006 Том 3, 2005 Том 2, 2004 Том 1, 2003

International Journal for Multiscale Computational Engineering

DOI: 10.1615/IntJMultCompEng.2017020554
pages 413-430

ANALYSIS OF PREDICTIVE CAPABILITIES OF MULTISCALE PHASE TRANSFORMATION MODELS BASED ON THE NUMERICAL SOLUTION OF HEAT TRANSFER AND DIFFUSION EQUATIONS

Monika Pernach
AGH University of Science and Technology, al. Mickiewicza 30, 30-059 Krakow, Poland
Krzysztof Bzowski
AGH University of Science and Technology, al. Mickiewicza 30, 30-059 Kraków, Poland
Lukasz Rauch
Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, al. Mickiewicza 30, 30-059 Kraków, Poland
http://www.isim.agh.edu.pl
Maciej Pietrzyk
Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, al. Mickiewicza 30, 30-059 Kraków, Poland

Краткое описание

The high quality of steel products used in the transport industry is strongly dependent on the parameters of microstructure created during the thermomechanical treatment. Numerical models of phase transformations based on the solution of diffusion equations presented in this work allow one to determine the correlation between parameters of the technological process, changes of microstructure, and product properties. Consequently, these models can be a useful support of the technology design for manufacturing processes. On the other hand, diffusion-based multiscale models are computationally very expensive. Therefore, two simple single-point models, the Johnson-Mehl-Avrami-Kolmogorov (JMAK) equation and an upgrade of the Leblond model, were used as an alternative for fast calculations. Two industrial processes were selected for testing and validation of the developed multiscale models. The first was manufacturing of dual-phase steel strips and the second was manufacturing of pearlitic steel rails. A finite-element (FE) model was used to simulate temperature changes in the macro scale. Single-point models were solved in each Gauss point of the FE mesh. These models were used to analyze a large number of technological variants and to select those giving the required phase composition in products. The developed diffusion-based models were solved in selected points of the product only. In the micro scale these models simulated the austenite decomposition into ferrite, bainite, martensite, and pearlite. The FE method was used to solve the diffusion equation in austenite grains. The initial and boundary conditions for the diffusion model were determined for local thermodynamic equilibrium using ThermoCalc software. Diffusion-based models were used to simulate the best technological variants selected by the single-point models and to predict advanced parameters of the microstructure (morphology, carbon distribution, distribution of properties). All models were compared with respect to their predictive capabilities and computation times.


Articles with similar content:

NUMERICAL MODELING OF PHASE TRANSFORMATION IN DUAL PHASE (DP) STEEL AFTER HOT ROLLING AND LAMINAR COOLING
International Journal for Multiscale Computational Engineering, Vol.12, 2014, issue 5
Krzysztof Bzowski, Maciej Pietrzyk, Monika Pernach
CALCULATION OF THE INTERGRANULAR ENERGY IN TWO-LEVEL PHYSICAL MODELS FOR DESCRIBING THERMOMECHANICAL PROCESSING OF POLYCRYSTALS WITH ACCOUNT FOR DISCONTINUOUS DYNAMIC RECRYSTALLIZATION
Nanoscience and Technology: An International Journal, Vol.7, 2016, issue 2
Peter V. Trusov, Nikita S. Kondratev
MODELING THE HEALING OF MICROCRACKS IN METAL STIMULATED BY A PULSED HIGH-ENERGY ELECTROMAGNETIC FIELD. PART I
Nanoscience and Technology: An International Journal, Vol.6, 2015, issue 3
Konstantin V. Kukudzhanov , Alexander L. Levitin
Internal Variable and Cellular Automata-Finite Element Models of Heat Treatment
International Journal for Multiscale Computational Engineering, Vol.8, 2010, issue 3
Piotr Macioł, Maciej Pietrzyk, Jerzy Gawad, Roman Kuziak
PREDICTION OF DISTRIBUTION OF MICROSTRUCTURAL PARAMETERS INMETALLIC MATERIALS DESCRIBED BY DIFFERENTIAL EQUATIONS WITH RECRYSTALLIZATION TERM
International Journal for Multiscale Computational Engineering, Vol.17, 2019, issue 3
Jan Kusiak, Maciej Pietrzyk, Danuta Szeliga, Piotr Oprocha, Paweł Przybyłowicz, Lukasz Rauch, Natalia Czyzewska, Paweł Morkisz