Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
International Journal for Multiscale Computational Engineering
Импакт фактор: 1.016 5-летний Импакт фактор: 1.194 SJR: 0.554 SNIP: 0.68 CiteScore™: 1.18

ISSN Печать: 1543-1649
ISSN Онлайн: 1940-4352

Выпуски:
Том 17, 2019 Том 16, 2018 Том 15, 2017 Том 14, 2016 Том 13, 2015 Том 12, 2014 Том 11, 2013 Том 10, 2012 Том 9, 2011 Том 8, 2010 Том 7, 2009 Том 6, 2008 Том 5, 2007 Том 4, 2006 Том 3, 2005 Том 2, 2004 Том 1, 2003

International Journal for Multiscale Computational Engineering

DOI: 10.1615/IntJMultCompEng.v7.i3.60
pages 227-236

Investigation of the Size Effect of Nickel-Base Superalloy Single Crystals Based on Strain Gradient Crystal Plasticity

J. F. Nie
Failure Mechanics Laboratory, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China
Z. L. Liu
Failure Mechanics Laboratory, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China
X. M. Liu
Failure Mechanics Laboratory, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China
X. C. You
Failure Mechanics Laboratory, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China
Zhuo Zhuang
Failure Mechanics Laboratory, Department of Engineering Mechanics, Tsinghua University, Beijing 100084

Краткое описание

Nickel-base superalloys consist of two phases, named the phase of the nickel matrix and the ' phase of precipitates, which are dispersed uniformly in the matrix. The ' precipitates have strong effects on the mechanical properties of the alloys. In this article, the mechanism-based strain gradient crystal plasticity theory based on thermal activated theory has been developed. This theory is implemented into ABAQUS as an interface of user material (UMAT) to investigate the additional strengthening mechanism associated with the deformation gradients of the single crystal with dispersed inclusions. Four different precipitate sizes with the same volume fraction are studied using a unit-cell model of alloys. The results show a significant size effect of precipitates on nickel-base superalloys.


Articles with similar content:

NUMERICAL CHARACTERIZATION OF ACRYLIC POLYMER UNDER QUASI-STATIC AND DYNAMIC LOADING BY IMPLEMENTING VISCOELASTIC MATERIAL MODEL
Composites: Mechanics, Computations, Applications: An International Journal, Vol.5, 2014, issue 3
Uzair Ahmed Dar
Modeling the Particle Size and Interfacial Hardening Effects in Metal Matrix Composites with Dispersed Particles at Decreasing Microstructural Length Scales
International Journal for Multiscale Computational Engineering, Vol.7, 2009, issue 4
Rashid K. Abu Al-Rub
INTERPHASE AND AGGREGATION: TWO EFFECTIVE PARAMETERS ON MECHANICAL BEHAVIOR OF POLYMER NANOCOMPOSITES
International Journal for Multiscale Computational Engineering, Vol.12, 2014, issue 2
V. P. W. Shim, Habib Pouriayevali, Saeid Arabnejad, Gin Sun Lim, Davy W. C. Cheong
NONLINEAR BEHAVIOR OF MASONRY WALLS: FE, DE, AND FE/DE MODELS
Composites: Mechanics, Computations, Applications: An International Journal, Vol.10, 2019, issue 3
Daniele Baraldi, Emilio Meroi, Antonella Cecchi, Emanuele Reccia, Claudia Brito de Carvalho Bello
Microstructure-Based Multiscale Constitutive Modeling of γ — γ′ Nickel-Base Superalloys
International Journal for Multiscale Computational Engineering, Vol.4, 2006, issue 5-6
David L. McDowell, A.-J. Wang, M. M. Shenoy, R. S. Kumar