Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Multiphase Science and Technology
SJR: 0.124 SNIP: 0.222 CiteScore™: 0.26

ISSN Печать: 0276-1459
ISSN Онлайн: 1943-6181

Выпуски:
Том 31, 2019 Том 30, 2018 Том 29, 2017 Том 28, 2016 Том 27, 2015 Том 26, 2014 Том 25, 2013 Том 24, 2012 Том 23, 2011 Том 22, 2010 Том 21, 2009 Том 20, 2008 Том 19, 2007 Том 18, 2006 Том 17, 2005 Том 16, 2004 Том 15, 2003 Том 14, 2002 Том 13, 2001 Том 12, 2000 Том 11, 1999 Том 10, 1998 Том 9, 1997 Том 8, 1994 Том 7, 1993 Том 6, 1992 Том 5, 1990 Том 4, 1989 Том 3, 1987 Том 2, 1986 Том 1, 1982

Multiphase Science and Technology

DOI: 10.1615/MultScienTechn.v14.i3.20
40 pages

SYSTEMATIC TESTING OF THE TWO-PHASE PRESSURE-DROP EQUATIONS FOR HORIZONTAL DIVIDING T-JUNCTIONS

M. L.-J. Levac
Department of Mechanical and Industrial Engineering, University of Manitoba, Winnipeg, Manitoba, Canada
Hassan M. Soliman
Department of Mechanical and Industrial Engineering, University of Manitoba, Winnipeg, Manitoba, Canada
Barry J. Azzopardi
Department of Chemical, Environmental and Mining Engineering, The University of Nottingham, University Park, Nottingham NG7 2RD, England
G. E. Sims
Department of Mechanical and Industrial Engineering, University of Manitoba, Winnipeg, Manitoba, Canada

Краткое описание

A study was conducted in order to assess the state of the art in predicting the pressure changes during two-phase flow in horizontal dividing T-junctions. A database was established from data generated at various research laboratories. This database included results for air-water and steam-water mixtures, pressures from near atmospheric to 10 MPa (100 bar), equal-sided and reduced junctions, wide ranges of the inlet gas and liquid superficial velocities, and the full spectrum of inlet flow regimes. Seven empirical models were considered in the present study; all of which include equations for predicting the pressure changes at the junction. It is demonstrated that none of these models is capable of good prediction over the whole range covered by the database. Some models produced good predictions for the data sets from which these models were developed, but large deviations against other data sets. Finally, the database was divided into segments according to the inlet flow regime and it is shown that, in most instances, it is possible to recommend specific models for predicting the pressure changes associated with each regime with good accuracy.


Articles with similar content:

STATISTICAL METHODS FOR MEASUREMENT AND ANALYSIS IN TWO-PHASE PLOW
International Heat Transfer Conference 5, Vol.6, 1974, issue
Novak Zuber, Owen C. Jones Jr.
TWO-PHASE FLOW PRESSURE DROPS ACROSS SUDDEN AREA CONTRACTIONS PRESSURE AND VOID FRACTION PROFILES
International Heat Transfer Conference 8, Vol.5, 1986, issue
Giorgio Sotgia, G. Guglielmini, A. Lorenzi, Adriano Muzzio
TRANSITIONAL FLOW REGIME NOMENCLATURE FOR SMOOTH HORIZONTAL TUBES HEATED AT A CONSTANT HEAT FLUX
International Heat Transfer Conference 16, Vol.9, 2018, issue
Josua Petrus Meyer, Marilize Everts
A MODIFIED CHISHOLM'S INTERACTION FACTOR FOR AIR-WATER TWO-PHASE FLOW THROUGH A HORIZONTAL PIPE
Multiphase Science and Technology, Vol.25, 2013, issue 1
Mahesh J. Vaze, Jyotirmay Banerjee
Two-Phase Pressure Drop for Condensation inside a Horizontal Tube
ICHMT DIGITAL LIBRARY ONLINE, Vol.19, 1981, issue
R. G. Sardesai, David Butterworth, R. G. Owen