Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
SJR: 0.137 SNIP: 0.341 CiteScore™: 0.43

ISSN Печать: 1093-3611
ISSN Онлайн: 1940-4360

Выпуски:
Том 23, 2019 Том 22, 2018 Том 21, 2017 Том 20, 2016 Том 19, 2015 Том 18, 2014 Том 17, 2013 Том 16, 2012 Том 15, 2011 Том 14, 2010 Том 13, 2009 Том 12, 2008 Том 11, 2007 Том 10, 2006 Том 9, 2005 Том 8, 2004 Том 7, 2003 Том 6, 2002 Том 5, 2001 Том 4, 2000 Том 3, 1999 Том 2, 1998 Том 1, 1997

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.2015013899
pages 195-203

SEM INVESTIGATION OF CHITOSAN NANOFIBERS PRODUCED BY NANOSPIDER TECHNOLOGY

N. Prokopchuk
Belarusian State University of Technology, 13a Sverdlova Str., 220050 Minsk, 220050, Republic of Belarus
V. G. Luhin
Belarusian State Technological University, 13a Sverdlov Str., Minsk, 220006, Belarus
K. Vishnevskii
Department of Electrical Devices and High Voltage Technology, Lublin University of Technology, 38a Nadbystrzycka Str., Lublin, Poland
Zh. Shashok
Power Engineering Research Center Ltd., 9 Lotnikow Str., 41-949 Piekary Slqskie, Poland
Pawel Zukowski
Department of Electrical Devices and High Voltage Technology, Lublin University of Technology, ul. Nadbystrzycka 38D, Lublin, 20–618, Poland
J. Plowucha
Power Engineering Research Center Ltd., 9 Lotnikow Str., 41-949 Piekary Slqskie, Poland

Краткое описание

Nanofibers from chitosan were obtained by the NANOSPIDER technology. The structure of the nanofiber layer was analyzed by the method of scanning microscopy on a JSM-5610 LV JEOL. It is found that the most reasonable concentration of chitosan (in the test interval) is 2.0 wt.%. In this case, the process is stable, and nanofibers are formed with a diameter of up to 250 nm. Based on these results, the optimum technological parameters of the electrospinning used for manufacturing high-quality uniform nanofiber coating have been determined. However, the use of different types of chitosan, as well as substrates of differing nature and structure, may require adjustment of these parameters.

Ключевые слова: SEM, nanofibres, chitosan

Articles with similar content:

TRIBO-MECHANICAL PERFORMANCE OF SILICON CARBIDE-REINFORCED AA6061 METAL MATRIX COMPOSITES USING THE TAGUCHI METHODOLOGY
Composites: Mechanics, Computations, Applications: An International Journal, Vol.8, 2017, issue 1
Arun Kumar Rout, Manoj Kumar, Banabihari Nayak
EFFECT OF HOLE-NOTCH ON THE TENSILE AND COMPRESSIVE BEHAVIOR OF CARBON−EPOXY COMPOSITE LAMINATES
Composites: Mechanics, Computations, Applications: An International Journal, Vol.5, 2014, issue 4
Mohsin Ali, Muhammad-Umar Saeed, Zhao Feng Chen, Zhao Hai Chen, Bin Bin Li
EFFECT OF THICKNESS ON THE PROPERTIES OF SPUTTERED Ti THIN FILMS ON AA1100 FOR MEMS APPLICATION
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.20, 2016, issue 1
M. Ramu, S. Venkatesan
THE PLASMA SPRAY FORMING OF NEAR-NET-SHAPE COMPONENT
Progress in Plasma Processing of Materials, 1997, Vol.1, 1997, issue
G. Kim, T. Brzezinski, Peter G. Tsantrizos, S. Grenier, A. Cavasin, M. Smagorinski
SYNTHESIS OF NANO-SIZED RDX USING AN ULTRA-HIGH-PRESSURE RESS SYSTEM
International Journal of Energetic Materials and Chemical Propulsion, Vol.7, 2008, issue 1
Jonathan T. Essel, Peter J. Ferrara, Timothy M. Wawiernia, Andrew C. Cortopassi