Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
ESCI SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN Печать: 1093-3611
ISSN Онлайн: 1940-4360

Выпуски:
Том 24, 2020 Том 23, 2019 Том 22, 2018 Том 21, 2017 Том 20, 2016 Том 19, 2015 Том 18, 2014 Том 17, 2013 Том 16, 2012 Том 15, 2011 Том 14, 2010 Том 13, 2009 Том 12, 2008 Том 11, 2007 Том 10, 2006 Том 9, 2005 Том 8, 2004 Том 7, 2003 Том 6, 2002 Том 5, 2001 Том 4, 2000 Том 3, 1999 Том 2, 1998 Том 1, 1997

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.v6.i4.60
22 pages

CHOICE OF AN IR PYROMETER TO MEASURE THE SURFACE TEMPERATURE OF A COATING DURING ITS FORMATION IN AIR PLASMA SPRAYING

Michel Vardelle
LMCTS-URA 320, University of Limoges, 123 Avenue Albert Thomas -87060 Limoges Cedex - France
Thierry Renault
Laboratory Sciences of Ceramic and Surface Treatment Processes (SPCTS UMR-CNRS 6638) - 123, avenue Albert Thomas 87060 Limoges Cedex - France; Thermadyne Inc. 82 Benning Street, West Lebanon, NH 03784, USA
Pierre Fauchais
Laboratoire Sciences des Procedes Ceramiques et de Traitements de Surface UMR CNRS 6638 University of Limoges 123 avenue Albert Thomas, 87060 LIMOGES - France

Краткое описание

To obtain reproducible and reliable plasma sprayed coatings, it is mandatory to achieve an on-line control of a few well chosen parameters. Among them the substrate and coating surface temperature time evolution, is a key parameter. To measure it, IR pyrometers are used. The aim of this paper is to determine in which wavelength range the pyrometric measurement will not be disturbed by the direct or reflected radiation of the plasma jet, the radiation of hot particles in flight and at last the absorption by the CO2 or H2O contained in the surrounding atmosphere. Measurements and calculations performed in the 2 to 14 mm wavelength range, have shown that in the 8 - 14 mm range, the thermal radiation emitted by the in-flight particles and the plasma jet and its plume are negligible as well as the absorption by the surrounding atmosphere. Measurements close to the sprayed spot, have been performed continuously during spraying and have demonstrated the feasibility and the interest of such a pyrometer.


Articles with similar content:

Influence of I.R. radiation on target pyrometric measurement under plasma spraying conditions
Progress in Plasma Processing of Materials, 2001, Vol.0, 2001, issue
Michel Vardelle, Thierry Renault, Pierre Fauchais, Cedric Bossoutrot
OPTICAL DIAGNOSTICS TO CONTROL ON LINE MELTING OF SILICON MATERIAL TREATED BY THERMAL PLASMA PROCESS. NEW IMPROVEMENTS FACED WITH SEVERE CONDITIONS.
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.9, 2005, issue 1
Jacques Amouroux, Amaury Poidatz, Sergey V. Dresvin, S. Darwiche, Daniel Morvan, E. Francke, M. Benmansour
TITANIUM PLASMA UNDER LASER WELDING CONDITIONS
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.6, 2002, issue 4
Z. Szymanski, J. Hoffman
SPATIALLY DISTRIBUTED MICROWAVE HEATING FOR ADVANCED MATERIALS PROCESSING
International Heat Transfer Conference 13, Vol.0, 2006, issue
Mohammed A Omar, Hui Zhao, Dusan P. Sekulic, Abraham J. Salazar
TIME RESOLVED LASER INDUCED BREAKDOWN SPECTROSCOPY FOR FLUORINE, CHLORINE AND SULFUR DETECTION USING AN OPTICAL FIBER PROBE
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.4, 2000, issue 1
Jacques Amouroux, P. Adam, L. Dudragne, H. Lancelin