Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN Печать: 1093-3611
ISSN Онлайн: 1940-4360

Выпуски:
Том 24, 2020 Том 23, 2019 Том 22, 2018 Том 21, 2017 Том 20, 2016 Том 19, 2015 Том 18, 2014 Том 17, 2013 Том 16, 2012 Том 15, 2011 Том 14, 2010 Том 13, 2009 Том 12, 2008 Том 11, 2007 Том 10, 2006 Том 9, 2005 Том 8, 2004 Том 7, 2003 Том 6, 2002 Том 5, 2001 Том 4, 2000 Том 3, 1999 Том 2, 1998 Том 1, 1997

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.v8.i2.90
pages 245-252

ALUMINA-COATED STEEL: ROLE OF A MAGNETITE INTERPHASE ON THE ADHESION OF THE COATINGHT

S. Valette
SPCTS - Science des precedes Ceramique et de Traitements de Surface - UMR CNRS 6638 - University of Limoges -123 Avenue Albert Thomas - 87060 Limoges Cedex - France
Alain Denoirjean
Equipe Plasma Laser Matériaux, ESA CNRS 6015, 87060 Limoges Cedex, France
R. Danoix
Laboratoire d'Analyse Spectroscopique et de Traitement de Surface des Materiaux - University of Rouen - Institut des Materiaux de Rouen; France
B. Lefez
Laboratoire d'Analyse Spectroscopique et de Traitement de Surface des Materiaux - University of Rouen - Institut des Materiaux de Rouen; France
B. Hannoyer
Université de Rouen, LASTSM, IUT, 76821 Mont Saint Aignan Cedex, France
Pierre Lefort
Laboratoire Science des Precedes Ceramiques et Traitements de Surface UMR CNRS 6638 123 Avenue Albert-Thomas F-87060 Limoges Cedex, France
Pierre Fauchais
Laboratoire Sciences des Procedes Ceramiques et de Traitements de Surface UMR CNRS 6638 University of Limoges 123 avenue Albert Thomas, 87060 LIMOGES - France

Краткое описание

To improve the adhesion of alumina coatings on low carbon steel, it is necessary to develop an oxide layer with a controlled thickness and chemistry at its surface. The best results were obtained with a wustite layer. The Wustite layer (Fe1-xO) is developed on a smooth low carbon iron substrate by its oxidation within a furnace under a pure CO2 atmosphere. However, before spraying, a preheating of the substrate and thus of its oxide surface by the plasma is mandatory in order to eliminate condensates and adsorbates. This step of the process induces more or less the transformation of wustite into magnetite (Fe3O4).
The purpose of this paper is the study of the influence of the magnetite phase and of the thickness of the oxide layer on the adhesion of Al2O3 coatings. The results show that the control of the oxide layer thickness is very important for a good adhesion which is probably linked to the cohesion of the layer. Below a critical thickness of the oxide layer the rapture of the coating is adhesive (at the interface alumina-iron oxide). Over it is a cohesive rupture inside the oxide layer. The composition of the oxide plays a role that is not still completely clarified, but the physico-chemical continuity of the phases present in the interfacial zone seems to be a crucial point.


Articles with similar content:

INFLUENCE OF DC PLASMA PREHEATING ON OXIDE LAYERS FORMED BY FURNACE HEATING ON LOW CARBON STEEL SUBSTRATES AND RESULTING ADHESION/COHESION OF ALUMINA COATINGS
Progress in Plasma Processing of Materials, 2003, Vol.0, 2003, issue
Pierre Lefort, S. Valette, Alain Denoirjean, Pierre Fauchais
AN/AD/Mg IGNITION BY CO2 LASER RADIATION
International Journal of Energetic Materials and Chemical Propulsion, Vol.5, 2002, issue 1-6
V. Tadi, S. Peila, B. N. Kondrikov
INFLUENCE OF PREHEATING PARAMETERS ON THE PLASMA-JET OXIDATION OF A LOW-CARBON STEEL
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.15, 2011, issue 1
B. Hannoyer, J. Pech, Alain Denoirjean, O. Lagnoux, Pierre Fauchais
INFLUENCE OF PREHEATING PARAMETERS ON THE PLASMA-JET OXIDATION OF A LOW-CARBON STEEL
Progress in Plasma Processing of Materials, 1999, Vol.1, 1999, issue
B. Hannoyer, J. Pech, Alain Denoirjean, O. Lagnoux, Pierre Fauchais
EXPERIMENTAL INVESTIGATION OF SURFACE HARDNESS AND DRY SLIDING WEAR BEHAVIOR OF AA7050/B4Cp
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.19, 2015, issue 3-4
P. K. Giridharan, Ranjith Rajamanickam