High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
Выходит 4 номеров в год
ISSN Печать: 1093-3611
ISSN Онлайн: 1940-4360
IF:
0.4
Immediacy Index:
0.1
Eigenfactor:
0.00005
JCI:
0.07
SJR:
0.198
SNIP:
0.48
CiteScore™::
1.1
H-Index:
20
Indexed in
A THEORETICAL EVOLUTION ANALYSIS OF THE DIFFERENT ANODE AND CATHODE ELECTRIC ARC MATERIALS
Том 10,
Выпуск 1, 2006,
pp. 1-24
DOI: 10.1615/HighTempMatProc.v10.i1.10
Краткое описание
An analysis of the thermo physical phenomenon about a constant thermal flux density electrode is realised at the electric arc anode and cathode. The obtain results concern flux ranging between 5.108Wm−2 and 1.1010 Wm−2 at the anode and between 1.1011 Wm−2 and 5.1012 Wm−2 at the cathode, one can see that the surface evolution of anode and cathode spots depends of the nature of the electrode material and particularly of the incident thermal flux value.
413 Просмотры статей
16 Загрузка статей
Метрики
Статьи с похожим содержанием:
Последний выпуск
DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE
RHEOLOGICAL BEHAVIOR AND 3D PRINTING OF HIGHLY FILLED ALUMINA-POLYAMIDE FILAMENTS DURING FUSED DEPOSITION MODELING
SCRATCH TESTING OF ZrN COATING ON TI-6AL-4V TITANIUM ALLOY SURFACE PRELIMINARY TREATED BY COMPRESSION PLASMA FLOWS IMPACT
ELECTRON-BEAM SINTERING OF ZIRCONIUM DIOXIDE/TITANIUM CERAMICS FOR MICROELECTRONICS PRODUCTS
THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET
PREPARATION AND THERMOELECTRIC PROPERTIES OF p-TYPE Ag(1-x)Cu(1+x)Te SAMPLES BY SPARK PLASMA SINTERING METHOD
Статьи, принятые к публикации
THE QUALITY OF THIN-WALLED STRUCTURES OF AlSi10Mg PRODUCED BY SELECTIVE LASER MELTING
PHYSICAL AND MECHANICAL PROPERTIES AND OPERATIONAL CHARACTERISTICS OF CORONA SPRAYED POWDER COATINGS
Increasing the wear resistance of titanium alloys by deposition of a modifying coating (Zr,Nb)N
Electron-beam synthesis of zirconia ceramic coatings in the forevacuum pressure range
Preparation and Thermoelectric Properties of P-type Ag(1-x)Cu(1+x)Te Samples by SPS Method
The effect of the fluorine concentration in a plasma-forming gas mixture on the chemical composition, surface charge and relief parameters of fluorocarbon coatings on PET
Electron beam sintering of zirconium dioxide/titanium ceramics for microelectronics products