High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
Выходит 4 номеров в год
ISSN Печать: 1093-3611
ISSN Онлайн: 1940-4360
IF:
0.4
Immediacy Index:
0.1
Eigenfactor:
0.00005
JCI:
0.07
SJR:
0.198
SNIP:
0.48
CiteScore™::
1.1
H-Index:
20
Indexed in
Том 11, 2007 Выпуск 2
DOI: 10.1615/HighTempMatProc.v11.i2
INFLUENCE OF VOLTAGE FLUCTUATIONS RELATED TO PLASMA TORCH WORKING CONDITIONS ON ZIRCONIA PARTICLE THERMAL TREATMENT
pp. 161-174
DOI: 10.1615/HighTempMatProc.v11.i2.10
OSCILLATIONS IN DC PLASMA JET AT REDUCED PRESSURES
pp. 175-180
DOI: 10.1615/HighTempMatProc.v11.i2.20
INTERACTION OF HOT GAS MIXTURE FREE JET WITH SURROUNDING AIR
pp. 181-190
DOI: 10.1615/HighTempMatProc.v11.i2.30
HEAT TRANSFER AND NON-EQUILIBRIUM PHASE CHANGE OF LAMELLAE UNDER PLASMA SPRAY CONDITIONS
pp. 191-204
DOI: 10.1615/HighTempMatProc.v11.i2.40
ARC PLASMA DEVICES FOR TREATMENT OF DIFFERENT WASTES
pp. 219-230
DOI: 10.1615/HighTempMatProc.v11.i2.60
BIOFUEL AND HYDROGEN PRODUCTION FROM BIOMASS GASIFICATION BY USE OF THERMAL PLASMA
pp. 231-244
DOI: 10.1615/HighTempMatProc.v11.i2.70
CHLOROFORM DESTRUCTION BY INDUCTIVE PLASMA PROCESS
pp. 245-256
DOI: 10.1615/HighTempMatProc.v11.i2.80
Energy interchange channels analysis and parameters of RF plasma torch calculations
pp. 269-282
DOI: 10.1615/HighTempMatProc.v11.i2.100
EFFECTS OF PLASMA PARAMETERS ON PASSIVATION OF POLYCRYSTALLINE SILICON IN INDUCTIVE LOW PRESSURE HYDROGEN PLASMA
pp. 297-308
DOI: 10.1615/HighTempMatProc.v11.i2.120
Последний выпуск
DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE
RHEOLOGICAL BEHAVIOR AND 3D PRINTING OF HIGHLY FILLED ALUMINA-POLYAMIDE FILAMENTS DURING FUSED DEPOSITION MODELING
SCRATCH TESTING OF ZrN COATING ON TI-6AL-4V TITANIUM ALLOY SURFACE PRELIMINARY TREATED BY COMPRESSION PLASMA FLOWS IMPACT
ELECTRON-BEAM SINTERING OF ZIRCONIUM DIOXIDE/TITANIUM CERAMICS FOR MICROELECTRONICS PRODUCTS
THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET
PREPARATION AND THERMOELECTRIC PROPERTIES OF p-TYPE Ag(1-x)Cu(1+x)Te SAMPLES BY SPARK PLASMA SINTERING METHOD
ELECTRON-BEAM SYNTHESIS OF ZIRCONIA CERAMIC COATINGS IN THE FOREVACUUM PRESSURE RANGE
INCREASING THE WEAR RESISTANCE OF TITANIUM ALLOYS BY DEPOSITION OF A MODIFYING COATING (Zr,Nb)N
PHYSICAL AND MECHANICAL PROPERTIES AND OPERATIONAL CHARACTERISTICS OF CORONA SPRAYED POWDER COATINGS
Статьи, принятые к публикации
Application of a non-self-sustained glow discharge initiated by a focused electron beam in the forevacuum pressure region for nitriding the inner surface of narrow metal tubes
PLASMA DISCHARGE IN LIQUID MEDIA UNDER THE EFFECT OF ULTRASOUND FOR THE SYNTHESIS OF FILLERS FOR POLYMER COMPOSITES WITH ENHANCED MECHANICAL STRENGTH AND GAS PERMEABILITY
THE QUALITY OF THIN-WALLED STRUCTURES OF AlSi10Mg PRODUCED BY SELECTIVE LASER MELTING
Electron-beam synthesis of zirconia ceramic coatings in the forevacuum pressure range
Preparation and Thermoelectric Properties of P-type Ag(1-x)Cu(1+x)Te Samples by SPS Method
The effect of the fluorine concentration in a plasma-forming gas mixture on the chemical composition, surface charge and relief parameters of fluorocarbon coatings on PET
Electron beam sintering of zirconium dioxide/titanium ceramics for microelectronics products