Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
ESCI SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN Печать: 1093-3611
ISSN Онлайн: 1940-4360

Выпуски:
Том 24, 2020 Том 23, 2019 Том 22, 2018 Том 21, 2017 Том 20, 2016 Том 19, 2015 Том 18, 2014 Том 17, 2013 Том 16, 2012 Том 15, 2011 Том 14, 2010 Том 13, 2009 Том 12, 2008 Том 11, 2007 Том 10, 2006 Том 9, 2005 Том 8, 2004 Том 7, 2003 Том 6, 2002 Том 5, 2001 Том 4, 2000 Том 3, 1999 Том 2, 1998 Том 1, 1997

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.2018026422
pages 17-34

INFLUENCE OF POST-WELDING HEAT TREATMENT ON MECHANICAL AND MICROSTRUCTURAL BEHAVIOR OF FRICTION STIR WELDED AA7075-T651 AND AA6061 DISSIMILAR JOINTS

Kunnathur Periyasamy Yuvaraj
Sri Krishna College of Engineering and Technology, Kuniamuthur, Coimbatore, Tamil Nadu 641008, India
P. Ashoka Varthanan
Sri Krishna College of Engineering and Technology, Kuniamuthur, Coimbatore, Tamil Nadu 641008, India
K. P. Boopathiraja
Sri Krishna College of Engineering and Technology, Kuniamuthur, Coimbatore, Tamil Nadu 641008, India

Краткое описание

In this investigation, impact of post-welding heat treatment on the mechanical and microstructural behavior of friction stir welded AA7075-T651 and AA6061 dissimilar joints was investigated. Post-welding heat treatment can be done by the artificial aging method at two different temperatures, 120°C and 160°C, along with three different holding times of 5 h, 10 h, and 15 h. The welded joint exposed to PWHT temperature of 120°C with 15-h holding time is found to be effective in maximizing the tensile strength of a joint about 286 N/mm2 with a joint efficiency of 64.8% and hardness of 141 HV. The welded joint after post-welding heat treatment at 120°C with 15-h holding time withstands the maximum bending load of 3.85 kN along with 40-mm displacement.


Articles with similar content:

APPLICATION OF ENERGETIC MATERIALS IN LASER ABLATIVE MICROPROPULSION
International Journal of Energetic Materials and Chemical Propulsion, Vol.14, 2015, issue 1
Long Jiao, Jian Cai, Zhaowu Shen, Zhiping Tang, Honghao Ma, Long Li
TAGUCHI OPTIMIZATION OF PROCESS PARAMETERS IN FRICTION STIR WELDING OF THE AA7010–SiC–Al2O3 HYBRID COMPOSITE
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.20, 2016, issue 3
K. Siva, Ponnusamy Gopi Krishnan
FABRICATION AND CHARACTERIZATION OF POLYVINYL ALCOHOL INFILTRATED POLYURETHANE FOAMS FOR ENERGY ABSORPTION APPLICATIONS
Nanoscience and Technology: An International Journal, Vol.10, 2019, issue 2
Jasdeep Bhinder, Prabhat Agnihotri
Design Optimization of Skeletal Hip Implant Cross- Sections Using Finite-Element Analysis
Journal of Long-Term Effects of Medical Implants, Vol.19, 2009, issue 4
Sudesh Sivarasu, Pearline Beulah, Lazar Mathew
Heat Generated by Hip Resurfacing Prostheses: An in Vivo Pilot Study
Journal of Long-Term Effects of Medical Implants, Vol.21, 2011, issue 1
James Pritchett