Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
ESCI SJR: 0.176 SNIP: 0.48 CiteScore™: 1.3

ISSN Печать: 1093-3611
ISSN Онлайн: 1940-4360

Выпуски:
Том 24, 2020 Том 23, 2019 Том 22, 2018 Том 21, 2017 Том 20, 2016 Том 19, 2015 Том 18, 2014 Том 17, 2013 Том 16, 2012 Том 15, 2011 Том 14, 2010 Том 13, 2009 Том 12, 2008 Том 11, 2007 Том 10, 2006 Том 9, 2005 Том 8, 2004 Том 7, 2003 Том 6, 2002 Том 5, 2001 Том 4, 2000 Том 3, 1999 Том 2, 1998 Том 1, 1997

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

DOI: 10.1615/HighTempMatProc.v5.i1.50
25 pages

MODELING OF THE PLASMA SPRAY PROCESS : FROM POWDER INJECTION TO COATING FORMATION

G. Mariaux
Laboratoire Sciences des Procedes Ceramiques et de Traitements de Surface UMR CNRS 6638 University of Limoges 123 avenue Albert Thomas, 87060 LIMOGES - France
Pierre Fauchais
Laboratoire Sciences des Procedes Ceramiques et de Traitements de Surface UMR CNRS 6638 University of Limoges 123 avenue Albert Thomas, 87060 LIMOGES - France
Armelle Vardelle
ENSIL, ESTER Technopole, 87068 Limoges - France
Bernard Pateyron
Laboratoire SPCTS UMR CNRS 7315, ENSCI, Centre Europeen de la Ceramique, Limoges, France

Краткое описание

This paper presents a numerical simulation of the plasma-spraying of alumina particles. The first section deals with the coating formation. The latter is governed by various time-scales ranging between microseconds (splat flattening and solidification) and seconds (time between two passes). This large range makes the deposit process difficult to simulate. However, such simulations would help to have a better understanding of coating building and, therefore, a better control of coating quality. The second section addresses the modeling of the plasma jet and particle treatment using a three-dimensional commercial fluid dynamics code ESTET 3.4 The effect of (i) turbulence model and turbulence radial profiles at the torch exit on plasma flow and particle behavior, (ii) particle injection conditions on particle trajectories and heating and (iii) plasma jet fluctuations on temperature and velocity flow fields is investigated The comparison of predictions with experimental measurements of gas and particle velocity and temperature, makes it possible to determine the influential parameters and set them to pertinent values.


Articles with similar content:

MODELING OF THE PLASMA SPRAY PROCESS: FROM POWDER INJECTION TO COATING FORMATION
Progress in Plasma Processing of Materials, 2001, Vol.0, 2001, issue
G. Mariaux, Bernard Pateyron, Pierre Fauchais, Armelle Vardelle
2-D AND 3-D FLUIDYNAMIC AND PLASMA CHARACTERIZATION OF DC TRANSFERRED ARC PLASMA TORCHES FOR METAL CUTTING
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.10, 2006, issue 3
S. Dallavalle, G. Masini, D. Russo, Vittorio Colombo, M. Vancini, Emanuele Ghedini
PROCESS MODELLING AND -CONTROL OF ATMOSPHERIC PLASMA SPRAYING OF ALUMINA COATINGS
Progress in Plasma Processing of Materials, 1997, Vol.1, 1997, issue
F. Ladru , K. D. Landes, U. Eritt, W. Mayr, A. Reusch, Erick Lugscheider
MAGNETIC FIELD SUPPRESSION OF MELT FLOW IN CRYSTAL GROWTH
ICHMT DIGITAL LIBRARY ONLINE, Vol.4, 2001, issue
George S. Dulikravich, Brian H. Dennis
PARTICLE DEPOSITION ON A CYLINDER IN CROSSFLOW: NUMERICAL SIMULATION AND EXPERIMENTAL VALIDATION
Proceedings of an International Conference on Mitigation of Heat Exchanger Fouling and Its Economic and Environmental Implications, Vol.0, 1999, issue
F. Bailer, J. M. Grillot, P. Tochon