Journal of Enhanced Heat Transfer
Выходит 8 номеров в год
ISSN Печать: 1065-5131
ISSN Онлайн: 1563-5074
IF:
2.3
5-Year IF:
1.8
Immediacy Index:
0.2
Eigenfactor:
0.00037
JCI:
0.6
SJR:
0.433
SNIP:
0.593
CiteScore™::
4.3
H-Index:
35
Indexed in
The Transpirator, A New Evaporative Cooler
Том 2,
Выпуск 1-2, 1995,
pp. 79-85
DOI: 10.1615/JEnhHeatTransf.v2.i1-2.90
Краткое описание
Transpirators are light and efficient evaporative coolers which were proposed for space-technology (Ernst and Alf [1988-1993]). Till now they are constructed with commercially available materials.
The cooling capacity of single Transpirator-elements and of a Transpirator-cooler, equipped with nine elements, was determined. On the base of the experimental results, a mathematical model for the calculation of the cooling capacity was developed.
Advantages of Transpirators are:
−No loss of evaporating coolant in liquid or solid state
−Low weight and low volume
−Good adaptability to different heat flows and different temperature levels
493 Просмотры статей
8 Загрузка статей
Метрики
Статьи с похожим содержанием:
Последний выпуск
EXPERIMENTAL AND THEORETICAL CHARACTERIZATION OF TWO-PHASE FLOW DISTRIBUTION IN UNBALANCED FLOW NETWORKS
FIELD EXPERIMENTAL INVESTIGATION OF THE INSULATION DETERIORATION CHARACTERISTICS OF OVERHEAD PIPELINE FOR STEAM HEATING NETWORK
FLOW AND HEAT-TRANSFER CHARACTERISTICS IN SMALL-DIAMETER TUBE BUNDLES WITH A STAGGERED LAYOUT: AN EXPERIMENTAL STUDY
A PARAMETRIC AND COMPARATIVE STUDY ON BARE-TUBE BANKS AND NEW CAM-SHAPED TUBE BANKS FOR WASTE HEAT RECOVERY APPLICATIONS
POOL BOILING HEAT TRANSFER CHARACTERISTICS OF POROUS NICKEL MICROSTRUCTURE SURFACES
Статьи, принятые к публикации
Flow Boiling Heat Transfer in Microchannel Heat Exchangers with Micro Porous Coating Surface
Enhancement Evaluation Criteria for Pool Boiling Enhancement Structures in Electronics Cooling: CHF Enhancement Ratio (ER-CHF) and Enhancement Index (EI)
Influence of transient heat pulse on heat transfer performance of vapor chamber with different filling ratios
Effect of Geometrical Parameters on the Thermal-Hydraulic Performance of Internal Helically Ribbed Tubes
Condensation heat transfer in smooth and three-dimensional dimpled tubes of various materials
In Memoriam of Professor Ralph L. Webb on the anniversary of his 90th birthday
Analysis of the Single-Blow Transient Testing Technique for Non-metallic Heat Exchangers
Evaluation of Heat Transfer Rate of Double-Layered Heat Sink Cooling System with High Energy Dissipation
Experimental Investigation on Behavior of a Diesel Engine with Energy, Exergy, and Sustainability Analysis Using Titanium Oxide (Tio2) Blended Diesel and Biodiesel
COLLISION MORPHOLOGIES OF SUPERCOOLED WATER DROPLETS ON SMALL LOW-TEMPERATURE SUPERHYDROPHOBIC SPHERICAL TARGETS
Pool boiling heat transfer characteristics of porous nickel microstructure surfaces
Field experimental investigation of the insulation deterioration characteristics of overhead pipeline for steam heating network
A parametric and comparative study on bare-tube banks and new-cam-shaped tube banks for waste heat recovery applications