Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Heat Pipe Science and Technology, An International Journal

ISSN Печать: 2151-7975
ISSN Онлайн: 2151-7991

Archives: Volume 1, 2010 to Volume 8, 2017

Heat Pipe Science and Technology, An International Journal

DOI: 10.1615/HeatPipeScieTech.2011003621
pages 279-302

GLOBAL EFFECTIVENESS OF PULSATING HEAT PIPE HEAT EXCHANGERS: MODELING AND EXPERIMENTS

Sameer Khandekar
Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur (UP) 208016, India
Vivek Silwal
Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur (UP) 208016 India
Ashutosh Bhatnagar
Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur (UP) 208016 India
Pavan Kumar Sharma
Reactor Safety Division, Bhabha Atomic Research Center, Mumbai-400085, India

Краткое описание

Pulsating heat pipes (PHPs) are an interesting class of passive two-phase heat transfer systems incorporating self-excited thermally driven oscillations for achieving a high rate of heat transfer. While many applications of PHPs have emerged, a systematic analysis of heat exchangers based on this technology has not been reported. In this work, two possible configurations of PHP-based heat exchangers, for process waste heat exchange as well as high heat flux handling needs, respectively, have been explored, scrutinized, and analyzed. These two configurations are (1) temperature-controlled liquid-liquid non-contact-type heat exchangers and (2) heat flux-controlled air-cooled systems. These two types of systems are performance tested under different operating conditions. Given the fact that the fundamental transport modeling scheme for PHPs is still not available, it is shown that global modeling of these devices can still be achieved. The temperature controlled PHP system is effectively modeled by conventional heat exchanger analysis techniques; i.e., the NTU-ε method. The heat flux-controlled PHP system is modeled by fin analogy employing the conventional theory of extended surface heat transfer, as applicable to diffusion fins. The mathematical modeling with these two systems is presented and limitations of global modeling are also discussed. The effectiveness values for the temperature-controlled heat exchanger system consisting of bare and un-finned PHP tubes, operating under gravity-assisted mode, were of the order of ∼ 0.25−0.45. The heat flux controlled mode has more favorable performance with overall thermal resistance lower than ∼ 0.2 K/W, corresponding to an effective thermal conductivity of PHPs in the range of 500−4500 W/mK for simple air cooling on bare tubes.


Articles with similar content:

On Reduced Models of Discrete Dynamic Objects and Their Guaranteed Estimates in Control Problems
Journal of Automation and Information Sciences, Vol.33, 2001, issue 3
Vsevolod M. Kuntsevich
ANALYSIS OF THE EFFECT OF THE STRUCTURE OF A CAPILLARY PUMPED LOOP ON TEMPERATURE OF DUAL CPUs 1U CLOUD SERVERS
Heat Transfer Research, Vol.44, 2013, issue 1
Wei-Keng Lin, Yeun-Ming Tzou, Yu-An Lin
Experimental Investigation of Thermal Performance of Phase Change Material Based Composite Heat Sinks with Discrete Heat Sources
International Heat Transfer Conference 15, Vol.49, 2014, issue
Chakravarthy Balaji, Srikanth R
PROOF OF CONCEPT OF PHASE CHANGE MATERIAL (PCM) BASED THERMAL CONTROL SYSTEM FOR SPACECRAFT PAYLOADS
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Vol.0, 2017, issue
V. K. Singh, R. R. Bhavsar, A. A. Gunjal, S. A. Channiwala
INVESTIGATION OF THE THERMAL PERFORMANCE OF MINIATURE LOOP HEAT PIPE WITH WATER-COPPER NANOFLUID
Heat Pipe Science and Technology, An International Journal, Vol.4, 2013, issue 3
Xiao-Wu Wang, Yanxiao Xu, Zhenping Wan, Yong Tang