Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.149 SNIP: 0.16 CiteScore™: 0.29

ISSN Печать: 2150-766X
ISSN Онлайн: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.v5.i1-6.930
pages 918-926

T-BURNER RESPONSE ANALYSIS USING THE SPP/SSP CODE

Fred S. Blomshield
Naval Air Warfare Center-Weapons Division, NAVAIR, China Lake, CA 93555
D. E. Coats
Software and Engineering Associates, 1802 North Carson Street, Suite 200, Carson City, NV 89701
S. S. Dunn
Software and Engineering Associates, 1802 North Carson Street, Suite 200, Carson City, NV 89701
J. C. French
Software and Engineering Associates, 1802 North Carson Street, Suite 200, Carson City, NV 89701

Краткое описание

This paper presents the results of a study to compare the stability results of the SPP/SSP code to actual T-Burner experimental data. The SPP/SSP code is the standard solid rocket motor performance program coupled to the Standard Stability Program. Four unique propellants were compared. Two were reduced smoke and two were metallized propellants. Pressure coupled response data was already available for these propellants. This experimental data was evaluated by the T-burner. For the metallized propellants, aluminum oxide particle analysis was also previously performed on the combustion products. The stability analysis was performed using the three- dimensional grain design and ballistic modules and the one dimensional stability module. Types of driving and damping mechanisms included in the analysis included pressure coupling, wall damping and for the metallized propellants, particle damping. The total predicted stability was then compared against the decay and/or growth measured in the T-Burner during a test. The results were surprising in that both the magnitude and trends in the analysis were verified by the data.


Articles with similar content:

EXAMPLES OF UNSTEADY COMBUSTION IN NON-METALLIZED PROPELLANTS
International Journal of Energetic Materials and Chemical Propulsion, Vol.5, 2002, issue 1-6
K. V. Meredith, Fred S. Blomshield, Merrill W. Beckstead
CONTAINED LOW PRESSURE COMBUSTION OF NIKE AND IMPROVED HAWK ROCKET MOTORS: EXPERIMENTAL TECHNIQUES AND EMISSIONS MEASUREMENTS
International Journal of Energetic Materials and Chemical Propulsion, Vol.5, 2002, issue 1-6
Carol Velsko, Solim Kwak, Christopher Shaddix, Raymond Peabody, Joel Lipkin, John Carson, Sam Williams, Sarah Allendorf, Albert Moeller, William Bellow, John R. Stephens, Walter Gray, Bruce Watkins
PERFORMANCE DEPENDENCY OF 120 mm MORTAR ON AMBIENT TEMPERATURE CONDITIONS
International Journal of Energetic Materials and Chemical Propulsion, Vol.12, 2013, issue 6
Eric Boyer, Kenneth K. Kuo, Heath T. Martin
SEMI-ANALYTICAL MODEL FOR SUBSONIC TAILPIPE: EFFECTS ON SOLID ROCKET MOTOR PERFORMANCE
International Journal of Energetic Materials and Chemical Propulsion, Vol.13, 2014, issue 2
Rodrigo R. Rapozo
HEAT TRANSFER − COMBUSTION INTERACTIONS IN NEAR-WALL CHEMICALLY REACTING FLOWS
International Heat Transfer Conference 9, Vol.4, 1990, issue
B. Rogg