Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.149 SNIP: 0.16 CiteScore™: 0.29

ISSN Печать: 2150-766X
ISSN Онлайн: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.2013004244
pages 429-446

FACTORS INFLUENCING IGNITION AND EXPLOSION CHARACTERISTICS OF EXPLOSIVES UNDER DROP WEIGHT IMPACT

Qi Zhang
State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, China
Shaoqiao Hu
State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, China

Краткое описание

Impacting explosive cylinders with a shell of steel by the use of drop weight is the experimental standard to examine the impact sensitivity of explosives in China. Whether the prescriptive experimental parameters in the standard are reasonable or not needs to be investigated. It is difficult to observe the detailed processes of ignition and explosion for the explosive cylinder with a shell of steel under impact of drop weight in the experiment. The detailed information of the ignition and explosion for the impacted explosive cylinders corresponding to the standard experimental condition was investigated by numerical simulation in this study. The numerical results show that the 1.8 cm thickness of shell currently prescribed is most suitable. If the thickness of the steel shell in the impact experiments is less than 1 cm, the experimental results do not simulate the real state conditions of the impacted explosive cylinder in the process of launching. The predicted time initiating explosion (duration from beginning of load impacting the explosive cylinder to initiating explosion) under the standard experimental condition is on the order of 100 µs.


Articles with similar content:

DROP IMPACT ONTO A CANTILEVER BEAM: BEHAVIOR OF THE LAMELLA AND FORCE MEASUREMENT
Interfacial Phenomena and Heat Transfer, Vol.7, 2019, issue 1
Alidad Amirfazli, Xurui Zhang, Zhenghe Xu, Qingxia Liu, Anastasios Georgoulas, Marco Marengo, Huanchen Chen, Marin Deflorin, Beatriz Defez Garcia
Flow Boiling Heat Transfer and Two-Phase Flow in Microgravity
International Heat Transfer Conference 15, Vol.1, 2014, issue
Giuseppe Zummo, C.M. Valencia, Luca Saraceno, Gian Piero Celata
THE IGNITION AND COMBUSTION OF BORON DUST SYSTEMS
International Journal of Energetic Materials and Chemical Propulsion, Vol.2, 1993, issue 1-6
A. N. Zolotko
FLOW BOILING HEAT TRANSFER IN MICROGRAVITY
International Heat Transfer Conference 13, Vol.0, 2006, issue
Gian Piero Celata
Flow Boiling Heat Transfer in Microgravity
ICHMT DIGITAL LIBRARY ONLINE, Vol.12, 2005, issue
Gian Piero Celata