Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.142 SNIP: 0.16 CiteScore™: 0.29

ISSN Печать: 2150-766X
ISSN Онлайн: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.2015014267
pages 437-451

CURING REACTION AND RHEOLOGICAL PROPERTIES OF THE SLURRY OF AN HTPB/CL-20-BASED COMPOSITE EXPLOSIVE

Yanju Wei
Chemical Industry and Ecology Institute, North University of China, Taiyuan Shanxi, 030051, China
Jing-Yu Wang
School of Chemical and Environmental Engineering, North University of China, Taiyuan, Shanxi 030051, P.R. China
Chongwei An
School of Chemical and Environmental Engineering, North University of China, Taiyuan, Shanxi 030051, P.R. China
Hequn Li
School of Chemical and Environmental Engineering, North University of China, Taiyuan, Shanxi 030051, P.R. China

Краткое описание

The curing and rheological properties of the slurry of an hydroxyl-terminated polybutadiene (HTPB)/2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20)-blended explosive were studied using differential scanning calorimetry and viscosity measurements. The curing kinetic parameters of the slurry were calculated using the Kissinger method and the Ozawa method to obtain a dual-Arrhenius model under thermostatic conditions. The activation energy for the curing reaction of the slurry was found to be 150.72 kJ/mol and the optimal cross-linking curing temperature was found to be 142.27°C. The dual-Arrhenius model of the slurry under thermostatic conditions was ηt = 228.12 exp (18.50 / T) exp [0.02 exp (7.98 / T) t]. As predicted by this model, the viscosity of the HTPB/CL-20-based composite explosive slurry under thermo-static conditions was consistent with experimental results.


Articles with similar content:

OPTIMIZATION OF THE MECHANICAL AND COMBUSTION PROPERTIES OF A NEW GREEN AND INSENSITIVE GUN PROPELLANT USING DESIGN OF EXPERIMENTS
International Journal of Energetic Materials and Chemical Propulsion, Vol.10, 2011, issue 5
Charles Nicole, Frederick Paquet, Sylvie Brochu, Catalin Florin Petre
TRANSIENT BURNING BEHAVIOR OF PHASE-STABILIZED AMMONIUM NITRATE BASED AIRBAG PROPELLANT
International Journal of Energetic Materials and Chemical Propulsion, Vol.11, 2012, issue 5
Eric Boyer, Jonathan T. Essel, Baoqi Zhang, Kenneth K. Kuo
ATOMIZATION OF NON-NEWTONIAN LIQUIDS
ICLASS 94
Proceedings of the Sixth International Conference on Liquid Atomization and Spray Systems, Vol.0, 1994, issue
Norman Chigier, Adel Mansour
NG PLASTICIZED PE−PCP BINDER-BASED ADVANCED SOLID ROCKET PROPELLANTS: STUDIES ON MECHANICAL PROPERTIES
International Journal of Energetic Materials and Chemical Propulsion, Vol.11, 2012, issue 2
Haridwar Singh, Debdas Bhowmik, Shrikant M. Pande, Vaibhav S. Sadavarte
TEMPERATURE-DEPENDENT DYNAMIC VISCOSITY OF TWO SUGAR ALCOHOLS AND THEIR BINARY EUTECTIC MIXTURE AS HEAT STORAGE MATERIALS
International Heat Transfer Conference 16, Vol.24, 2018, issue
Yong-Jian Yang, Xue-Feng Shao, Biao Feng, Chen-Lin Chen, Zi-Qin Zhu, Li-Wu Fan