Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.149 SNIP: 0.16 CiteScore™: 0.29

ISSN Печать: 2150-766X
ISSN Онлайн: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.v6.i2.20
pages 153-169

MODIFIED BURNING RATE SPECTRUM & COMBUSTION MECHANISM OFTETRA-OLGAP

Sumito Togo
Institute of Space & Astronautical Science/Japan Aeropace Exploration, Agency, JAPAN
Kiyokazu Kobayashi
Institute of Space & Astronautical Science/Japan Aeropace Exploration Agency (JAXA), Japan
Toru Shimada
ISAS, Japan Aerospace Exploration Agency, 3-1-1 Yoshinodai, Chuo-ku, Sagamihara, Kanagawa 252-5210, Japan
Yasushi Niimi
NOF Corporation, JAPAN
Yoshio Seike
NOF Corporation, JAPAN
Makihito Nishioka
University of Tsukuba, 1-1-1, Tennodai, Tsukuba, Ibaraki, 305-8577, Japan
Keiichi Hori
Institute of Space and Astronautical Science (ISAS), Japan Aerospace Exploration Agency (JAXA), 3-1-1 Yoshinodai, Chuo-Ku, Sagamihara, Kanagawa 252-5210, Japan

Краткое описание

Attempts were made to extend the burning rate spectrum of glycidyl azide polymer (GAP) towards both upper and lower sides. Nano-sized aluminum and carbon nanofibres (CNF) were used to enhance the burning rate of GAP, and polyethylene glycol (PEG) was used to lower the burning rate. PEG addition is very effective and burning rate is lowered below 4mm/s even at 10MPa. Mechanical properties were also evaluated and shown to be good enough for practical use. Static firing tests of GAP as a gas generator for hybrid rockets were successfully performed in small size rocket motors, and the detail of them are presented and discussed. Combustion mechanism of cured tetra-ol GAP based upon the Beckstead model was developed using the results of fine thermocouple temperature measurement. Some modifications are made to adjust experimental results.

Ключевые слова: GAP, burning rate, firing test, C* efficiency, combustion model

Articles with similar content:

DEVELOPMENT OF A DIRECT INJECTION GAS-HYBRID ROCKET SYSTEM USING GLYCIDYL AZIDE POLYMER
International Journal of Energetic Materials and Chemical Propulsion, Vol.18, 2019, issue 2
S. Hatano, Yo Kawabata, Keiichi Hori, Ayana Banno, T. Oda, Hiroshi Hasegawa, Yutaka Wada
GLYCIDYL AZIDE POLYMER AND POLYETHYLENE GLYCOL MIXTURES AS HYBRID ROCKET FUELS
International Journal of Energetic Materials and Chemical Propulsion, Vol.11, 2012, issue 2
Koji Fujisato, Yuya Nomura, Motoyasu Kimura, Takeshi Yagishita, Makihito Nishioka, Keiichi Hori, Yutaka Wada
GLYCIDYL AZIDE POLYMER−COMBUSTION MECHANISM AND ITS APPLICATION TO HYBRID ROCKET MOTORS
International Journal of Energetic Materials and Chemical Propulsion, Vol.11, 2012, issue 4
Makihito Nishioka, Keiichi Hori
OBSERVATION OF COMBUSTION BEHAVIOR OF LOW MELTING TEMPERATURE FUEL FOR A HYBRID ROCKET USING DOUBLE SLAB MOTOR
International Journal of Energetic Materials and Chemical Propulsion, Vol.15, 2016, issue 5
Ryuichi Kato, Yo Kawabata, Nobuji Kato, Keiichi Hori, Yutaka Wada
PARAMETRIC INVESTIGATION OF SUPERSONIC COMBUSTION OF SOLID FUELS
International Journal of Energetic Materials and Chemical Propulsion, Vol.5, 2002, issue 1-6
Alon Gany, Igor Feldman