Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.149 SNIP: 0.16 CiteScore™: 0.29

ISSN Печать: 2150-766X
ISSN Онлайн: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.v6.i2.10
pages 143-151

AGGLOMERATION AND IGNITION OF ALUMINUM PARTICLES COATED BY NICKEL

Valery Rosenband
Faculty of Aerospace Engineering, Technion- Israel Institute of Technology, Haifa 32000, Israel
Alon Gany
Sylvia and David IA Fine Rocket Propulsion Center and the Aerothermodynamics Lab, Faculty of Aerospace Engineering, Technion – Israel Institute of Technology, Haifa, 3200003, Israel

Краткое описание

Agglomeration and ignition of aluminum particles coated by nickel have been investigated. A controlled chemical deposition technique for coating aluminum particles by nickel was developed. Coated Al particles with nickel content from 1 to 15 wt% were produced. Investigations of the behavior of the nickel-coated Al particles during their heating in nitrogen and air were carried out. It was shown that, while uncoated Al particles agglomerate during heating, the coated aluminum particles do not agglomerate and remain in a powder form. Also, experiments demonstrated better ignitability of the nickel-coated Al particles in comparison with regular Al particles, where ignition temperature depends on the initial nickel content. Improvement of ignitability of the coated Al particles is explained by the exothermic reaction between nickel and aluminum and by thermal and mechanical properties of the formed intermetallics.


Articles with similar content:

THE IGNITION AND COMBUSTION OF BORON DUST SYSTEMS
International Journal of Energetic Materials and Chemical Propulsion, Vol.2, 1993, issue 1-6
A. N. Zolotko
STEEL 45 SURFACE MODIFICATION BY A COMBINED ELECTRON-ION-PLASMA METHOD
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.19, 2015, issue 1
I. A. Ikonnikova, Yu. A. Denisova, O. V. Ivanova, V. E. Gromov, Yurii F. Ivanov, E. A. Budovskikh, S. Yu. Filimonov
Alumina coatings from aluminium electrodeposited in molten salts
Advances in Molten Salts, Vol.0, 1998, issue
Pr. V. Hasthorpe, Ir. S. Delhaye
WHY AND HOW TYPE OF PASSIVATION LAYER AFFECTS THE PROPERTIES OF ALUMINUM NANOPOWDERS FOR ENERGETIC APPLICATIONS
International Journal of Energetic Materials and Chemical Propulsion, Vol.6, 2007, issue 2
Alexander Gromov, Ulrich Forter-Barth, Ulrich Teipel
On Applicability of the Kinetics of Diffusion-Controlled Interaction to SHS Modeling
Heat Transfer Research, Vol.38, 2007, issue 3
B. Formanek, B. B. Khina