Inscrição na biblioteca: Guest
Portal Digital Begell Biblioteca digital da Begell eBooks Diários Referências e Anais Coleções de pesquisa
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.28 SNIP: 0.421 CiteScore™: 0.9

ISSN Imprimir: 2150-766X
ISSN On-line: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.v7.i4.20
pages 281-291

A PROOF OF GUN PERFORMANCE IMPROVEMENT BY USING THE "ETC" CONCEPT

D. Zoler
Propulsion Physics Laboratory, Soreq NRC, Yavne 81800; School of Physics and Astronomy, Tel-Aviv University
N. Shafir
Propulsion Physics Laboratory, Soreq NRC, Yavne 81800
A. Ravid
Propulsion Physics Laboratory, Soreq NRC, Yavne 81800
S. Wald
Propulsion Physics Laboratory, Soreq NRC, Yavne 81800
D. Forte
Propulsion Physics Laboratory, Soreq NRC, Yavne 81800
E. Kot
Propulsion Physics Laboratory, Soreq NRC, Yavne 81800
M. Sudai
Propulsion Physics Laboratory, Soreq NRC, Yavne 81800

RESUMO

The aim of this work is to present a summary of the results obtained at Soreq NRC in the attempt to prove that a proper use of the electrothermal-chemical (ETC) concept may, indeed, lead to significant improving of conventional guns ballistic performance. The meaning is to show that, by using plasma jets with controlled energetic and flow characteristics as igniting agents, better interior ballistic processes (i.e. more uniform propellant ignition as well as more safer and reproducible gun operation than in the case of the conventional ignition) can be obtained and, finally, significantly larger projectile muzzle energy (velocity) can be reached. The way to achieve this goal is by "forcing" the "cold" charges to perform as "hot" ones (achieving the so-called "temperature gradient" compensation). In addition, one must try to accomplish these goals by using reasonable electrical energies (which would allow the reduction of the mass and volume of the power supply) and also avoiding significant changes in the conventional gun topography in order to prevent unacceptable costs. The research work was performed by using a standard 105 mm gun (concerning its barrel length and burning chamber volume) and a standard propellant. The results show that improved performances (a more than 28% increase of the projectile muzzle energy) can be achieved by using denser charges ignited by plasma jets with appropriate energies. In addition, the capability to obtain significant compensation of the so-called "temperature gradient" effect was proven and the capacity of plasma as an ignition factor to provide "ballistic gain" has also been demonstrated.


Articles with similar content:

DEVELOPMENT OF HAN-BASED LIQUID PROPELLANT THRUSTER
International Journal of Energetic Materials and Chemical Propulsion, Vol.7, 2008, issue 2
Hiroyuki Mishima, Shujiro Sawai, Toshiyuki Katsumi, Keiichi Hori, Tetsuya Matsuo, Kenji Hisatsune
RECENT DEVELOPMENTS IN GUN PROPELLANTS AND GUN PROPULSION RESEARCH AT S.N.P.E.
International Journal of Energetic Materials and Chemical Propulsion, Vol.4, 1997, issue 1-6
Jean-Paul Reynaud
LOW TEMPERATURE COEFFICIENT (LTC) PROPELLANTS
International Journal of Energetic Materials and Chemical Propulsion, Vol.6, 2007, issue 3
Walter Langlotz, Dietmar Mueller
CHARACTERIZATION OF THE COMBUSTION BEHAVIOR OF GAS-GENERATING PYROTECHNICS USING GUN PROPELLANT TECHNOLOGY METHODS
International Journal of Energetic Materials and Chemical Propulsion, Vol.5, 2002, issue 1-6
M. H. Lefebvre, K. Engelen, J. De Ruyck
INFLUENCE OF THERMAL BEHAVIOUR OF A PHOTOVOLTAIC MODULE ON ITS ELECTRICAL PERFORMANCE
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2012, issue
Christophe Menezo, Mohamed Amara, Lucas Weiss