ライブラリ登録: Guest
International Heat Transfer Conference 13
Graham de Vahl Davis (open in a new tab) School of Mechanical and Manufacturing Engineering, University of New South Wales, Kensington, NSW, Australia
Eddie Leonardi (open in a new tab) Computational Fluid Dynamics Research Laboratory, School of Mechanical and Manufacturing Engineering, The University of New South Wales, Sydney, Australia 2052

ISSN Online: 2377-424X

ISBN CD: 1-56700-226-9

ISBN Online: 1-56700-225-0

MICROSCALE TWO PHASE HEAT TRANSFER ENHANCEMENT IN POROUS STRUCTURES

page 10
DOI: 10.1615/IHTC13.p5.220
Get accessGet access

要約

Following the literature many investigations have been performed to provide a better understanding of two-phase heat transfer at microscale, which is very important in electronics and optoelectronic components cooling. However, these studies haven't yet leaded to a general conclusion. Recently in the Porous Media Laboratory (Minsk, Belarus) some experiments were carried out encompassed on investigation of mini/micro scale heat transfer of two-phase fluids (propane) at heat flux ranges 102−105 W/m2. Experimental investigation of pool boiling and evaporation heat transfer in mini channels on single horizontal tube (smooth and with porous coating) was performed for the reasons of analysis of its cooling efficiency. The data obtained on a flooded and partially flooded horizontal tube with porous coating in the liquid pool or in confined space (from 0.1 to 2 mm) testify the phenomena of micro heat pipe inside a porous structure. A micro scale effect took place inside the porous body and a mini-scale effect was ensured due to flank or annular mini channel. Cylindrical heat releasing tube with porous surface disposed inside the transparent coaxial glass tube with annular mini channel between has all particularities of micro-scale and mini-scale effects of the heat transfer. Visual analysis and experimental results show, that such combination is favorable for the enhancement of the evaporation and two-phase convection heat transfer. The availability of annular mini channel significantly promotes to intense heat transfer (up to 2.5−3 times as high) at heat fluxes < 50 kW/m2, as compared with process in the liquid pool.

Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集 価格及び購読のポリシー Begell House 連絡先 Language English 中文 Русский Português German French Spain