ライブラリ登録: Guest
ICHMT DL ホーム 今年 アーカイブ 執行委員会 熱・物質移動国際センター

Heat transfer in inclined and direct impinging synthetic jets

DOI: 10.1615/ICHMT.2012.ProcSevIntSympTurbHeatTransfPal.2360
pages 2293-2304

Udaysinh S. Bhapkar
Department of Mechanical Engineering, Indian Institute of Technology, Bombay, Mumbai, 400076, India

B. Puranik
Department of Mechanical Engineering, Indian Institute of Technology, Bombay, Mumbai, 400076, India

Atul Srivastava
Department of Mechanical Engineering, Indian Institute of Technology Bombay, Powai – 400076, Mumbai, India

A. Agrawal
Department of Mechanical Engineering, Indian Institute of Technology, Bombay, Mumbai, 400076, India

要約

The study was undertaken to determine the effect of inclination of impinging synthetic jet on the heat transfer from a uniformly heated flat plate. The average heat transfer coefficient was determined as a function of inclination angle of synthetic jet relative to the plate, for various jet to heated surface spacing (z/d = 3−15) and Reynolds number (Re = 5865). The maximum heat transfer coefficient occurs for normal or direct impingement (Θ = 900) for all spacings. A non-monotonic reduction in the average heat transfer coefficient is observed as the angle of jet impingent is decreased. It is found that the flow is predominantly direct impingement at large impingement angles which changes to cross flow for Θ < 40°. The synthetic jets can be used at the optimum angle of impingement and spacing without serious reduction in average heat transfer coefficient. At an optimal angle of around 60° the average heat transfer coefficient is slightly higher as compared to other angles of impingement. Existence of an optimal angle for such a configuration has not been previously reported for impinging flows. These results are significant for design of cooling solution in space-constrained applications.

ICHMT Digital Library

Bow shocks on a jet-like solid body shape. Thermal Sciences 2004, 2004. Pulsed, supersonic fuel jets - their characteristics and potential for improved diesel engine injection. PULSED, SUPERSONIC FUEL JETS - THEIR CHARACTERISTICS AND POTENTIAL FOR IMPROVED DIESEL ENGINE INJECTION
View of engine compartment components (left). Plots of temperature distributions in centreplane, forward of engine (right). CHT-04 - Advances in Computational Heat Transfer III, 2004. Devel... DEVELOPMENT AND CURRENT STATUS OF INDUSTRIAL THERMOFLUIDS CFD ANALYSIS
Pratt & Whitney's F-135 Joint Strike Fighter Engine under test in Florida is a 3600F class jet engine. TURBINE-09, 2009. Turbine airfoil leading edge stagnation aerodynamics and heat transfe... TURBINE AIRFOIL LEADING EDGE STAGNATION AERODYNAMICS AND HEAT TRANSFER - A REVIEW
Refractive index reconstructed field. (a) Second iteration. (b) Fourth iteration. Radiative Transfer - VI, 2010. Theoretical development for refractive index reconstruction from a radiative ... THEORETICAL DEVELOPMENT FOR REFRACTIVE INDEX RECONSTRUCTION FROM A RADIATIVE TRANSFER EQUATION-BASED ALGORITHM
Two inclusion test, four collimated sources. Radiative Transfer - VI, 2010. New developments in frequency domain optical tomography. Part II. Application with a L-BFGS associated to an inexa... NEW DEVELOPMENTS IN FREQUENCY DOMAIN OPTICAL TOMOGRAPHY. PART II. APPLICATION WITH A L-BFGS ASSOCIATED TO AN INEXACT LINE SEARCH