年間 12 号発行
ISSN 印刷: 1044-5110
ISSN オンライン: 1936-2684
Indexed in
MODELING OF GROUP-HOLE-NOZZLE SPRAYS USING GRID-SIZE-, HOLE-LOCATION-, AND TIME-STEP-INDEPENDENT MODELS
要約
A new spray computational fluid dynamics (CFD) model that comprises gas-jet and radius-of-influence collision, mean collision time, and interpolation method improvements was used to reduce grid-size, hole-location, and time-step dependencies in modeling group-hole-nozzle sprays. The spray model was validated against experimental results obtained from spray visualization and phase Doppler particle analyzer systems. The spray characteristics including spray penetration and droplet sizes of group-hole nozzles were also studied. Standard CFD spray models show significant dependencies of grid size, hole location, and time step for the calculated spray penetration of group-hole nozzles. On the other hand, the new spray model reduced the dependencies successfully for the present nonevaporating spray cases. The calculated results agreed well with the experimental results in terms of both spray penetration and SMD distributions. It was found that the sprays of the group-hole nozzle exhibit similar spray penetrations to those of a single-hole nozzle with the same overall hole area. The computations indicate that the group-hole nozzle has advantages in the near field for reducing spray droplet sizes.
-
Kim J-H, Reitz R D, Park S W, Improvements in the performance and pollutant emissions for stoichiometric diesel combustion engines using a two-spray-angle nozzle, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 224, 8, 2010. Crossref
-
Kim Junghwan, Reitz Rolf D., Park Sung Wook, Sung Kian, Reduction in NOx and CO Emissions in Stoichiometric Diesel Combustion Using a Three-Way Catalyst, Journal of Engineering for Gas Turbines and Power, 132, 7, 2010. Crossref
-
Park Sung Wook, Optimization of combustion chamber geometry for stoichiometric diesel combustion using a micro genetic algorithm, Fuel Processing Technology, 91, 11, 2010. Crossref
-
Abani Neerav, Reitz Rolf D., Diesel engine emissions and combustion predictions using advanced mixing models applicable to fuel sprays, Combustion Theory and Modelling, 14, 5, 2010. Crossref
-
Park Sungwook, Reitz Rolf D., Kim Junghwan, Combustion and emission characteristics of converging group-hole nozzle under lean engine operating conditions, Fuel, 90, 11, 2011. Crossref
-
Kim Hyung Jun, Lee Kwan Soo, Lee Chang Sik, A study on the reduction of exhaust emissions through HCCI combustion by using a narrow spray angle and advanced injection timing in a DME engine, Fuel Processing Technology, 92, 9, 2011. Crossref
-
Gao Jian, Park Sung Wook, Wang Yue, Reitz Rolf D., Moon Seoksu, Nishida Keiya, Simulation and analysis of group-hole nozzle sprays using a gas jet superposition model, Fuel, 89, 12, 2010. Crossref
-
Park Sung Wook, Reitz Rolf D., A gas jet superposition model for CFD modeling of group-hole nozzle sprays, International Journal of Heat and Fluid Flow, 30, 6, 2009. Crossref
-
Lahane Subhash, Subramanian K.A., Impact of nozzle holes configuration on fuel spray, wall impingement and NOx emission of a diesel engine for biodiesel–diesel blend (B20), Applied Thermal Engineering, 64, 1-2, 2014. Crossref
-
Tutak Wojciech, Jamrozik Arkadiusz, Validation and optimization of the thermal cycle for a diesel engine by computational fluid dynamics modeling, Applied Mathematical Modelling, 40, 13-14, 2016. Crossref
-
Gao Yanfei, Yang Shichun, Deng Cheng, Xu Bin, Ji Fenzhu, He Yongling, Breakup, instabilities, and dynamics of high-speed droplet under transcritical conditions, Advances in Mechanical Engineering, 7, 6, 2015. Crossref
-
Greenberg J. B., Interacting Sprays, in Handbook of Atomization and Sprays, 2011. Crossref
-
Ekoto Isaac W., Colban Will F., Miles Paul C., Park Sungwook, Foster David E., Reitz Rolf D., Sources of UHC Emissions from a Light-Duty Diesel Engine Operating in a Partially Premixed Combustion Regime, SAE International Journal of Engines, 2, 1, 2009. Crossref
-
Soudagar Manzoore Elahi M., Banapurmath N. R., Afzal Asif, Hossain Nazia, Abbas Muhammad Mujtaba, Haniffa Mhd Abd Cader Mhd, Naik Bharat, Ahmed Waqar, Nizamuddin Sabzoi, Mubarak N.M., Study of diesel engine characteristics by adding nanosized zinc oxide and diethyl ether additives in Mahua biodiesel–diesel fuel blend, Scientific Reports, 10, 1, 2020. Crossref
-
Kim Daesik, Park Sungwook, Optimization of injection strategy to reduce fuel consumption for stoichiometric diesel combustion, Fuel, 93, 2012. Crossref
-
Park Sungwook, Optimization of combustion chamber geometry and engine operating conditions for compression ignition engines fueled with dimethyl ether, Fuel, 97, 2012. Crossref