ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Atomization and Sprays
インパクトファクター: 1.737 5年インパクトファクター: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN 印刷: 1044-5110
ISSN オンライン: 1936-2684

巻:
巻 30, 2020 巻 29, 2019 巻 28, 2018 巻 27, 2017 巻 26, 2016 巻 25, 2015 巻 24, 2014 巻 23, 2013 巻 22, 2012 巻 21, 2011 巻 20, 2010 巻 19, 2009 巻 18, 2008 巻 17, 2007 巻 16, 2006 巻 15, 2005 巻 14, 2004 巻 13, 2003 巻 12, 2002 巻 11, 2001 巻 10, 2000 巻 9, 1999 巻 8, 1998 巻 7, 1997 巻 6, 1996 巻 5, 1995 巻 4, 1994 巻 3, 1993 巻 2, 1992 巻 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v19.i3.50
pages 283-308

AN APPRAISAL OF SWIRL ATOMIZER INVISCID FLOW ANALYSIS, PART 2: INVISCID SPRAY CONE ANGLE ANALYSIS AND COMPARISON OF INVISCID METHODS WITH EXPERIMENTAL RESULTS FOR DISCHARGE COEFFICIENT, AIR CORE RADIUS, AND SPRAY CONE ANGLE

John Joss Chinn
School of Mechanical, Aerospace, and Civil Engineering, University of Manchester, Sackville Street, M60 1QD, UK

要約

Several methods of deriving an expression for the spray cone half-angle of a swirl atomizer are presented. Expressions found in the literature, based on the inviscid theory, together with suggestions for improvements, are given. The theoretically derived functions for air core diameter and discharge coefficient as functions of atomizer constant that were presented in Part 1 of this article series are charted and compared with experimental results from the literature. Also, the various functions for spray cone half-angle, as a function of the atomizer constant, are charted and compared with the experimental results from the literature. The fit of these theoretical functions with the experimental results are discussed in terms of the flow physics and the limitations of the inviscid theory. This comparison leads to the conclusion that the inviscid theory may be of benefit in the basic understanding of the flow physics of swirl atomizer internal flow. However, it is of limited value for detailed understanding of the complicated flow regime as it does not consider variations in the supply pressure, viscosity, turbulence, wall effects, or fluid-gas interactions. It does allow ballpark estimates for flow rate and for air core size.


Articles with similar content:

AN EXPERIMENTAL STUDY OF LIQUID SPRAYS INDUCED BY A FULL CONE NOZZLE
ICLASS 94
Proceedings of the Sixth International Conference on Liquid Atomization and Spray Systems, Vol.0, 1994, issue
Jean-Marie Buchlin, D. Moreau
SCALING LAWS FOR FREE TURBULENT GAS JETS AND DIESEL-LIKE SPRAYS
Atomization and Sprays, Vol.16, 2006, issue 4
Jose M. Desantes, J. Javier Lopez, Andreas Cronhjort, Jean Arregle
ATOMIZATION : HOW MUCH INFORMATION IS ENOUGH
ICLASS 94
Proceedings of the Sixth International Conference on Liquid Atomization and Spray Systems, Vol.0, 1994, issue
R. W. Sellens
NUMERICAL INVESTIGATION OF VARIOUS SPRAY BREAKUP AND DROPLET COLLISION MODELS IN THE MODELING OF IN-CYLINDER FUEL SPRAY
Atomization and Sprays, Vol.22, 2012, issue 10
M. Mofarrahi, Reza Kamali
Simultaneous measurement of three velocity compo-nents and fluctuating pressure in a turbulent wing-tip vortex
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2009, issue
Shinnosuke Obi, Yoshitsugu Naka, Takuya Kawata, Koji Fukagata