High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
年間 4 号発行
ISSN 印刷: 1093-3611
ISSN オンライン: 1940-4360
IF:
0.4
Immediacy Index:
0.1
Eigenfactor:
0.00005
JCI:
0.07
SJR:
0.198
SNIP:
0.48
CiteScore™::
1.1
H-Index:
20
Indexed in
INVESTIGATION OF PROCESSES USED FOR TREATMENT OF PHARMACOLOGICAL PRODUCTION WASTE IN A PLASMA UNIT
巻 16,
発行 2, 2012,
pp. 139-151
DOI: 10.1615/HighTempMatProc.v16.i2.60
要約
The reacting system is modeled and a setup model is suggested. The process of treatment of chloride-bearing liquid waste in a plasma reactor with air as a plasma-forming gas is simulated. The results of calculation of the composition of reaction products at different temperatures are presented. The structure and operation principle of the plasma reactor model are described and the data obtained in the experiment are presented.
キーワード: thermal plasma technology, treatment of medical waste, plasma reactor, model of the process of high-temperature treatment of medical waste, thermodynamic analysis of thermal plasma treatment of medical waste, model
によって引用された
-
Polyakov Nikita, Chulkin Sergey, Application of plasma-pyrolytic processing of solid radioactive waste on a floating nuclear power plant, IOP Conference Series: Earth and Environmental Science, 578, 1, 2020. Crossref
385 記事の閲覧数
11 記事のダウンロード
記事の統計
類似内容の記事:
最新号
DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE
RHEOLOGICAL BEHAVIOR AND 3D PRINTING OF HIGHLY FILLED ALUMINA-POLYAMIDE FILAMENTS DURING FUSED DEPOSITION MODELING
SCRATCH TESTING OF ZrN COATING ON TI-6AL-4V TITANIUM ALLOY SURFACE PRELIMINARY TREATED BY COMPRESSION PLASMA FLOWS IMPACT
ELECTRON-BEAM SINTERING OF ZIRCONIUM DIOXIDE/TITANIUM CERAMICS FOR MICROELECTRONICS PRODUCTS
THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET
PREPARATION AND THERMOELECTRIC PROPERTIES OF p-TYPE Ag(1-x)Cu(1+x)Te SAMPLES BY SPARK PLASMA SINTERING METHOD
近刊の記事
PLASMA DISCHARGE IN LIQUID MEDIA UNDER THE EFFECT OF ULTRASOUND FOR THE SYNTHESIS OF FILLERS FOR POLYMER COMPOSITES WITH ENHANCED MECHANICAL STRENGTH AND GAS PERMEABILITY
THE QUALITY OF THIN-WALLED STRUCTURES OF AlSi10Mg PRODUCED BY SELECTIVE LASER MELTING
PHYSICAL AND MECHANICAL PROPERTIES AND OPERATIONAL CHARACTERISTICS OF CORONA SPRAYED POWDER COATINGS
Increasing the wear resistance of titanium alloys by deposition of a modifying coating (Zr,Nb)N
Electron-beam synthesis of zirconia ceramic coatings in the forevacuum pressure range
Preparation and Thermoelectric Properties of P-type Ag(1-x)Cu(1+x)Te Samples by SPS Method
The effect of the fluorine concentration in a plasma-forming gas mixture on the chemical composition, surface charge and relief parameters of fluorocarbon coatings on PET
Electron beam sintering of zirconium dioxide/titanium ceramics for microelectronics products