High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
年間 4 号発行
ISSN 印刷: 1093-3611
ISSN オンライン: 1940-4360
IF:
0.4
Immediacy Index:
0.1
Eigenfactor:
0.00005
JCI:
0.07
SJR:
0.198
SNIP:
0.48
CiteScore™::
1.1
H-Index:
20
Indexed in
ANALYSIS OF HEAT TRANSFER PROCESSES BETWEEN ELECTRODES IN CONDITIONS OF LIQUID PHASE PULSE ELECTRIC DISCHARGE FOR METAL TREATMENT BY THE BOW-CONTACT METHOD
巻 10,
発行 4, 2006,
pp. 591-602
DOI: 10.1615/HighTempMatProc.v10.i4.100
要約
In the paper there are presented results of analysis of heat transfer processes in an interelectrode space of a pulse electric discharge in water depending on working behaviors of the equipment in conditions of the bow-contact technology of metal treatment. There were determined such parameters of a power supply and technological conditions of the treatment that a duration of self-stabilizing electric discharges between the instrument and a work piece must be not longer than 1−1.5 ms. In that conditions a relative deterioration of the instrument is minimal (not exceed 15 %).
332 記事の閲覧数
6 記事のダウンロード
記事の統計
類似内容の記事:
最新号
DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE
RHEOLOGICAL BEHAVIOR AND 3D PRINTING OF HIGHLY FILLED ALUMINA-POLYAMIDE FILAMENTS DURING FUSED DEPOSITION MODELING
SCRATCH TESTING OF ZrN COATING ON TI-6AL-4V TITANIUM ALLOY SURFACE PRELIMINARY TREATED BY COMPRESSION PLASMA FLOWS IMPACT
ELECTRON-BEAM SINTERING OF ZIRCONIUM DIOXIDE/TITANIUM CERAMICS FOR MICROELECTRONICS PRODUCTS
THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET
PREPARATION AND THERMOELECTRIC PROPERTIES OF p-TYPE Ag(1-x)Cu(1+x)Te SAMPLES BY SPARK PLASMA SINTERING METHOD
近刊の記事
PLASMA DISCHARGE IN LIQUID MEDIA UNDER THE EFFECT OF ULTRASOUND FOR THE SYNTHESIS OF FILLERS FOR POLYMER COMPOSITES WITH ENHANCED MECHANICAL STRENGTH AND GAS PERMEABILITY
THE QUALITY OF THIN-WALLED STRUCTURES OF AlSi10Mg PRODUCED BY SELECTIVE LASER MELTING
PHYSICAL AND MECHANICAL PROPERTIES AND OPERATIONAL CHARACTERISTICS OF CORONA SPRAYED POWDER COATINGS
Increasing the wear resistance of titanium alloys by deposition of a modifying coating (Zr,Nb)N
Electron-beam synthesis of zirconia ceramic coatings in the forevacuum pressure range
Preparation and Thermoelectric Properties of P-type Ag(1-x)Cu(1+x)Te Samples by SPS Method
The effect of the fluorine concentration in a plasma-forming gas mixture on the chemical composition, surface charge and relief parameters of fluorocarbon coatings on PET
Electron beam sintering of zirconium dioxide/titanium ceramics for microelectronics products