年間 6 号発行
ISSN 印刷: 0278-940X
ISSN オンライン: 1943-619X
Indexed in
Atomic Layer Deposition in Bio-Nanotechnology: A Brief Overview
要約
Atomic layer deposition (ALD) is a technique increasingly used in nanotechnology and ultrathin film deposition; it is ideal for films in the nanometer and Angstrom length scales. ALD can effectively be used to modify the surface chemistry and functionalization of engineering-related and biologically important surfaces. It can also be used to alter the mechanical, electrical, chemical, and other properties of materials that are increasingly used in biomedical engineering and biological sciences.
ALD is a relatively new technique for optimizing materials for use in bio-nanotechnology. Here, after a brief review of the more widely used modes of ALD and a few of its applications in biotechnology, selected results that show the potential of ALD in bio-nanotechnology are presented. ALD seems to be a promising means for tuning the hydrophilicity/hydrophobicity characteristics of biomedical surfaces, forming conformal ultrathin coatings with desirable properties on biomedical substrates with a high aspect ratio, tuning the antibacterial properties of substrate surfaces of interest, and yielding multifunctional biomaterials for medical implants and other devices.
-
Bishal Arghya Kamal, Wee Alvin G., Barão Valentim A.R., Yuan Judy Chia-Chun, Landers Richard, Sukotjo Cortino, Takoudis Christos G., Color stability of maxillofacial prosthetic silicone functionalized with oxide nanocoating, The Journal of Prosthetic Dentistry, 121, 3, 2019. Crossref
-
Cai Jiyu, Ma Zhiyuan, Wejinya Uche, Zou Min, Liu Yuzi, Zhou Hua, Meng Xiangbo, A revisit to atomic layer deposition of zinc oxide using diethylzinc and water as precursors, Journal of Materials Science, 54, 7, 2019. Crossref
-
UĞUR Alper, AY Nuran, ATOMİK KATMAN BİRİKTİRME (ALD) CİHAZLARI VE ÇEŞİTLERİNDEKİ GELİŞMELER, Mühendislik Bilimleri ve Tasarım Dergisi, 6, 4, 2018. Crossref
-
Pessoa Rodrigo Sávio, Fraga Mariana Amorim, Biomedical applications of ultrathin atomic layer deposited metal oxide films on polymeric materials, in Nanostructured Thin Films, 14, 2019. Crossref
-
Kim Gyeongho, Kim Chang-Min, Jeong Jinkyo, Woo Hyun Jae, Kwon Se-Hun, Yang Haesik, Simple electrochemical method for monitoring the time-dependent dissolution behavior of layers deposited by atomic layer deposition, Journal of Electroanalytical Chemistry, 877, 2020. Crossref
-
Sun Jia, Tan Haixin, Lan Shiyi, Peng Fei, Tu Yingfeng, Progress on the fabrication strategies of self-propelled micro/nanomotors, JCIS Open, 2, 2021. Crossref
-
Atsu Saadet Saglam, Aksan Muhammed Emin, Bulut Ali Can, Tamimi Faleh, The effect of nanocoatings of SiO2, TiO2, and ZrO2 on titanium-porcelain bonding, The Journal of Prosthetic Dentistry, 126, 2, 2021. Crossref
-
Spajić Ivan, Rahimi Ehsan, Lekka Maria, Offoiach Ruben, Fedrizzi Lorenzo, Milošev Ingrid, Al2O3 and HfO2 Atomic Layers Deposited in Single and Multilayer Configurations on Titanium and on Stainless Steel for Biomedical Applications, Journal of The Electrochemical Society, 168, 7, 2021. Crossref
-
Zhou Yibin, Wang Jintao, He Ping, Chen Shuming, Chen Zheng, Zang Yingqi, Li Ye, Duan Yu, ALD-Assisted Graphene Functionalization for Advanced Applications, Journal of Electronic Materials, 51, 6, 2022. Crossref
-
Shahmohammadi Mina, Mukherjee Rajib, Sukotjo Cortino, Diwekar Urmila M., Takoudis Christos G., Recent Advances in Theoretical Development of Thermal Atomic Layer Deposition: A Review, Nanomaterials, 12, 5, 2022. Crossref
-
Bitencourt Sandro Basso, Hatton Benjamin D., Bastos-Bitencourt Natália Almeida, dos Santos Daniela Micheline, Pesqueira Aldiéris Alves, De Souza Grace Mendonca, Silica deposition on zirconia via room-temperature atomic layer deposition (RT-ALD): Effect on bond strength to veneering ceramic, Journal of the Mechanical Behavior of Biomedical Materials, 129, 2022. Crossref
-
Hashemi Astaneh Sarah, Faverani Leonardo P., Sukotjo Cortino, Takoudis Christos G., Atomic layer deposition on dental materials: Processing conditions and surface functionalization to improve physical, chemical, and clinical properties - A review, Acta Biomaterialia, 121, 2021. Crossref
-
Sheng Xiao, Wang Ao, Wang Zhonghan, Liu He, Wang Jincheng, Li Chen, Advanced Surface Modification for 3D-Printed Titanium Alloy Implant Interface Functionalization, Frontiers in Bioengineering and Biotechnology, 10, 2022. Crossref
-
Shahmohammadi Mina, Nagay Bruna E., Barão Valentim A.R., Sukotjo Cortino, Jursich Gregory, Takoudis Christos G., Atomic layer deposition of TiO2, ZrO2 and TiO2/ZrO2 mixed oxide nanofilms on PMMA for enhanced biomaterial functionalization, Applied Surface Science, 578, 2022. Crossref
-
Shahmohammadi Mina, Mukherjee Rajib, Takoudis Christos G., Diwekar Urmila M., Optimal design of novel precursor materials for the atomic layer deposition using computer-aided molecular design, Chemical Engineering Science, 234, 2021. Crossref