ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Heat Transfer Research
インパクトファクター: 0.404 5年インパクトファクター: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN 印刷: 1064-2285
ISSN オンライン: 2162-6561

巻:
巻 50, 2019 巻 49, 2018 巻 48, 2017 巻 47, 2016 巻 46, 2015 巻 45, 2014 巻 44, 2013 巻 43, 2012 巻 42, 2011 巻 41, 2010 巻 40, 2009 巻 39, 2008 巻 38, 2007 巻 37, 2006 巻 36, 2005 巻 35, 2004 巻 34, 2003 巻 33, 2002 巻 32, 2001 巻 31, 2000 巻 30, 1999 巻 29, 1998 巻 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2016010264
pages 559-574

NUMERICAL INVESTIGATION OF WALL CURVATURE EFFECTS ON HEAT TRANSFER AND FILM COOLING EFFECTIVENESS

A. Shalchi-Tabrizi
Aerospace Engineering Department, Sharif University of Technology, Tehran, I.R. Iran
M. Taiebi-Rahni
Aerospace Engineering Department, Sharif University of Technology, Tehran, I.R. Iran
Gongnan Xie
Department of Mechanical and Power Engineering, Northwestern Polytechnical University, Xi'an, 710072, Shaanxi, China
Masoud Asadi
Department of Mechanical Engineering, Azad Islamic University Science and Research Branch, Tehran, Iran

要約

In this research, the problems of adiabatic film-cooling the flat, convex, and concave surfaces are investigated numerically. Two different radii of curvature and one row of vertical injection holes are considered. The Navier−Stokes equations are solved using a fine nonuniform multiblock staggered curvilinear grid and the SIMPLE-based finite volume method. The blowing rates are 0.5 and 1.0 and the mainstream Reynolds number is 10,000. The obtained results indicated that at a low blowing ratio, the cooling effectiveness enhances over the convex surface and reduces over the concave surface compared to the flat surface case. In comparison with the low blowing ratio, the curvature effects at a high blowing ratio seem to be less pronounced. At the high blowing ratio, the effectiveness is not greatly influenced by the surface curvature.


Articles with similar content:

Effects of Surface Geometry and Blowing Ratio on Film Cooling Performance at Airfoil Trailing Edge Investigated by Using Large Eddy Simulation
International Heat Transfer Conference 15, Vol.20, 2014, issue
Akira Murata, Kaoru Iwamoto, Ena Mori
FILM-COOLING CHARACTERISTICS OF UPSTREAM RAMP ENHANCED TURBINE BLADE SURFACE COOLING
Heat Transfer Research, Vol.48, 2017, issue 11
Paresh Halder, Jun-Hee Kim, Abdus Samad, Kwang-Yong Kim
CONVERGENCE ANGLES EFFECT ON HEAT TRANSFER CHARACTERISTICS IN A WEDGED DUCT WITH DIMPLES/PROTRUSIONS
Heat Transfer Research, Vol.48, 2017, issue 14
Lei Luo, Songtao Wang, Wei Du, Zhiqi Zhao, Fengbo Wen
FILM COOLING EFFECT OF THE LEAKAGE THROUGH THE SEAM OF ADJACENT TURBINE BLADE PLATFORMS
International Heat Transfer Conference 13, Vol.0, 2006, issue
M. Y. Jabbari, E. J. Thor, Richard J. Goldstein
FILM COOLING FROM TWO ROWS OF HOLES WITH OPPOSITE ORIENTATION ANGLES: INJECTANT BEHAVIORS
Proceedings of Symposium on Energy Engineering in the 21st Century (SEE2000) Volume I-IV, Vol.0, 2000, issue
Joon Ahn, In Sung Jung, Joon Sik Lee