ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Heat Transfer Research
インパクトファクター: 0.404 5年インパクトファクター: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN 印刷: 1064-2285
ISSN オンライン: 2162-6561

巻:
巻 50, 2019 巻 49, 2018 巻 48, 2017 巻 47, 2016 巻 46, 2015 巻 45, 2014 巻 44, 2013 巻 43, 2012 巻 42, 2011 巻 41, 2010 巻 40, 2009 巻 39, 2008 巻 38, 2007 巻 37, 2006 巻 36, 2005 巻 35, 2004 巻 34, 2003 巻 33, 2002 巻 32, 2001 巻 31, 2000 巻 30, 1999 巻 29, 1998 巻 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2018027061
pages 519-543

NUMERICAL STUDY OF THERMAL ENHANCEMENT IN MODIFIED RACCOON MICROCHANNELS

Nishant Tiwari
Department of Mechanical Engineering, National Institute of Technology Rourkela, Rourkela 769008 (Odisha), India
Manoj Kumar Moharana
Department of Mechanical Engineering, National Institute of Technology Rourkela, Rourkela 769008 (Odisha), India

要約

An improved design of raccoon microchannel heat sink with a combined change in wave amplitude and wavelength along the channel length is proposed in this work. A three-dimensional conjugate heat transfer model studies the characteristics of fluid flow and heat transfer numerically. The total channel length is divided into three zones of equal length where the channel expansion factor (α) and waviness (γ) are varied in each zone to create six sets of modified raccoon microchannels (MRMC). The results indicate that changing the waviness (γ) along an equally divided length of the channel in MRMC contributed to disturbance of the core fluid region and intensified the mixing of laminar boundary layer that enhances the thermal performance of the microchannel. The assessment of MRMC is based on the thermal performance factor (η), and the results indicate that there exists an optimal combination of wave amplitude and wavelength arrangement along the channel length, which has an additive effect on the thermal performance. The Nusselt number and friction factor of the new heat-sink design is well demonstrated by comparison with the simple raccoon microchannel (SRMC). In addition, a wide range of parametric variations is also considered to indicate the axial wall conduction effect in raccoon microchannels.


Articles with similar content:

WAVE TRANSMISSION THROUGH A WAVEGUIDE SECTION WITH RANDOMLY CORRUGATED WALLS: A DUAL NATURE OF THE LOCALIZATION
Telecommunications and Radio Engineering, Vol.74, 2015, issue 16
L.D. Shostenko, Yu. V. Tarasov
ENDWALL HEAT TRANSFER AT THE TURN SECTION IN A TWO-PASS SQUARE CHANNEL WITH AND WITHOUT RIBS
Journal of Enhanced Heat Transfer, Vol.20, 2013, issue 4
Lei Wang, Bengt Sunden, Chenglong Wang, Zan Wu, Zahra Ghorbani-Tari
A NUMERICAL INVESTIGATION OF FLOW STRUCTURE AND HEAT TRANSFER ENHANCEMENT IN SQUARE RIBBED CHANNELS WITH DIFFERENTLY POSITIONED DEFLECTORS
Journal of Enhanced Heat Transfer, Vol.20, 2013, issue 3
Bengt Sunden, Gongnan Xie, Shaofei Zheng, Weihong Zhang
Increased Heat Load Effects on the Thermal Performance of Single- and Two-Layered Microchannels with Varying Axial Length and Micro Pin-Fin Inserts
International Journal of Fluid Mechanics Research, Vol.43, 2016, issue 5-6
Olayinka Omowunmi Adewumi, Josua Petrus Meyer, Tunde Bello-Ochende
ADJOINT-BASED SHAPE OPTIMIZATION FOR TURBULENT CONVECTIVE HEAT TRANSFERWITH A HYBRID RANS-DNS APPROACH
International Heat Transfer Conference 16, Vol.14, 2018, issue
Yukinori Kametani, Yosuke Hasegawa