ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
Heat Transfer Research
インパクトファクター: 0.404 5年インパクトファクター: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN 印刷: 1064-2285
ISSN オンライン: 2162-6561

巻:
巻 50, 2019 巻 49, 2018 巻 48, 2017 巻 47, 2016 巻 46, 2015 巻 45, 2014 巻 44, 2013 巻 43, 2012 巻 42, 2011 巻 41, 2010 巻 40, 2009 巻 39, 2008 巻 38, 2007 巻 37, 2006 巻 36, 2005 巻 35, 2004 巻 34, 2003 巻 33, 2002 巻 32, 2001 巻 31, 2000 巻 30, 1999 巻 29, 1998 巻 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2013006258
pages 483-492

EFFECT OF OSCILLATING AIR JETS ON POLYMER DRAWING IN THE MELT BLOWING PROCESS

Lili Wu
College of Textile and Clothing Engineering, National Engineering Laboratory for Modern Silk, Soochow University, Suzhou 215006, China
Ting Chen
College of Textile and Clothing Engineering, National Engineering Laboratory for Modern Silk, Soochow University, Suzhou 215006, China

要約

Melt blowing is a typical process for producing superfine fibers. Use of oscillating air jets can further reduce the fiber diameter. Our Lagrange-type polymer drawing model is employed to simulate the polymer drawing in the oscillating air flow field of the melt blowing process. The predicted fiber diameter of oscillating air jets tallies with the experimental data. The results show that the use of oscillating air jets usually can produce finer fibers compared with those obtained in the case of continuous air jets, which gives us valuable insights into the increase of the efficiency of melt blowing. Experimental results also show that submicron fibers can be produced by using oscillating air jets. If the oscillating technology of melt blowing is optimized, the fabrication of much finer nanofibers can be realized. The transverse displacement of the polymer melt is also predicted. The results show great prospects for this research in the optimization design of melt blowing technology with oscillating air jets.


Articles with similar content:

NUMERICAL SIMULATION OF THE AIR FLOW FIELD IN THE MELT BLOWING PROCESS WITH THE USE OF AN AUXILIARY NOZZLE
Heat Transfer Research, Vol.44, 2013, issue 5
Ting Chen, Yuanling Cheng, Lili Wu
ATOMIZATION OF VISCOUS MELTS
Atomization and Sprays, Vol.15, 2005, issue 2
C. Czisch, P. Schreckenberg, Udo Fritsching, H. Lohner, Klaus Bauckhage
A COMPUTATIONAL STUDY OF THE GENERATION AND DECAY OF AIRCRAFT WINGTIP VORTICES
TSFP DIGITAL LIBRARY ONLINE, Vol.4, 2005, issue
Brian E. Launder, Timothy J. Craft, C. M. E. Robinson
Studies on Swirl Hole Nozzle using ANOVA
International Journal of Fluid Mechanics Research, Vol.38, 2011, issue 6
Himadri Chattopadhyay, Subrata. K. Mandal
STATE AND TRENDS OF THE ELECTRIC ARC FURNACE TECHNOLOGY
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.4, 2000, issue 1
Dieter Neuschutz