ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.149 SNIP: 0.16 CiteScore™: 0.29

ISSN 印刷: 2150-766X
ISSN オンライン: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.2014005311
pages 37-50

TEMPERATURE SENSITIVITY OF GRANULAR PROPELLANTS USING A CONDITIONED CLOSED BOMB

Heath T. Martin
The Pennsylvania State University, University Park, Pennsylvania, USA; The National Aeronautics and Space Administration, Marshall Space Flight Center, Huntsville, Alabama, USA
Baoqi Zhang
Department of Mechanical and Nuclear Engineering The Pennsylvania State University, University Park, PA 16802 USA
Kenneth K. Kuo
Department of Mechanical and Nuclear Engineering, The Pennsylvania State University, University Park, PA 16802, USA

要約

In this study, a temperature-conditioned closed-bomb facility was employed to determine the temperature sensitivity of granular M48 double-base propellant, as part of a larger study on the effect of initial temperature on the interior ballistics and overall performance of the U.S. Army's 120-mm mortar system. In order to determine the temperature sensitivity of the propellant over a broad range of applicable conditions, at least three test firings were performed at each of four different initial temperatures: −47, −12, 21, and 63° C. The pressure histories recorded from each of these firings were used to deduce the linear burning rate ofM48 propellant as a function of pressure. In addition to the pressure measurements, non-intrusive acoustic emission technology was utilized in the closed-bomb tests to study the effect of initial temperature on the ignition delay of this propellant. Temperature sensitivity was found to be a constant equal to 0.37%/°C with pressure and for initial temperature between −12 and 63°C. However, the deduced burning rate at −47°C is greater than that at −12°C, leading to a temperature sensitivity of −0.07%/°C for initial temperatures below −12°C. Propellant grain fracture seems an unlikely explanation for this observation because the burning rate and vivacity behavior at −47°C mirrors that at the higher temperatures. The acoustic emission records have demonstrated an Arrhenius-type relationship between ignition delay time and initial temperature, which suggests that the propellant decomposition mechanism is not changing with temperature.


Articles with similar content:

ON CHEMICAL KINETICS OF THE IGNITION OF AP / NSAN / INERT BINDER COMPOSITE PROPELLANTS
International Journal of Energetic Materials and Chemical Propulsion, Vol.4, 1997, issue 1-6
Octavia Frota, Luis Araujo
COMBUSTION MECHANISM OF TETRA-OL GLYCIDYL AZIDE POLYMER AND ITS APPLICATION TO HYBRID ROCKETS
International Journal of Energetic Materials and Chemical Propulsion, Vol.8, 2009, issue 6
Nobuyuki Tsuboi, Kiyokazu Kobayashi, Makihito Nishioka, Keiichi Hori, Yoshio Seike, Yutaka Wada, Toru Shimada, Katsuya Hasegawa
TRANSIENT BURNING BEHAVIOR OF PHASE-STABILIZED AMMONIUM NITRATE BASED AIRBAG PROPELLANT
International Journal of Energetic Materials and Chemical Propulsion, Vol.11, 2012, issue 5
Eric Boyer, Jonathan T. Essel, Baoqi Zhang, Kenneth K. Kuo
DIAGNOSTIC TOOLS FOR STUDIES ON BURN-RATE BEHAVIOR OF ADVANCED SOLID PROPELLANTS
International Journal of Energetic Materials and Chemical Propulsion, Vol.3, 1994, issue 1-6
A. N. Nazare, S. S. Dhar, Haridwar Singh, S. N. Asthana, P. G. Shrotri
BEHAVIOR OF HYDROXYL-TERMINATED POLYETHER (HTPE) COMPOSITE ROCKET PROPELLANTS IN SLOW COOK-OFF
International Journal of Energetic Materials and Chemical Propulsion, Vol.7, 2008, issue 3
Rodrigo I. Caro, John M. Bellerby