ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.149 SNIP: 0.16 CiteScore™: 0.29

ISSN 印刷: 2150-766X
ISSN オンライン: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.v9.i3.60
pages 267-284

PREPARATION AND CHARACTERIZATION OF GRANULAR HYBRID REACTIVE MATERIALS

Alexandre Ermoline
New Jersey Institute of Technology, Newark, New Jersey, 07102, USA
Yasmine Aly
New Jersey Institute of Technology, Newark, New Jersey, USA
Mikhaylo A. Trunov
Reactive Metals, Inc., Newark, New Jersey, USA
Mirko Schoenitz
New Jersey Institute of Technology, Newark, New Jersey 07102, USA
Edward L. Dreizin
New Jersey Institute of Technology, Newark, New Jersey 07102, USA; Tomsk State University, Tomsk, 634050, Russia

要約

The feasibility of preparing granular hybrid reactive materials (GHRM) comprised of an Al matrix and micrometer-sized nanocomposite thermite inclusions using in situ consolidation by mechanical milling is established. The starting components were Al and nanocomposite Al-CuO and Al-MoO3 thermite powders with various specific compositions. The nanocomposite powders were prepared using arrested reactive milling. Both shaker and planetary mills were successfully used to prepare samples of GHRM particles with sizes ranging from approximately 0.1 to 1 mm. Prepared particles were size classified and characterized by electron microscopy and x-ray diffraction. Specifically, the effects of milling conditions and compositions on the particle size distributions, mixing uniformity, and structures of the prepared hybrid particles were studied. A continuous CO2 laser was used to ignite the hybrid particles in air. Combustion emission was recorded using a photodiode and the experiments were visualized using high-speed video records. It was observed that the ignition delays are much shorter for GHRM particles when compared to similarly sized Al. The optical emission produced by burning GHRM particles is substantially stronger than that for similarly sized Al, and unlike for Al particles, GHRM particle combustion is accompanied by multiple fragmentation events. Combustion times for GHRM particles are much shorter than for similarly sized Al. Once ignited by the laser beam, combustion of GHRM particles continues if a suitable oxidizer is present.


Articles with similar content:

PARTICLE COMBUSTION DYNAMICS OF METAL-BASED REACTIVE MATERIALS
International Journal of Energetic Materials and Chemical Propulsion, Vol.10, 2011, issue 4
Yasmine Aly, Shasha Zhang, Carlo Badiola, Edward L. Dreizin
EFFECTS OF PRESSURE ON THE COMBUSTION OF ALUMINUM AGGLOMERATES
International Heat Transfer Conference 13, Vol.0, 2006, issue
K. Meftah, Ke Nguyen
OXIDATION, IGNITION AND COMBUSTION OF AL-HYDROCARBON COMPOSITE REACTIVE POWDERS
International Journal of Energetic Materials and Chemical Propulsion, Vol.11, 2012, issue 4
Shasha Zhang, Mirko Schoenitz, Edward L. Dreizin
IGNITION AND COMBUSTION OF NICKEL COATED AND UNCOATED ALUMINUM PARTICLES IN HOT POST-FLAME ENVIRONMENT
International Journal of Energetic Materials and Chemical Propulsion, Vol.11, 2012, issue 1
Ryan W. Houim, Eric Boyd, Kenneth K. Kuo
PREPARATION AND CHARACTERIZATION OF SUBMICRON 3,3’-DIAMINO-4,4’-AZOXYFURAZAN
International Journal of Energetic Materials and Chemical Propulsion, Vol.15, 2016, issue 6
Xiao-Heng Geng, Yan Liu, Jin Luo, Jing-Yu Wang, Chongwei An