ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.142 SNIP: 0.16 CiteScore™: 0.29

ISSN 印刷: 2150-766X
ISSN オンライン: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.2013003803
pages 375-388

EFFECT OF BALLISTIC MODIFIERS ON THE BURN RATE OF EXTRUDED COMPOSITE PROPELLANT FORMULATIONS BASED ON THERMOPLASTIC ELASTOMERIC BINDER

K. S. Mulage
High Energy Materials Research Laboratory, Sutarwadi, Pune-411 021, India
A. K. Mishra
High Energy Materials Research Laboratory, Sutarwadi, Pune-411 021, India
R. N. Patkar
High Energy Materials Research Laboratory, Sutarwadi, Pune-411 021, India
S. H. Kharat
High Energy Materials Research Laboratory, Sutarwadi, Pune-411 021, India
Pawan Kumar Khanna
Defence Institute of Advanced Technology, Pune, 411025, India
Seema Dilip Kakade
High Energy Materials Research Laboratory, Pune, 411021, India

要約

The effect of ballistic modifiers on the burn rate of extruded composite propellant (ECP) formulations primarily based on ammonium perchlorate (AP) as oxidizer, aluminum (Al) as metallic fuel, and thermoplastic polyurethane, viz., Irostic® as binder, has been investigated. The ballistic modifiers, viz., iron oxide (Fe2O3), copper chromite (CuCr2O4), and strontium carbonate (SrCO3), were studied in the concentration varying from 0.2 to 1.0 part above 100 parts of base composition. The results obtained reveal that the burn rate increases with increase in the concentration of Fe2O3 and CuCr2O4. Maximum burn rate enhancement is observed with 1 part of Fe2O3, which is of the order of 130%. The results are discussed in detail in the light of thermal decomposition data generated on polymer and propellant compositions using ballistic modifiers.


Articles with similar content:

EVALUATION OF NANO-Fe3O4 IN COMPOSITE PROPELLANT FORMULATIONS
International Journal of Energetic Materials and Chemical Propulsion, Vol.12, 2013, issue 6
D. R. Kshirsagar, P. P. Singh, B. Bhattacharya, Mehilal, Sudhir
FORMULATION, CASTING, AND EVALUATION OF PARAFFIN-BASED SOLID FUELS CONTAINING ENERGETIC AND NOVEL ADDITIVES FOR HYBRID ROCKETS
International Journal of Energetic Materials and Chemical Propulsion, Vol.14, 2015, issue 6
Thomas J. Curtiss, Eric Boyer, Daniel B. Larson, George Story, Trevor Wachs, Joseph H. Koo, John D. DeSain, Brian B. Brady, Kenneth K. Kuo, Russell Borduin
EFFECT OF FE2O3 ON THE MATERIAL PROPERTIES OF AP/AL/HTPB BASED PROPELLANTS
International Journal of Energetic Materials and Chemical Propulsion, Vol.4, 1997, issue 1-6
J. Covino, A. J. Lindfors, J. M. Boteler
THERMITE-BASED COMBUSTION SYNTHESIS OF NIOBIUM SILICIDES/Al2O3 COMPOSITES
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.16, 2012, issue 1
Yu-Shan Huang, Chun-Liang Yeh
Thermal Conductivity Enhancement for Aqueous Alumina Nano-Suspensions in the Presence of Surfactant
Journal of Enhanced Heat Transfer, Vol.16, 2009, issue 2
Nan Wang, Xianju Wang, Jinwei Gao, Xinfang Li, Dongsheng Zhu