ライブラリ登録: Guest
Begell Digital Portal Begellデジタルライブラリー 電子書籍 ジャーナル 参考文献と会報 リサーチ集
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.149 SNIP: 0.16 CiteScore™: 0.29

ISSN 印刷: 2150-766X
ISSN オンライン: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.2019027842
pages 303-319

THERMOCHEMICAL PROPERTIES AND LASER-IGNITION PERFORMANCE OF Al/CuMoO4, Al/CuO/MoO3, Al/CuO AND Al/MoO3 NANOTHERMITES

Catalin Florin Petre
Defence Research and Development Canada – Valcartier, Québec, QC, G3J 1X5, Canada
David G. Kelly
Royal Military College, Kingston, ON, K7K 7B4, Canada
Daniel Chamberland
Defence Research and Development Canada – Valcartier, Québec, QC, G3J 1X5, Canada
Tommy Ringuette
Numerica Technologies Inc., Québec (QC), G3J 1X5, Canada

要約

Nanothermites represent materials of high energy density and reaction rate which also exhibit sensitivity to friction initiation and electrostatic discharge (ESD). New nanothermite materials based on the perovskite CuMoO4 have been produced by resonant acoustic mixing and compared to the corresponding nanothermites containing MoO3 and CuO oxidants. Three fuels have been used in the study, containing oxide (O-Al) passivation or palmitic acid (L-Al) and Viton (V-Al) coatings. Whilst the materials show intermediate friction and ESD sensitivity between molybdenum and copper nanothermites, a friction sensitivity of 96 N and ESD minimum ignition of > 0.156 J is achieved using V-Al fuels, which is markedly improved relative to MoO3-based nanothermites. All three CuMoO4-based nanothermite fuels reacted rapidly under thermochemical conditions in argon at ≤ 500°C. Reactions are complete over a few degrees of the heating cycle, rather than a few hundred degrees for the MoO3 and CuO nanothermites. Contrary to the reaction under thermochemical conditions (ignition by constant heating), the low power laser initiated (ignition by hot-spot) perovskite thermite had shown less reactivity when compared to the other nanothermites. The most reactive nanothermite to laser ignition was found to be the Al/CuO/MoO3 nanothermite. Therefore, both the binary oxide and perovskite should be considered as a distinct nanothermite system, with properties that are different than individual MoO3 and CuO systems.


Articles with similar content:

BULK CATALYST FOR NITROUS OXIDE DECOMPOSITION IN SPACE THRUSTERS
International Journal of Energetic Materials and Chemical Propulsion, Vol.15, 2016, issue 2
Andre Navarro de Miranda, Sayuri Okamoto, Luis Gustavo Ferroni Pereira, Leandro José Maschio, Ricardo Vieira
FORMULATION, CASTING, AND EVALUATION OF PARAFFIN-BASED SOLID FUELS CONTAINING ENERGETIC AND NOVEL ADDITIVES FOR HYBRID ROCKETS
International Journal of Energetic Materials and Chemical Propulsion, Vol.14, 2015, issue 6
Thomas J. Curtiss, Eric Boyer, Daniel B. Larson, George Story, Trevor Wachs, Joseph H. Koo, John D. DeSain, Brian B. Brady, Kenneth K. Kuo, Russell Borduin
PARAFFIN-BASED SOLID FUELS FOR HYBRID PROPULSION FILLED WITH LITHIUM ALUMINUM HYDRIDE: THERMAL, MECHANICAL, AND BALLISTIC CHARACTERIZATION
International Journal of Energetic Materials and Chemical Propulsion, Vol.15, 2016, issue 6
Matteo Boiocchi, Luca Di Landro, Luciano Galfetti
DECOMPOSITION AND PERFORMANCEOFNEW HIGH NITROGEN PROPELLANTS AND EXPLOSIVES
International Journal of Energetic Materials and Chemical Propulsion, Vol.6, 2007, issue 2
Steven F. Son, Bryce C. Tappan, David E. Chavez, Michael A. Hiskey, Arif N. Ali
LOW-POWER LASER IGNITION OF ALUMINUM/METAL OXIDE NANOTHERMITES
International Journal of Energetic Materials and Chemical Propulsion, Vol.13, 2014, issue 6
Daniel Chamberland, Robert Stowe, Tommy Ringuette, Sophie Ringuette, Catalin Florin Petre, Suzanne Paradis