RT Journal Article ID 1e60e9893e3090ed A1 Addessi, Daniela A1 Gatta, C. A1 Marfia, S. A1 Sacco, E. T1 MULTISCALE ANALYSIS OF IN-PLANE MASONRY WALLS ACCOUNTING FOR DEGRADATION AND FRICTIONAL EFFECTS JF International Journal for Multiscale Computational Engineering JO JMC YR 2020 FD 2020-04-21 VO 18 IS 2 SP 159 OP 180 K1 masonry K1 multiscale analysis K1 TFA K1 interfaces K1 damage-friction K1 nonlinear homogenization AB A multiscale model for the analysis of the in-plane response of periodic masonry walls is presented. The overall constitutive behavior of the composite material is derived through a homogenization procedure based on the Transformation Field Analysis properly extended to the case of interfaces. At micro level, masonry is modeled as the assembly of expanded units and interfaces representing both mortar and unit-mortar interaction. A nonlinear constitutive law accounting for damage and friction phenomena is considered for joints, whereas a linear elastic constitutive relationship is assumed for the blocks. The proposed multiscale procedure is implemented into a Finite Element code, where the mesh-dependency occurring in presence of strain softening response is overcome by adopting a nonlocal integral formulation at macro level. Validation examples are carried out: first, the response of a representative masonry Unit Cell is analyzed comparing results obtained with the presented homogenization procedure with those recovered by detailed nonlinear finite element analyses. Then, the structural behavior of masonry panels subjected to compression-shear loads is studied. The results obtained with the multiscale model, in terms of global force-displacement response curves and damage distributions, are compared with both micromechanical and experimental outcomes. PB Begell House LK https://www.dl.begellhouse.com/journals/61fd1b191cf7e96f,453304c124256f66,1e60e9893e3090ed.html