Library Subscription: Guest
Begell Digital Portal Begell Digital Library eBooks Journals References & Proceedings Research Collections
International Journal of Fluid Mechanics Research
ESCI SJR: 0.206 SNIP: 0.446 CiteScore™: 0.9

ISSN Print: 2152-5102
ISSN Online: 2152-5110

Volumes:
Volume 47, 2020 Volume 46, 2019 Volume 45, 2018 Volume 44, 2017 Volume 43, 2016 Volume 42, 2015 Volume 41, 2014 Volume 40, 2013 Volume 39, 2012 Volume 38, 2011 Volume 37, 2010 Volume 36, 2009 Volume 35, 2008 Volume 34, 2007 Volume 33, 2006 Volume 32, 2005 Volume 31, 2004 Volume 30, 2003 Volume 29, 2002 Volume 28, 2001 Volume 27, 2000 Volume 26, 1999 Volume 25, 1998 Volume 24, 1997 Volume 23, 1996 Volume 22, 1995

International Journal of Fluid Mechanics Research

DOI: 10.1615/InterJFluidMechRes.v25.i4-6.350
pages 833-843

Splash-Zone Heat Transfer in Bubbling Fluidized Beds: an Experimental Study of Temperature Effects

David Pidwerbecki
Department of Mechanical Engineering, Oregon State University, Corvallis, OR 97331, USA
James R. Welty
Department Mechanical Engineering, Oregon State University, 204 Rogers Hall, Corvallis, Oregon - 97331, USA

ABSTRACT

Experimental results are reported for the heat transfer between a high temperature fluidized bed and a horizontal tube located within the splash-zone. Of specific interest in this study is the effect of bed temperature. Four bed operating temperatures, 700 K, 810 K, 908 K, and 1003 K, were investigated. At each temperature, five circumferential local time averaged values of the total and radiative heat transfer coefficients were measured for three tube locations. The tube was located at 406 mm, 64 mm, and -133 mm relative to the packed bed-freeboard interface. These locations are representative of a tube in the freeboard, splash-zone, and totally immersed in the bed, respectively. The tube outside diameter was 51 mm, the mean bed particle size was 2.9 mm, and the fluidizing velocity varied from near minimum fluidization conditions (Umf) to over 1.5 Umf. The work was performed in the Oregon State University high temperature fluid-ized-bed test facility.


Articles with similar content:

SPLASH-ZONE HEAT TRANSFER IN BUBBLING FLUIDIZED BEDS: AN EXPERIMENTAL STUDY OF TEMPERATURE EFFECTS
Transport Phenomena in Thermal Engineering. Volume 2, Vol.0, 1993, issue
James R. Welty, David Pidwerbecki
INVESTIGATION OF HEAT TRANSFER IN BED AND FREEBOARD OF FLUIDIZED BED COMBUSTORS
International Heat Transfer Conference 8, Vol.5, 1986, issue
V. V. Matsnev, A. P. Sorokin, V. V. Mitor
Mutual diffusion coefficients of the systems (Rb,Ag)Cl and (Alk,Ag)NO3 with Alk = Li, Na, K, Rb, and Cs, measured with interferometric methods
Advances in Molten Salts, Vol.0, 1998, issue
Axel Leuchter, Joachim Richter
COMPARATIVE DRYING CHARACTERISTICS OF AGRICULTURAL PRODUCT IN BUBBLING FLUIDIZED BED (BFB) AND ROTATING FLUIDIZED BED IN A STATIC GEOMETRY (RFB-SG) DRYER
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Vol.0, 2017, issue
J. De Wilde, J. R. Pati, Pinakeswar Mahanta
Mutual Diffusion Coefficients of the Systems (Rb,Ag)Cl and (Alk,Ag)N03 with Alk = Li, Na, K, Rb, and Cs, Measured with Interferometric Methods
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.2, 1998, issue 4
Axel Leuchter