Heat Transfer Research
Published 18 issues per year
ISSN Print: 1064-2285
ISSN Online: 2162-6561
IF:
1.7
5-Year IF:
1.4
Immediacy Index:
0.6
Eigenfactor:
0.00072
JCI:
0.43
SJR:
0.318
SNIP:
0.568
CiteScore™::
3.5
H-Index:
28
Indexed in
The Identification of Mass Transfer Parameters in the Diffusion and Oxidation Model for Alloys in Gas Turbine Blades
Volume 29,
Issue 6-8, 1998,
pp. 374-382
DOI: 10.1615/HeatTransRes.v29.i6-8.20
Get access
ABSTRACT
The study presents the formulation of and results of solving inverse mass transfer problems for oxidation and diffusion processes in alloys used in gas turbine blades.
The study also presents the method and results of solving theoretical and practical problems of identifying diffusion and absorption coefficients of the alloying element and oxidant in the alloy and a mass transfer coefficient of the oxidant between the gas medium and the surface of the oxidized alloy entering into the mathematical model previously considered by the authors.
348 Article views
2 Article downloads
Metrics
Articles with similar content:
Latest Issue
A TEMPERATURE PRE-RECTIFIER WITH CONTINUOUS HEAT STORAGE AND RELEASE FOR WASTE HEAT RECOVERY FROM PERIODIC FLUE GAS
INVESTIGATION OF THE EFFECT OF DEAD-STATE TEMPERATURE ON THE PERFORMANCE OF BORON-ADDED FUELS AND DIFFERENT FUELS USED IN AN INTERNAL COMBUSTION ENGINE
PREDICTION OF PARAMETERS OF BOILER SUPERHEATER BASED ON TRANSFER LEARNING METHOD
TEMPERATURE CORRECTION METHOD OF RADIATION THERMOMETER BASED ON THE NONLINEAR MODEL FITTED FROM SPECTRAL EMISSIVITY MEASUREMENTS OF Ni-BASED ALLOY
ANALYSIS OF THERMAL PERFORMANCE IN A TWO-PHASE THERMOSYPHON LOOP BASED ON FLOW VISUALIZATION AND AN IMAGE PROCESSING TECHNIQUE
Forthcoming Articles
Effect of Metal Foam Filling Position and Porosity on Heat Transfer of PCM: A Visualized Experimental Study
Modeling the Influence of Nanoparticles and Gyrotactic Microorganisms on Natural Convection in a Heated Square Cavity: A New Machine-Learning Study
Optimization of Micro Heat Sink with Repetitive pattern of Obstacles for Electronic Cooling Applications
Experimental Investigation on the Application Potential of Finless Heat Exchanger with Mini-Diameter Tubes Utilized as Air Heater or Air Cooler
Effective Efficiency Analysis of Artificially Roughed Solar Air Heater
Energy, Exergy-Emission Performance Investigation of Heat Exchanger with Turbulators Inserts and Ternary Hybrid Nanofluid
A temperature pre-rectifier with continuous heat storage and release for waste heat recovery from periodic flue gas
Examining the Synergistic Use of East-West Reflector and Coal Cinder in Trapezoidal Solar Pond through Energy Analysis