Abonnement à la biblothèque: Guest
Archives
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017)


ISBN En ligne: 978-1-56700-478-6

EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER ENHANCEMENT FROM MULTIPLE DIMPLED SURFACES IN RECTANGULAR CHANNEL

DOI: 10.1615/IHMTC-2017.570
pages 423-428

Sachin G. Ilag
Pune Institute of Computer Technology , Pune 411043, Savitribai Phule Pune University, Pune, India

Sunil V. Dingare
MAEER's MIT College of Engineering, Pune 411038 Savitribai Phule Pune University, Pune, India

Sandeep S. Kore
Department of Mechanical Engineering, Vishwakarma Institute of Information Technology, Pune 411048, India

Résumé

The heat transfer coefficient between the plate and surrounding flowing fluid can be considerably increased by using artificial roughness. Under the present work, an experimental study has been carried out to investigate the effect of roughness and operating parameters on heat transfer and friction factor in a roughened duct provided with dimpleshape roughness geometry. Investigation carried out for two configurations (single print diameter and double print diameter dimple), having print diameter 10mm and 5mm respectively, that covered the range of Reynolds number (Re) from 4,000 to 25, 000, and relative horizontal roughness pitch (p) varied from 20, 22, and 24mm for both configurations. The ratios of dimple depth to dimple print diameter (δ/D) is kept constant 0.3. Based on the experimental data, values of Nusselt number (Nu) and friction factor (f) have been determined for different values of roughness and operating parameters. In order to determine the enhancement in heat transfer and increment in friction factor values of Nusselt number and friction factor have been compared with those of smooth duct under similar flow conditions.