Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
Atomization and Sprays
Facteur d'impact: 1.262 Facteur d'impact sur 5 ans: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Imprimer: 1044-5110
ISSN En ligne: 1936-2684

Volume 29, 2019 Volume 28, 2018 Volume 27, 2017 Volume 26, 2016 Volume 25, 2015 Volume 24, 2014 Volume 23, 2013 Volume 22, 2012 Volume 21, 2011 Volume 20, 2010 Volume 19, 2009 Volume 18, 2008 Volume 17, 2007 Volume 16, 2006 Volume 15, 2005 Volume 14, 2004 Volume 13, 2003 Volume 12, 2002 Volume 11, 2001 Volume 10, 2000 Volume 9, 1999 Volume 8, 1998 Volume 7, 1997 Volume 6, 1996 Volume 5, 1995 Volume 4, 1994 Volume 3, 1993 Volume 2, 1992 Volume 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2017020387
pages 723-739


Bruno Beban
Technical University of Munich, Department of Mechanical Engineering, Chair of Aerodynamics and Fluid Mechanics, Germany
S. J. Schmidt
Chair of Aerodynamics and Fluid Mechanics, Department of Mechanical Engineering, Technical University of Munich, 85748 Garching bei München, Germany
N. A. Adams
Technical University of Munich, Department of Mechanical Engineering, Chair of Aerodynamics and Fluid Mechanics, Germany


We investigate by numerical simulation a highly unsteady cavitating flow of ISO 4113 test fuel in the valve chamber of a Diesel common rail injection system. Two-phase modeling is based on a single-fluid approach and a homogeneous mixture model. A fully compressible flow solver, taking into account the compressibility of liquid and liquid–vapor mixture, is employed. Computational results for two similar designs are presented. We discuss the cavity dynamics and reverse flow development in the discharge throttles for a pressure drop of approximately 2000 bar and choked flow conditions. The focus of this study is placed on inertia-driven effects and formation of collapse-induced pressure peaks, which allows us to apply an inviscid flow model. Our contribution assesses the erosion risk by monitoring maximum instantaneous wall pressures and employing a collapse detector algorithm for the identification of implosions of isolated vapor clouds. High-speed liquid jet discharging from the throttle, accompanied by supercavitation and reverse motion in the throttle, is predicted by the numerical simulation. Collapse pressures higher than 1 GPa are observed near material surfaces, resulting in high surface loads which can eventually lead to material erosion.