Publication de 6 numéros par an
ISSN Imprimer: 1543-1649
ISSN En ligne: 1940-4352
Indexed in
Microstructure-Based Multiscale Constitutive Modeling of γ γ′ Nickel-Base Superalloys
RÉSUMÉ
A hierarchical system of microstructure-based constitutive models for cyclic deformation and low cycle fatigue (LCF) behavior of two-phase nickel-base superalloys is developed and implemented. Both precipitate (γ′) and matrix (γ) phases with or without smaller dispersed precipitates are explicitly modeled using crystal viscoplasticity theory with dislocation density as an internal state variable. The constitutive models are capable of capturing most of the important features of the deformation behavior of Ni-base superalloys, namely, (i) anomalous yield stress behaviors with respect to temperature and tension-compression asymmetry of flow stress due to non-Schmid effects; (ii) crystallographic orientation dependence represented by the crystal plasticity model; (iii) effects of γ′ precipitate size and spacing on initial yield strength and work hardening; and (iv) effects of precipitate distribution and morphology on localized cyclic plastic shear strain. The physically based hardening laws are employed to evolve dislocation densities for both phases in each slip system with consideration of dislocation interaction mechanisms. This type of' microstructure-sensitive constitutive model is applicable to the study of the effects of variability of microstructure on variability of LCF and creep behaviors or properties. A combined bottom-up and top-down strategy is used to determine model parameters to support simulations at length scales ranging from approximately 100 nm up to hundreds of microns. Models for γ′ precipitates are calibrated using bulk Ni3Al single-crystal data. The γ γ′ two-phase models are calibrated for several superalloys and strain histories, providing good agreement with experiments. The utility of such models in modeling behavior at several characteristic length scales is briefly discussed.
-
McDowell D. L., Olson G. B., Concurrent design of hierarchical materials and structures, Scientific Modeling and Simulation SMNS, 15, 1-3, 2008. Crossref
-
Neu R. W., Smith D. J., Saxena A., Dogan B., Dean S. W., Modeling Creep-Fatigue Deformation of Ni-Base Superalloys Using Crystal Viscoplasticity, Journal of ASTM International, 8, 5, 2011. Crossref
-
McDowell David L., Viscoplasticity of heterogeneous metallic materials, Materials Science and Engineering: R: Reports, 62, 3, 2008. Crossref
-
Shenoy Mahesh, Tjiptowidjojo Yustianto, McDowell David, Microstructure-sensitive modeling of polycrystalline IN 100, International Journal of Plasticity, 24, 10, 2008. Crossref
-
McDowell David L., A perspective on trends in multiscale plasticity, International Journal of Plasticity, 26, 9, 2010. Crossref
-
Fromm Bradley S., Chang Kunok, McDowell David L., Chen Long-Qing, Garmestani Hamid, Linking phase-field and finite-element modeling for process–structure–property relations of a Ni-base superalloy, Acta Materialia, 60, 17, 2012. Crossref
-
Kalyanasundaram V., Saxena A., Holdsworth S.R., WITHDRAWN: Dislocation-based constitutive modeling of martensitic/ferritic steels at elevated temperatures. Part II: Cyclic behavior without hold time effects, International Journal of Plasticity, 2013. Crossref
-
Rodas E.A. Estrada, Gorgannejad S., Neu R.W., Neu R.W., Dyer Z., Draa P.M., Shinde and S.R., On the Development of ICME Tools for Creep and Aging of CMSX®-8, in Superalloys 2016, 2016. Crossref
-
Ghorbanpour Saeede, Zecevic Milovan, Kumar Anil, Jahedi Mohammad, Bicknell Jonathan, Jorgensen Luke, Beyerlein Irene J., Knezevic Marko, A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and cyclic deformation of Inconel 718, International Journal of Plasticity, 99, 2017. Crossref
-
Estrada Rodas Ernesto A., Neu Richard W., Crystal viscoplasticity model for the creep-fatigue interactions in single-crystal Ni-base superalloy CMSX-8, International Journal of Plasticity, 100, 2018. Crossref
-
McDowell D. L., Olson G. B., Concurrent design of hierarchical materials and structures, in Scientific Modeling and Simulations, 68, 2008. Crossref
-
McDowell D. L., Backman D., Simulation-Assisted Design and Accelerated Insertion of Materials, in Computational Methods for Microstructure-Property Relationships, 2011. Crossref
-
Kirka M. M., Smith D. J., Neu R. W., Efficient Methodologies for Determining Temperature-Dependent Parameters of a Ni-Base Superalloy Crystal Viscoplasticity Model for Cyclic Loadings, Journal of Engineering Materials and Technology, 136, 4, 2014. Crossref
-
Xiao Jian-feng, Cui Hai-tao, Zhang Hong-jian, Wen Wei-dong, A united tension/compression asymmetry micro-mechanical model for nickel-base single-crystal alloys, Journal of Iron and Steel Research International, 26, 6, 2019. Crossref
-
Xiao Jianfeng, Cui Haitao, Zhang Hongjian, Wen Weidong, Zhou Jie, A physical-based constitutive model considering the motion of dislocation for Ni3Al-base superalloy, Materials Science and Engineering: A, 772, 2020. Crossref
-
Lu Pin, Ge Yuxue, Jin Xiaochao, Li Pan, Ji Xinkuo, Zhao Dan, Wang Zhihua, Fan Xueling, A dislocation density-based model for the temperature dependent anomalous behaviors of nickel-based single-crystal superalloy, Mechanics of Materials, 170, 2022. Crossref